SUBROUTINE ZPPSVX( FACT, UPLO, N, NRHS, AP, AFP, EQUED, S, B, LDB, $ X, LDX, RCOND, FERR, BERR, WORK, RWORK, INFO ) * * -- LAPACK driver routine (version 3.1) -- * Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd.. * November 2006 * * .. Scalar Arguments .. CHARACTER EQUED, FACT, UPLO INTEGER INFO, LDB, LDX, N, NRHS DOUBLE PRECISION RCOND * .. * .. Array Arguments .. DOUBLE PRECISION BERR( * ), FERR( * ), RWORK( * ), S( * ) COMPLEX*16 AFP( * ), AP( * ), B( LDB, * ), WORK( * ), $ X( LDX, * ) * .. * * Purpose * ======= * * ZPPSVX uses the Cholesky factorization A = U**H*U or A = L*L**H to * compute the solution to a complex system of linear equations * A * X = B, * where A is an N-by-N Hermitian positive definite matrix stored in * packed format and X and B are N-by-NRHS matrices. * * Error bounds on the solution and a condition estimate are also * provided. * * Description * =========== * * The following steps are performed: * * 1. If FACT = 'E', real scaling factors are computed to equilibrate * the system: * diag(S) * A * diag(S) * inv(diag(S)) * X = diag(S) * B * Whether or not the system will be equilibrated depends on the * scaling of the matrix A, but if equilibration is used, A is * overwritten by diag(S)*A*diag(S) and B by diag(S)*B. * * 2. If FACT = 'N' or 'E', the Cholesky decomposition is used to * factor the matrix A (after equilibration if FACT = 'E') as * A = U'* U , if UPLO = 'U', or * A = L * L', if UPLO = 'L', * where U is an upper triangular matrix, L is a lower triangular * matrix, and ' indicates conjugate transpose. * * 3. If the leading i-by-i principal minor is not positive definite, * then the routine returns with INFO = i. Otherwise, the factored * form of A is used to estimate the condition number of the matrix * A. If the reciprocal of the condition number is less than machine * precision, INFO = N+1 is returned as a warning, but the routine * still goes on to solve for X and compute error bounds as * described below. * * 4. The system of equations is solved for X using the factored form * of A. * * 5. Iterative refinement is applied to improve the computed solution * matrix and calculate error bounds and backward error estimates * for it. * * 6. If equilibration was used, the matrix X is premultiplied by * diag(S) so that it solves the original system before * equilibration. * * Arguments * ========= * * FACT (input) CHARACTER*1 * Specifies whether or not the factored form of the matrix A is * supplied on entry, and if not, whether the matrix A should be * equilibrated before it is factored. * = 'F': On entry, AFP contains the factored form of A. * If EQUED = 'Y', the matrix A has been equilibrated * with scaling factors given by S. AP and AFP will not * be modified. * = 'N': The matrix A will be copied to AFP and factored. * = 'E': The matrix A will be equilibrated if necessary, then * copied to AFP and factored. * * UPLO (input) CHARACTER*1 * = 'U': Upper triangle of A is stored; * = 'L': Lower triangle of A is stored. * * N (input) INTEGER * The number of linear equations, i.e., the order of the * matrix A. N >= 0. * * NRHS (input) INTEGER * The number of right hand sides, i.e., the number of columns * of the matrices B and X. NRHS >= 0. * * AP (input/output) COMPLEX*16 array, dimension (N*(N+1)/2) * On entry, the upper or lower triangle of the Hermitian matrix * A, packed columnwise in a linear array, except if FACT = 'F' * and EQUED = 'Y', then A must contain the equilibrated matrix * diag(S)*A*diag(S). The j-th column of A is stored in the * array AP as follows: * if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j; * if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n. * See below for further details. A is not modified if * FACT = 'F' or 'N', or if FACT = 'E' and EQUED = 'N' on exit. * * On exit, if FACT = 'E' and EQUED = 'Y', A is overwritten by * diag(S)*A*diag(S). * * AFP (input or output) COMPLEX*16 array, dimension (N*(N+1)/2) * If FACT = 'F', then AFP is an input argument and on entry * contains the triangular factor U or L from the Cholesky * factorization A = U**H*U or A = L*L**H, in the same storage * format as A. If EQUED .ne. 'N', then AFP is the factored * form of the equilibrated matrix A. * * If FACT = 'N', then AFP is an output argument and on exit * returns the triangular factor U or L from the Cholesky * factorization A = U**H*U or A = L*L**H of the original * matrix A. * * If FACT = 'E', then AFP is an output argument and on exit * returns the triangular factor U or L from the Cholesky * factorization A = U**H*U or A = L*L**H of the equilibrated * matrix A (see the description of AP for the form of the * equilibrated matrix). * * EQUED (input or output) CHARACTER*1 * Specifies the form of equilibration that was done. * = 'N': No equilibration (always true if FACT = 'N'). * = 'Y': Equilibration was done, i.e., A has been replaced by * diag(S) * A * diag(S). * EQUED is an input argument if FACT = 'F'; otherwise, it is an * output argument. * * S (input or output) DOUBLE PRECISION array, dimension (N) * The scale factors for A; not accessed if EQUED = 'N'. S is * an input argument if FACT = 'F'; otherwise, S is an output * argument. If FACT = 'F' and EQUED = 'Y', each element of S * must be positive. * * B (input/output) COMPLEX*16 array, dimension (LDB,NRHS) * On entry, the N-by-NRHS right hand side matrix B. * On exit, if EQUED = 'N', B is not modified; if EQUED = 'Y', * B is overwritten by diag(S) * B. * * LDB (input) INTEGER * The leading dimension of the array B. LDB >= max(1,N). * * X (output) COMPLEX*16 array, dimension (LDX,NRHS) * If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X to * the original system of equations. Note that if EQUED = 'Y', * A and B are modified on exit, and the solution to the * equilibrated system is inv(diag(S))*X. * * LDX (input) INTEGER * The leading dimension of the array X. LDX >= max(1,N). * * RCOND (output) DOUBLE PRECISION * The estimate of the reciprocal condition number of the matrix * A after equilibration (if done). If RCOND is less than the * machine precision (in particular, if RCOND = 0), the matrix * is singular to working precision. This condition is * indicated by a return code of INFO > 0. * * FERR (output) DOUBLE PRECISION array, dimension (NRHS) * The estimated forward error bound for each solution vector * X(j) (the j-th column of the solution matrix X). * If XTRUE is the true solution corresponding to X(j), FERR(j) * is an estimated upper bound for the magnitude of the largest * element in (X(j) - XTRUE) divided by the magnitude of the * largest element in X(j). The estimate is as reliable as * the estimate for RCOND, and is almost always a slight * overestimate of the true error. * * BERR (output) DOUBLE PRECISION array, dimension (NRHS) * The componentwise relative backward error of each solution * vector X(j) (i.e., the smallest relative change in * any element of A or B that makes X(j) an exact solution). * * WORK (workspace) COMPLEX*16 array, dimension (2*N) * * RWORK (workspace) DOUBLE PRECISION array, dimension (N) * * INFO (output) INTEGER * = 0: successful exit * < 0: if INFO = -i, the i-th argument had an illegal value * > 0: if INFO = i, and i is * <= N: the leading minor of order i of A is * not positive definite, so the factorization * could not be completed, and the solution has not * been computed. RCOND = 0 is returned. * = N+1: U is nonsingular, but RCOND is less than machine * precision, meaning that the matrix is singular * to working precision. Nevertheless, the * solution and error bounds are computed because * there are a number of situations where the * computed solution can be more accurate than the * value of RCOND would suggest. * * Further Details * =============== * * The packed storage scheme is illustrated by the following example * when N = 4, UPLO = 'U': * * Two-dimensional storage of the Hermitian matrix A: * * a11 a12 a13 a14 * a22 a23 a24 * a33 a34 (aij = conjg(aji)) * a44 * * Packed storage of the upper triangle of A: * * AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ] * * ===================================================================== * * .. Parameters .. DOUBLE PRECISION ZERO, ONE PARAMETER ( ZERO = 0.0D+0, ONE = 1.0D+0 ) * .. * .. Local Scalars .. LOGICAL EQUIL, NOFACT, RCEQU INTEGER I, INFEQU, J DOUBLE PRECISION AMAX, ANORM, BIGNUM, SCOND, SMAX, SMIN, SMLNUM * .. * .. External Functions .. LOGICAL LSAME DOUBLE PRECISION DLAMCH, ZLANHP EXTERNAL LSAME, DLAMCH, ZLANHP * .. * .. External Subroutines .. EXTERNAL XERBLA, ZCOPY, ZLACPY, ZLAQHP, ZPPCON, ZPPEQU, $ ZPPRFS, ZPPTRF, ZPPTRS * .. * .. Intrinsic Functions .. INTRINSIC MAX, MIN * .. * .. Executable Statements .. * INFO = 0 NOFACT = LSAME( FACT, 'N' ) EQUIL = LSAME( FACT, 'E' ) IF( NOFACT .OR. EQUIL ) THEN EQUED = 'N' RCEQU = .FALSE. ELSE RCEQU = LSAME( EQUED, 'Y' ) SMLNUM = DLAMCH( 'Safe minimum' ) BIGNUM = ONE / SMLNUM END IF * * Test the input parameters. * IF( .NOT.NOFACT .AND. .NOT.EQUIL .AND. .NOT.LSAME( FACT, 'F' ) ) $ THEN INFO = -1 ELSE IF( .NOT.LSAME( UPLO, 'U' ) .AND. .NOT.LSAME( UPLO, 'L' ) ) $ THEN INFO = -2 ELSE IF( N.LT.0 ) THEN INFO = -3 ELSE IF( NRHS.LT.0 ) THEN INFO = -4 ELSE IF( LSAME( FACT, 'F' ) .AND. .NOT. $ ( RCEQU .OR. LSAME( EQUED, 'N' ) ) ) THEN INFO = -7 ELSE IF( RCEQU ) THEN SMIN = BIGNUM SMAX = ZERO DO 10 J = 1, N SMIN = MIN( SMIN, S( J ) ) SMAX = MAX( SMAX, S( J ) ) 10 CONTINUE IF( SMIN.LE.ZERO ) THEN INFO = -8 ELSE IF( N.GT.0 ) THEN SCOND = MAX( SMIN, SMLNUM ) / MIN( SMAX, BIGNUM ) ELSE SCOND = ONE END IF END IF IF( INFO.EQ.0 ) THEN IF( LDB.LT.MAX( 1, N ) ) THEN INFO = -10 ELSE IF( LDX.LT.MAX( 1, N ) ) THEN INFO = -12 END IF END IF END IF * IF( INFO.NE.0 ) THEN CALL XERBLA( 'ZPPSVX', -INFO ) RETURN END IF * IF( EQUIL ) THEN * * Compute row and column scalings to equilibrate the matrix A. * CALL ZPPEQU( UPLO, N, AP, S, SCOND, AMAX, INFEQU ) IF( INFEQU.EQ.0 ) THEN * * Equilibrate the matrix. * CALL ZLAQHP( UPLO, N, AP, S, SCOND, AMAX, EQUED ) RCEQU = LSAME( EQUED, 'Y' ) END IF END IF * * Scale the right-hand side. * IF( RCEQU ) THEN DO 30 J = 1, NRHS DO 20 I = 1, N B( I, J ) = S( I )*B( I, J ) 20 CONTINUE 30 CONTINUE END IF * IF( NOFACT .OR. EQUIL ) THEN * * Compute the Cholesky factorization A = U'*U or A = L*L'. * CALL ZCOPY( N*( N+1 ) / 2, AP, 1, AFP, 1 ) CALL ZPPTRF( UPLO, N, AFP, INFO ) * * Return if INFO is non-zero. * IF( INFO.GT.0 )THEN RCOND = ZERO RETURN END IF END IF * * Compute the norm of the matrix A. * ANORM = ZLANHP( 'I', UPLO, N, AP, RWORK ) * * Compute the reciprocal of the condition number of A. * CALL ZPPCON( UPLO, N, AFP, ANORM, RCOND, WORK, RWORK, INFO ) * * Compute the solution matrix X. * CALL ZLACPY( 'Full', N, NRHS, B, LDB, X, LDX ) CALL ZPPTRS( UPLO, N, NRHS, AFP, X, LDX, INFO ) * * Use iterative refinement to improve the computed solution and * compute error bounds and backward error estimates for it. * CALL ZPPRFS( UPLO, N, NRHS, AP, AFP, B, LDB, X, LDX, FERR, BERR, $ WORK, RWORK, INFO ) * * Transform the solution matrix X to a solution of the original * system. * IF( RCEQU ) THEN DO 50 J = 1, NRHS DO 40 I = 1, N X( I, J ) = S( I )*X( I, J ) 40 CONTINUE 50 CONTINUE DO 60 J = 1, NRHS FERR( J ) = FERR( J ) / SCOND 60 CONTINUE END IF * * Set INFO = N+1 if the matrix is singular to working precision. * IF( RCOND.LT.DLAMCH( 'Epsilon' ) ) $ INFO = N + 1 * RETURN * * End of ZPPSVX * END