SUBROUTINE DLAEXC( WANTQ, N, T, LDT, Q, LDQ, J1, N1, N2, WORK,
     $                   INFO )
*
*  -- LAPACK auxiliary routine (version 3.1) --
*     Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd..
*     November 2006
*
*     .. Scalar Arguments ..
      LOGICAL            WANTQ
      INTEGER            INFO, J1, LDQ, LDT, N, N1, N2
*     ..
*     .. Array Arguments ..
      DOUBLE PRECISION   Q( LDQ, * ), T( LDT, * ), WORK( * )
*     ..
*
*  Purpose
*  =======
*
*  DLAEXC swaps adjacent diagonal blocks T11 and T22 of order 1 or 2 in
*  an upper quasi-triangular matrix T by an orthogonal similarity
*  transformation.
*
*  T must be in Schur canonical form, that is, block upper triangular
*  with 1-by-1 and 2-by-2 diagonal blocks; each 2-by-2 diagonal block
*  has its diagonal elemnts equal and its off-diagonal elements of
*  opposite sign.
*
*  Arguments
*  =========
*
*  WANTQ   (input) LOGICAL
*          = .TRUE. : accumulate the transformation in the matrix Q;
*          = .FALSE.: do not accumulate the transformation.
*
*  N       (input) INTEGER
*          The order of the matrix T. N >= 0.
*
*  T       (input/output) DOUBLE PRECISION array, dimension (LDT,N)
*          On entry, the upper quasi-triangular matrix T, in Schur
*          canonical form.
*          On exit, the updated matrix T, again in Schur canonical form.
*
*  LDT     (input)  INTEGER
*          The leading dimension of the array T. LDT >= max(1,N).
*
*  Q       (input/output) DOUBLE PRECISION array, dimension (LDQ,N)
*          On entry, if WANTQ is .TRUE., the orthogonal matrix Q.
*          On exit, if WANTQ is .TRUE., the updated matrix Q.
*          If WANTQ is .FALSE., Q is not referenced.
*
*  LDQ     (input) INTEGER
*          The leading dimension of the array Q.
*          LDQ >= 1; and if WANTQ is .TRUE., LDQ >= N.
*
*  J1      (input) INTEGER
*          The index of the first row of the first block T11.
*
*  N1      (input) INTEGER
*          The order of the first block T11. N1 = 0, 1 or 2.
*
*  N2      (input) INTEGER
*          The order of the second block T22. N2 = 0, 1 or 2.
*
*  WORK    (workspace) DOUBLE PRECISION array, dimension (N)
*
*  INFO    (output) INTEGER
*          = 0: successful exit
*          = 1: the transformed matrix T would be too far from Schur
*               form; the blocks are not swapped and T and Q are
*               unchanged.
*
*  =====================================================================
*
*     .. Parameters ..
      DOUBLE PRECISION   ZERO, ONE
      PARAMETER          ( ZERO = 0.0D+0, ONE = 1.0D+0 )
      DOUBLE PRECISION   TEN
      PARAMETER          ( TEN = 1.0D+1 )
      INTEGER            LDD, LDX
      PARAMETER          ( LDD = 4, LDX = 2 )
*     ..
*     .. Local Scalars ..
      INTEGER            IERR, J2, J3, J4, K, ND
      DOUBLE PRECISION   CS, DNORM, EPS, SCALE, SMLNUM, SN, T11, T22,
     $                   T33, TAU, TAU1, TAU2, TEMP, THRESH, WI1, WI2,
     $                   WR1, WR2, XNORM
*     ..
*     .. Local Arrays ..
      DOUBLE PRECISION   D( LDD, 4 ), U( 3 ), U1( 3 ), U2( 3 ),
     $                   X( LDX, 2 )
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLAMCH, DLANGE
      EXTERNAL           DLAMCH, DLANGE
*     ..
*     .. External Subroutines ..
      EXTERNAL           DLACPY, DLANV2, DLARFG, DLARFX, DLARTG, DLASY2,
     $                   DROT
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          ABS, MAX
*     ..
*     .. Executable Statements ..
*
      INFO = 0
*
*     Quick return if possible
*
      IF( N.EQ.0 .OR. N1.EQ.0 .OR. N2.EQ.0 )
     $   RETURN
      IF( J1+N1.GT.N )
     $   RETURN
*
      J2 = J1 + 1
      J3 = J1 + 2
      J4 = J1 + 3
*
      IF( N1.EQ.1 .AND. N2.EQ.1 ) THEN
*
*        Swap two 1-by-1 blocks.
*
         T11 = T( J1, J1 )
         T22 = T( J2, J2 )
*
*        Determine the transformation to perform the interchange.
*
         CALL DLARTG( T( J1, J2 ), T22-T11, CS, SN, TEMP )
*
*        Apply transformation to the matrix T.
*
         IF( J3.LE.N )
     $      CALL DROT( N-J1-1, T( J1, J3 ), LDT, T( J2, J3 ), LDT, CS,
     $                 SN )
         CALL DROT( J1-1, T( 1, J1 ), 1, T( 1, J2 ), 1, CS, SN )
*
         T( J1, J1 ) = T22
         T( J2, J2 ) = T11
*
         IF( WANTQ ) THEN
*
*           Accumulate transformation in the matrix Q.
*
            CALL DROT( N, Q( 1, J1 ), 1, Q( 1, J2 ), 1, CS, SN )
         END IF
*
      ELSE
*
*        Swapping involves at least one 2-by-2 block.
*
*        Copy the diagonal block of order N1+N2 to the local array D
*        and compute its norm.
*
         ND = N1 + N2
         CALL DLACPY( 'Full', ND, ND, T( J1, J1 ), LDT, D, LDD )
         DNORM = DLANGE( 'Max', ND, ND, D, LDD, WORK )
*
*        Compute machine-dependent threshold for test for accepting
*        swap.
*
         EPS = DLAMCH( 'P' )
         SMLNUM = DLAMCH( 'S' ) / EPS
         THRESH = MAX( TEN*EPS*DNORM, SMLNUM )
*
*        Solve T11*X - X*T22 = scale*T12 for X.
*
         CALL DLASY2( .FALSE., .FALSE., -1, N1, N2, D, LDD,
     $                D( N1+1, N1+1 ), LDD, D( 1, N1+1 ), LDD, SCALE, X,
     $                LDX, XNORM, IERR )
*
*        Swap the adjacent diagonal blocks.
*
         K = N1 + N1 + N2 - 3
         GO TO ( 10, 20, 30 )K
*
   10    CONTINUE
*
*        N1 = 1, N2 = 2: generate elementary reflector H so that:
*
*        ( scale, X11, X12 ) H = ( 0, 0, * )
*
         U( 1 ) = SCALE
         U( 2 ) = X( 1, 1 )
         U( 3 ) = X( 1, 2 )
         CALL DLARFG( 3, U( 3 ), U, 1, TAU )
         U( 3 ) = ONE
         T11 = T( J1, J1 )
*
*        Perform swap provisionally on diagonal block in D.
*
         CALL DLARFX( 'L', 3, 3, U, TAU, D, LDD, WORK )
         CALL DLARFX( 'R', 3, 3, U, TAU, D, LDD, WORK )
*
*        Test whether to reject swap.
*
         IF( MAX( ABS( D( 3, 1 ) ), ABS( D( 3, 2 ) ), ABS( D( 3,
     $       3 )-T11 ) ).GT.THRESH )GO TO 50
*
*        Accept swap: apply transformation to the entire matrix T.
*
         CALL DLARFX( 'L', 3, N-J1+1, U, TAU, T( J1, J1 ), LDT, WORK )
         CALL DLARFX( 'R', J2, 3, U, TAU, T( 1, J1 ), LDT, WORK )
*
         T( J3, J1 ) = ZERO
         T( J3, J2 ) = ZERO
         T( J3, J3 ) = T11
*
         IF( WANTQ ) THEN
*
*           Accumulate transformation in the matrix Q.
*
            CALL DLARFX( 'R', N, 3, U, TAU, Q( 1, J1 ), LDQ, WORK )
         END IF
         GO TO 40
*
   20    CONTINUE
*
*        N1 = 2, N2 = 1: generate elementary reflector H so that:
*
*        H (  -X11 ) = ( * )
*          (  -X21 ) = ( 0 )
*          ( scale ) = ( 0 )
*
         U( 1 ) = -X( 1, 1 )
         U( 2 ) = -X( 2, 1 )
         U( 3 ) = SCALE
         CALL DLARFG( 3, U( 1 ), U( 2 ), 1, TAU )
         U( 1 ) = ONE
         T33 = T( J3, J3 )
*
*        Perform swap provisionally on diagonal block in D.
*
         CALL DLARFX( 'L', 3, 3, U, TAU, D, LDD, WORK )
         CALL DLARFX( 'R', 3, 3, U, TAU, D, LDD, WORK )
*
*        Test whether to reject swap.
*
         IF( MAX( ABS( D( 2, 1 ) ), ABS( D( 3, 1 ) ), ABS( D( 1,
     $       1 )-T33 ) ).GT.THRESH )GO TO 50
*
*        Accept swap: apply transformation to the entire matrix T.
*
         CALL DLARFX( 'R', J3, 3, U, TAU, T( 1, J1 ), LDT, WORK )
         CALL DLARFX( 'L', 3, N-J1, U, TAU, T( J1, J2 ), LDT, WORK )
*
         T( J1, J1 ) = T33
         T( J2, J1 ) = ZERO
         T( J3, J1 ) = ZERO
*
         IF( WANTQ ) THEN
*
*           Accumulate transformation in the matrix Q.
*
            CALL DLARFX( 'R', N, 3, U, TAU, Q( 1, J1 ), LDQ, WORK )
         END IF
         GO TO 40
*
   30    CONTINUE
*
*        N1 = 2, N2 = 2: generate elementary reflectors H(1) and H(2) so
*        that:
*
*        H(2) H(1) (  -X11  -X12 ) = (  *  * )
*                  (  -X21  -X22 )   (  0  * )
*                  ( scale    0  )   (  0  0 )
*                  (    0  scale )   (  0  0 )
*
         U1( 1 ) = -X( 1, 1 )
         U1( 2 ) = -X( 2, 1 )
         U1( 3 ) = SCALE
         CALL DLARFG( 3, U1( 1 ), U1( 2 ), 1, TAU1 )
         U1( 1 ) = ONE
*
         TEMP = -TAU1*( X( 1, 2 )+U1( 2 )*X( 2, 2 ) )
         U2( 1 ) = -TEMP*U1( 2 ) - X( 2, 2 )
         U2( 2 ) = -TEMP*U1( 3 )
         U2( 3 ) = SCALE
         CALL DLARFG( 3, U2( 1 ), U2( 2 ), 1, TAU2 )
         U2( 1 ) = ONE
*
*        Perform swap provisionally on diagonal block in D.
*
         CALL DLARFX( 'L', 3, 4, U1, TAU1, D, LDD, WORK )
         CALL DLARFX( 'R', 4, 3, U1, TAU1, D, LDD, WORK )
         CALL DLARFX( 'L', 3, 4, U2, TAU2, D( 2, 1 ), LDD, WORK )
         CALL DLARFX( 'R', 4, 3, U2, TAU2, D( 1, 2 ), LDD, WORK )
*
*        Test whether to reject swap.
*
         IF( MAX( ABS( D( 3, 1 ) ), ABS( D( 3, 2 ) ), ABS( D( 4, 1 ) ),
     $       ABS( D( 4, 2 ) ) ).GT.THRESH )GO TO 50
*
*        Accept swap: apply transformation to the entire matrix T.
*
         CALL DLARFX( 'L', 3, N-J1+1, U1, TAU1, T( J1, J1 ), LDT, WORK )
         CALL DLARFX( 'R', J4, 3, U1, TAU1, T( 1, J1 ), LDT, WORK )
         CALL DLARFX( 'L', 3, N-J1+1, U2, TAU2, T( J2, J1 ), LDT, WORK )
         CALL DLARFX( 'R', J4, 3, U2, TAU2, T( 1, J2 ), LDT, WORK )
*
         T( J3, J1 ) = ZERO
         T( J3, J2 ) = ZERO
         T( J4, J1 ) = ZERO
         T( J4, J2 ) = ZERO
*
         IF( WANTQ ) THEN
*
*           Accumulate transformation in the matrix Q.
*
            CALL DLARFX( 'R', N, 3, U1, TAU1, Q( 1, J1 ), LDQ, WORK )
            CALL DLARFX( 'R', N, 3, U2, TAU2, Q( 1, J2 ), LDQ, WORK )
         END IF
*
   40    CONTINUE
*
         IF( N2.EQ.2 ) THEN
*
*           Standardize new 2-by-2 block T11
*
            CALL DLANV2( T( J1, J1 ), T( J1, J2 ), T( J2, J1 ),
     $                   T( J2, J2 ), WR1, WI1, WR2, WI2, CS, SN )
            CALL DROT( N-J1-1, T( J1, J1+2 ), LDT, T( J2, J1+2 ), LDT,
     $                 CS, SN )
            CALL DROT( J1-1, T( 1, J1 ), 1, T( 1, J2 ), 1, CS, SN )
            IF( WANTQ )
     $         CALL DROT( N, Q( 1, J1 ), 1, Q( 1, J2 ), 1, CS, SN )
         END IF
*
         IF( N1.EQ.2 ) THEN
*
*           Standardize new 2-by-2 block T22
*
            J3 = J1 + N2
            J4 = J3 + 1
            CALL DLANV2( T( J3, J3 ), T( J3, J4 ), T( J4, J3 ),
     $                   T( J4, J4 ), WR1, WI1, WR2, WI2, CS, SN )
            IF( J3+2.LE.N )
     $         CALL DROT( N-J3-1, T( J3, J3+2 ), LDT, T( J4, J3+2 ),
     $                    LDT, CS, SN )
            CALL DROT( J3-1, T( 1, J3 ), 1, T( 1, J4 ), 1, CS, SN )
            IF( WANTQ )
     $         CALL DROT( N, Q( 1, J3 ), 1, Q( 1, J4 ), 1, CS, SN )
         END IF
*
      END IF
      RETURN
*
*     Exit with INFO = 1 if swap was rejected.
*
   50 CONTINUE
      INFO = 1
      RETURN
*
*     End of DLAEXC
*
      END