SUBROUTINE PDLARF( SIDE, M, N, V, IV, JV, DESCV, INCV, TAU,
$ C, IC, JC, DESCC, WORK )
*
* -- ScaLAPACK auxiliary routine (version 1.5) --
* University of Tennessee, Knoxville, Oak Ridge National Laboratory,
* and University of California, Berkeley.
* May 1, 1997
*
* .. Scalar Arguments ..
CHARACTER SIDE
INTEGER IC, INCV, IV, JC, JV, M, N
* ..
* .. Array Arguments ..
INTEGER DESCC( * ), DESCV( * )
DOUBLE PRECISION C( * ), TAU( * ), V( * ), WORK( * )
* ..
*
* Purpose
* =======
*
* PDLARF applies a real elementary reflector Q (or Q**T) to a real
* M-by-N distributed matrix sub( C ) = C(IC:IC+M-1,JC:JC+N-1), from
* either the left or the right. Q is represented in the form
*
* Q = I - tau * v * v'
*
* where tau is a real scalar and v is a real vector.
*
* If tau = 0, then Q is taken to be the unit matrix.
*
* Notes
* =====
*
* Each global data object is described by an associated description
* vector. This vector stores the information required to establish
* the mapping between an object element and its corresponding process
* and memory location.
*
* Let A be a generic term for any 2D block cyclicly distributed array.
* Such a global array has an associated description vector DESCA.
* In the following comments, the character _ should be read as
* "of the global array".
*
* NOTATION STORED IN EXPLANATION
* --------------- -------------- --------------------------------------
* DTYPE_A(global) DESCA( DTYPE_ )The descriptor type. In this case,
* DTYPE_A = 1.
* CTXT_A (global) DESCA( CTXT_ ) The BLACS context handle, indicating
* the BLACS process grid A is distribu-
* ted over. The context itself is glo-
* bal, but the handle (the integer
* value) may vary.
* M_A (global) DESCA( M_ ) The number of rows in the global
* array A.
* N_A (global) DESCA( N_ ) The number of columns in the global
* array A.
* MB_A (global) DESCA( MB_ ) The blocking factor used to distribute
* the rows of the array.
* NB_A (global) DESCA( NB_ ) The blocking factor used to distribute
* the columns of the array.
* RSRC_A (global) DESCA( RSRC_ ) The process row over which the first
* row of the array A is distributed.
* CSRC_A (global) DESCA( CSRC_ ) The process column over which the
* first column of the array A is
* distributed.
* LLD_A (local) DESCA( LLD_ ) The leading dimension of the local
* array. LLD_A >= MAX(1,LOCr(M_A)).
*
* Let K be the number of rows or columns of a distributed matrix,
* and assume that its process grid has dimension p x q.
* LOCr( K ) denotes the number of elements of K that a process
* would receive if K were distributed over the p processes of its
* process column.
* Similarly, LOCc( K ) denotes the number of elements of K that a
* process would receive if K were distributed over the q processes of
* its process row.
* The values of LOCr() and LOCc() may be determined via a call to the
* ScaLAPACK tool function, NUMROC:
* LOCr( M ) = NUMROC( M, MB_A, MYROW, RSRC_A, NPROW ),
* LOCc( N ) = NUMROC( N, NB_A, MYCOL, CSRC_A, NPCOL ).
* An upper bound for these quantities may be computed by:
* LOCr( M ) <= ceil( ceil(M/MB_A)/NPROW )*MB_A
* LOCc( N ) <= ceil( ceil(N/NB_A)/NPCOL )*NB_A
*
* Because vectors may be viewed as a subclass of matrices, a
* distributed vector is considered to be a distributed matrix.
*
* Restrictions
* ============
*
* If SIDE = 'Left' and INCV = 1, then the row process having the first
* entry V(IV,JV) must also have the first row of sub( C ). Moreover,
* MOD(IV-1,MB_V) must be equal to MOD(IC-1,MB_C), if INCV=M_V, only
* the last equality must be satisfied.
*
* If SIDE = 'Right' and INCV = M_V then the column process having the
* first entry V(IV,JV) must also have the first column of sub( C ) and
* MOD(JV-1,NB_V) must be equal to MOD(JC-1,NB_C), if INCV = 1 only the
* last equality must be satisfied.
*
* Arguments
* =========
*
* SIDE (global input) CHARACTER
* = 'L': form Q * sub( C ),
* = 'R': form sub( C ) * Q, Q = Q**T.
*
* M (global input) INTEGER
* The number of rows to be operated on i.e the number of rows
* of the distributed submatrix sub( C ). M >= 0.
*
* N (global input) INTEGER
* The number of columns to be operated on i.e the number of
* columns of the distributed submatrix sub( C ). N >= 0.
*
* V (local input) DOUBLE PRECISION pointer into the local memory
* to an array of dimension (LLD_V,*) containing the local
* pieces of the distributed vectors V representing the
* Householder transformation Q,
* V(IV:IV+M-1,JV) if SIDE = 'L' and INCV = 1,
* V(IV,JV:JV+M-1) if SIDE = 'L' and INCV = M_V,
* V(IV:IV+N-1,JV) if SIDE = 'R' and INCV = 1,
* V(IV,JV:JV+N-1) if SIDE = 'R' and INCV = M_V,
*
* The vector v in the representation of Q. V is not used if
* TAU = 0.
*
* IV (global input) INTEGER
* The row index in the global array V indicating the first
* row of sub( V ).
*
* JV (global input) INTEGER
* The column index in the global array V indicating the
* first column of sub( V ).
*
* DESCV (global and local input) INTEGER array of dimension DLEN_.
* The array descriptor for the distributed matrix V.
*
* INCV (global input) INTEGER
* The global increment for the elements of V. Only two values
* of INCV are supported in this version, namely 1 and M_V.
* INCV must not be zero.
*
* TAU (local input) DOUBLE PRECISION, array, dimension LOCc(JV) if
* INCV = 1, and LOCr(IV) otherwise. This array contains the
* Householder scalars related to the Householder vectors.
* TAU is tied to the distributed matrix V.
*
* C (local input/local output) DOUBLE PRECISION pointer into the
* local memory to an array of dimension (LLD_C, LOCc(JC+N-1) ),
* containing the local pieces of sub( C ). On exit, sub( C )
* is overwritten by the Q * sub( C ) if SIDE = 'L', or
* sub( C ) * Q if SIDE = 'R'.
*
* IC (global input) INTEGER
* The row index in the global array C indicating the first
* row of sub( C ).
*
* JC (global input) INTEGER
* The column index in the global array C indicating the
* first column of sub( C ).
*
* DESCC (global and local input) INTEGER array of dimension DLEN_.
* The array descriptor for the distributed matrix C.
*
* WORK (local workspace) DOUBLE PRECISION array, dimension (LWORK)
* If INCV = 1,
* if SIDE = 'L',
* if IVCOL = ICCOL,
* LWORK >= NqC0
* else
* LWORK >= MpC0 + MAX( 1, NqC0 )
* end if
* else if SIDE = 'R',
* LWORK >= NqC0 + MAX( MAX( 1, MpC0 ), NUMROC( NUMROC(
* N+ICOFFC,NB_V,0,0,NPCOL ),NB_V,0,0,LCMQ ) )
* end if
* else if INCV = M_V,
* if SIDE = 'L',
* LWORK >= MpC0 + MAX( MAX( 1, NqC0 ), NUMROC( NUMROC(
* M+IROFFC,MB_V,0,0,NPROW ),MB_V,0,0,LCMP ) )
* else if SIDE = 'R',
* if IVROW = ICROW,
* LWORK >= MpC0
* else
* LWORK >= NqC0 + MAX( 1, MpC0 )
* end if
* end if
* end if
*
* where LCM is the least common multiple of NPROW and NPCOL and
* LCM = ILCM( NPROW, NPCOL ), LCMP = LCM / NPROW,
* LCMQ = LCM / NPCOL,
*
* IROFFC = MOD( IC-1, MB_C ), ICOFFC = MOD( JC-1, NB_C ),
* ICROW = INDXG2P( IC, MB_C, MYROW, RSRC_C, NPROW ),
* ICCOL = INDXG2P( JC, NB_C, MYCOL, CSRC_C, NPCOL ),
* MpC0 = NUMROC( M+IROFFC, MB_C, MYROW, ICROW, NPROW ),
* NqC0 = NUMROC( N+ICOFFC, NB_C, MYCOL, ICCOL, NPCOL ),
*
* ILCM, INDXG2P and NUMROC are ScaLAPACK tool functions;
* MYROW, MYCOL, NPROW and NPCOL can be determined by calling
* the subroutine BLACS_GRIDINFO.
*
* Alignment requirements
* ======================
*
* The distributed submatrices V(IV:*, JV:*) and C(IC:IC+M-1,JC:JC+N-1)
* must verify some alignment properties, namely the following
* expressions should be true:
*
* MB_V = NB_V,
*
* If INCV = 1,
* If SIDE = 'Left',
* ( MB_V.EQ.MB_C .AND. IROFFV.EQ.IROFFC .AND. IVROW.EQ.ICROW )
* If SIDE = 'Right',
* ( MB_V.EQ.NB_A .AND. MB_V.EQ.NB_C .AND. IROFFV.EQ.ICOFFC )
* else if INCV = M_V,
* If SIDE = 'Left',
* ( MB_V.EQ.NB_V .AND. MB_V.EQ.MB_C .AND. ICOFFV.EQ.IROFFC )
* If SIDE = 'Right',
* ( NB_V.EQ.NB_C .AND. ICOFFV.EQ.ICOFFC .AND. IVCOL.EQ.ICCOL )
* end if
*
* =====================================================================
*
* .. Parameters ..
INTEGER BLOCK_CYCLIC_2D, CSRC_, CTXT_, DLEN_, DTYPE_,
$ LLD_, MB_, M_, NB_, N_, RSRC_
PARAMETER ( BLOCK_CYCLIC_2D = 1, DLEN_ = 9, DTYPE_ = 1,
$ CTXT_ = 2, M_ = 3, N_ = 4, MB_ = 5, NB_ = 6,
$ RSRC_ = 7, CSRC_ = 8, LLD_ = 9 )
DOUBLE PRECISION ONE, ZERO
PARAMETER ( ONE = 1.0D+0, ZERO = 0.0D+0 )
* ..
* .. Local Scalars ..
LOGICAL CCBLCK, CRBLCK
CHARACTER COLBTOP, ROWBTOP
INTEGER ICCOL, ICOFF, ICROW, ICTXT, IIC, IIV, IOFFC,
$ IOFFV, IPW, IROFF, IVCOL, IVROW, JJC, JJV, LDC,
$ LDV, MYCOL, MYROW, MP, NCC, NCV, NPCOL, NPROW,
$ NQ, RDEST
DOUBLE PRECISION TAULOC
* ..
* .. External Subroutines ..
EXTERNAL BLACS_GRIDINFO, DCOPY, DGEBR2D, DGEBS2D,
$ DGEMV, DGER, DGERV2D, DGESD2D,
$ DGSUM2D, DLASET, INFOG2L, PTOPGET,
$ PBDTRNV
* ..
* .. External Functions ..
LOGICAL LSAME
INTEGER NUMROC
EXTERNAL LSAME, NUMROC
* ..
* .. Intrinsic Functions ..
INTRINSIC MIN, MOD
* ..
* .. Executable Statements ..
*
* Quick return if possible
*
IF( M.LE.0 .OR. N.LE.0 )
$ RETURN
*
* Get grid parameters.
*
ICTXT = DESCC( CTXT_ )
CALL BLACS_GRIDINFO( ICTXT, NPROW, NPCOL, MYROW, MYCOL )
*
* Figure local indexes
*
CALL INFOG2L( IC, JC, DESCC, NPROW, NPCOL, MYROW, MYCOL, IIC, JJC,
$ ICROW, ICCOL )
CALL INFOG2L( IV, JV, DESCV, NPROW, NPCOL, MYROW, MYCOL, IIV, JJV,
$ IVROW, IVCOL )
NCC = NUMROC( DESCC( N_ ), DESCC( NB_ ), MYCOL, DESCC( CSRC_ ),
$ NPCOL )
NCV = NUMROC( DESCV( N_ ), DESCV( NB_ ), MYCOL, DESCV( CSRC_ ),
$ NPCOL )
LDC = DESCC( LLD_ )
LDV = DESCV( LLD_ )
IIC = MIN( IIC, LDC )
IIV = MIN( IIV, LDV )
JJC = MIN( JJC, NCC )
JJV = MIN( JJV, NCV )
IOFFC = IIC+(JJC-1)*LDC
IOFFV = IIV+(JJV-1)*LDV
*
IROFF = MOD( IC-1, DESCC( MB_ ) )
ICOFF = MOD( JC-1, DESCC( NB_ ) )
MP = NUMROC( M+IROFF, DESCC( MB_ ), MYROW, ICROW, NPROW )
NQ = NUMROC( N+ICOFF, DESCC( NB_ ), MYCOL, ICCOL, NPCOL )
IF( MYROW.EQ.ICROW )
$ MP = MP - IROFF
IF( MYCOL.EQ.ICCOL )
$ NQ = NQ - ICOFF
*
* Is sub( C ) only distributed over a process row ?
*
CRBLCK = ( M.LE.(DESCC( MB_ )-IROFF) )
*
* Is sub( C ) only distributed over a process column ?
*
CCBLCK = ( N.LE.(DESCC( NB_ )-ICOFF) )
*
IF( LSAME( SIDE, 'L' ) ) THEN
*
IF( CRBLCK ) THEN
RDEST = ICROW
ELSE
RDEST = -1
END IF
*
IF( CCBLCK ) THEN
*
* sub( C ) is distributed over a process column
*
IF( DESCV( M_ ).EQ.INCV ) THEN
*
* Transpose row vector V
*
IPW = MP+1
CALL PBDTRNV( ICTXT, 'Rowwise', 'Transpose', M,
$ DESCV( NB_ ), IROFF, V( IOFFV ), LDV, ZERO,
$ WORK, 1, IVROW, IVCOL, ICROW, ICCOL,
$ WORK( IPW ) )
*
* Perform the local computation within a process column
*
IF( MYCOL.EQ.ICCOL ) THEN
*
IF( MYROW.EQ.IVROW ) THEN
*
CALL DGEBS2D( ICTXT, 'Columnwise', ' ', 1, 1,
$ TAU( IIV ), 1 )
TAULOC = TAU( IIV )
*
ELSE
*
CALL DGEBR2D( ICTXT, 'Columnwise', ' ', 1, 1,
$ TAULOC, 1, IVROW, MYCOL )
*
END IF
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C )' * v
*
IF( MP.GT.0 ) THEN
CALL DGEMV( 'Transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, WORK, 1, ZERO,
$ WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', NQ, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, NQ ) )
END IF
CALL DGSUM2D( ICTXT, 'Columnwise', ' ', NQ, 1,
$ WORK( IPW ), MAX( 1, NQ ), RDEST,
$ MYCOL )
*
* sub( C ) := sub( C ) - v * w'
*
CALL DGER( MP, NQ, -TAULOC, WORK, 1, WORK( IPW ),
$ 1, C( IOFFC ), LDC )
END IF
*
END IF
*
ELSE
*
* V is a column vector
*
IF( IVCOL.EQ.ICCOL ) THEN
*
* Perform the local computation within a process column
*
IF( MYCOL.EQ.ICCOL ) THEN
*
TAULOC = TAU( JJV )
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C )' * v
*
IF( MP.GT.0 ) THEN
CALL DGEMV( 'Transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, V( IOFFV ), 1,
$ ZERO, WORK, 1 )
ELSE
CALL DLASET( 'All', NQ, 1, ZERO, ZERO,
$ WORK, MAX( 1, NQ ) )
END IF
CALL DGSUM2D( ICTXT, 'Columnwise', ' ', NQ, 1,
$ WORK, MAX( 1, NQ ), RDEST, MYCOL )
*
* sub( C ) := sub( C ) - v * w'
*
CALL DGER( MP, NQ, -TAULOC, V( IOFFV ), 1, WORK,
$ 1, C( IOFFC ), LDC )
END IF
*
END IF
*
ELSE
*
* Send V and TAU to the process column ICCOL
*
IF( MYCOL.EQ.IVCOL ) THEN
*
IPW = MP+1
CALL DCOPY( MP, V( IOFFV ), 1, WORK, 1 )
WORK( IPW ) = TAU( JJV )
CALL DGESD2D( ICTXT, IPW, 1, WORK, IPW, MYROW,
$ ICCOL )
*
ELSE IF( MYCOL.EQ.ICCOL ) THEN
*
IPW = MP+1
CALL DGERV2D( ICTXT, IPW, 1, WORK, IPW, MYROW,
$ IVCOL )
TAULOC = WORK( IPW )
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C )' * v
*
IF( MP.GT.0 ) THEN
CALL DGEMV( 'Transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, WORK, 1, ZERO,
$ WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', NQ, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, NQ ) )
END IF
CALL DGSUM2D( ICTXT, 'Columnwise', ' ', NQ, 1,
$ WORK( IPW ), MAX( 1, NQ ), RDEST,
$ MYCOL )
*
* sub( C ) := sub( C ) - v * w'
*
CALL DGER( MP, NQ, -TAULOC, WORK, 1,
$ WORK( IPW ), 1, C( IOFFC ), LDC )
END IF
*
END IF
*
END IF
*
END IF
*
ELSE
*
* sub( C ) is a proper distributed matrix
*
IF( DESCV( M_ ).EQ.INCV ) THEN
*
* Transpose and broadcast row vector V
*
IPW = MP+1
CALL PBDTRNV( ICTXT, 'Rowwise', 'Transpose', M,
$ DESCV( NB_ ), IROFF, V( IOFFV ), LDV, ZERO,
$ WORK, 1, IVROW, IVCOL, ICROW, -1,
$ WORK( IPW ) )
*
* Perform the local computation within a process column
*
IF( MYROW.EQ.IVROW ) THEN
*
CALL DGEBS2D( ICTXT, 'Columnwise', ' ', 1, 1,
$ TAU( IIV ), 1 )
TAULOC = TAU( IIV )
*
ELSE
*
CALL DGEBR2D( ICTXT, 'Columnwise', ' ', 1, 1, TAULOC,
$ 1, IVROW, MYCOL )
*
END IF
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C )' * v
*
IF( MP.GT.0 ) THEN
CALL DGEMV( 'Transpose', MP, NQ, ONE, C( IOFFC ),
$ LDC, WORK, 1, ZERO, WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', NQ, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, NQ ) )
END IF
CALL DGSUM2D( ICTXT, 'Columnwise', ' ', NQ, 1,
$ WORK( IPW ), MAX( 1, NQ ), RDEST,
$ MYCOL )
*
* sub( C ) := sub( C ) - v * w'
*
CALL DGER( MP, NQ, -TAULOC, WORK, 1, WORK( IPW ), 1,
$ C( IOFFC ), LDC )
END IF
*
ELSE
*
* Broadcast column vector V
*
CALL PTOPGET( ICTXT, 'Broadcast', 'Rowwise', ROWBTOP )
IF( MYCOL.EQ.IVCOL ) THEN
*
IPW = MP+1
CALL DCOPY( MP, V( IOFFV ), 1, WORK, 1 )
WORK(IPW) = TAU( JJV )
CALL DGEBS2D( ICTXT, 'Rowwise', ROWBTOP, IPW, 1,
$ WORK, IPW )
TAULOC = TAU( JJV )
*
ELSE
*
IPW = MP+1
CALL DGEBR2D( ICTXT, 'Rowwise', ROWBTOP, IPW, 1, WORK,
$ IPW, MYROW, IVCOL )
TAULOC = WORK( IPW )
*
END IF
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C )' * v
*
IF( MP.GT.0 ) THEN
CALL DGEMV( 'Transpose', MP, NQ, ONE, C( IOFFC ),
$ LDC, WORK, 1, ZERO, WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', NQ, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, NQ ) )
END IF
CALL DGSUM2D( ICTXT, 'Columnwise', ' ', NQ, 1,
$ WORK( IPW ), MAX( 1, NQ ), RDEST,
$ MYCOL )
*
* sub( C ) := sub( C ) - v * w'
*
CALL DGER( MP, NQ, -TAULOC, WORK, 1, WORK( IPW ), 1,
$ C( IOFFC ), LDC )
END IF
*
END IF
*
END IF
*
ELSE
*
IF( CCBLCK ) THEN
RDEST = MYROW
ELSE
RDEST = -1
END IF
*
IF( CRBLCK ) THEN
*
* sub( C ) is distributed over a process row
*
IF( DESCV( M_ ).EQ.INCV ) THEN
*
* V is a row vector
*
IF( IVROW.EQ.ICROW ) THEN
*
* Perform the local computation within a process row
*
IF( MYROW.EQ.ICROW ) THEN
*
TAULOC = TAU( IIV )
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C ) * v
*
IF( NQ.GT.0 ) THEN
CALL DGEMV( 'No transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, V( IOFFV ), LDV,
$ ZERO, WORK, 1 )
ELSE
CALL DLASET( 'All', MP, 1, ZERO, ZERO,
$ WORK, MAX( 1, MP ) )
END IF
CALL DGSUM2D( ICTXT, 'Rowwise', ' ', MP, 1,
$ WORK, MAX( 1, MP ), RDEST, ICCOL )
*
* sub( C ) := sub( C ) - w * v'
*
CALL DGER( MP, NQ, -TAULOC, WORK, 1, V( IOFFV ),
$ LDV, C( IOFFC ), LDC )
END IF
*
END IF
*
ELSE
*
* Send V and TAU to the process row ICROW
*
IF( MYROW.EQ.IVROW ) THEN
*
IPW = NQ+1
CALL DCOPY( NQ, V( IOFFV ), LDV, WORK, 1 )
WORK(IPW) = TAU( IIV )
CALL DGESD2D( ICTXT, IPW, 1, WORK, IPW, ICROW,
$ MYCOL )
*
ELSE IF( MYROW.EQ.ICROW ) THEN
*
IPW = NQ+1
CALL DGERV2D( ICTXT, IPW, 1, WORK, IPW, IVROW,
$ MYCOL )
TAULOC = WORK( IPW )
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C ) * v
*
IF( NQ.GT.0 ) THEN
CALL DGEMV( 'No transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, WORK, 1, ZERO,
$ WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', MP, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, MP ) )
END IF
CALL DGSUM2D( ICTXT, 'Rowwise', ' ', MP, 1,
$ WORK( IPW ), MAX( 1, MP ), RDEST,
$ ICCOL )
*
* sub( C ) := sub( C ) - w * v'
*
CALL DGER( MP, NQ, -TAULOC, WORK( IPW ), 1,
$ WORK, 1, C( IOFFC ), LDC )
END IF
*
END IF
*
END IF
*
ELSE
*
* Transpose column vector V
*
IPW = NQ+1
CALL PBDTRNV( ICTXT, 'Columnwise', 'Transpose', N,
$ DESCV( MB_ ), ICOFF, V( IOFFV ), 1, ZERO,
$ WORK, 1, IVROW, IVCOL, ICROW, ICCOL,
$ WORK( IPW ) )
*
* Perform the local computation within a process column
*
IF( MYROW.EQ.ICROW ) THEN
*
IF( MYCOL.EQ.IVCOL ) THEN
*
CALL DGEBS2D( ICTXT, 'Rowwise', ' ', 1, 1,
$ TAU( JJV ), 1 )
TAULOC = TAU( JJV )
*
ELSE
*
CALL DGEBR2D( ICTXT, 'Rowwise', ' ', 1, 1, TAULOC,
$ 1, MYROW, IVCOL )
*
END IF
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C ) * v
*
IF( NQ.GT.0 ) THEN
CALL DGEMV( 'No transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, WORK, 1, ZERO,
$ WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', MP, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, MP ) )
END IF
CALL DGSUM2D( ICTXT, 'Rowwise', ' ', MP, 1,
$ WORK( IPW ), MAX( 1, MP ), RDEST,
$ ICCOL )
*
* sub( C ) := sub( C ) - w * v'
*
CALL DGER( MP, NQ, -TAULOC, WORK( IPW ), 1, WORK,
$ 1, C( IOFFC ), LDC )
END IF
*
END IF
*
END IF
*
ELSE
*
* sub( C ) is a proper distributed matrix
*
IF( DESCV( M_ ).EQ.INCV ) THEN
*
* Broadcast row vector V
*
CALL PTOPGET( ICTXT, 'Broadcast', 'Columnwise', COLBTOP )
IF( MYROW.EQ.IVROW ) THEN
*
IPW = NQ+1
CALL DCOPY( NQ, V( IOFFV ), LDV, WORK, 1 )
WORK(IPW) = TAU( IIV )
CALL DGEBS2D( ICTXT, 'Columnwise', COLBTOP, IPW, 1,
$ WORK, IPW )
TAULOC = TAU( IIV )
*
ELSE
*
IPW = NQ+1
CALL DGEBR2D( ICTXT, 'Columnwise', COLBTOP, IPW, 1,
$ WORK, IPW, IVROW, MYCOL )
TAULOC = WORK( IPW )
*
END IF
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C ) * v
*
IF( NQ.GT.0 ) THEN
CALL DGEMV( 'No Transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, WORK, 1, ZERO,
$ WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', MP, 1, ZERO, ZERO,
$ WORK( IPW ), MAX( 1, MP ) )
END IF
CALL DGSUM2D( ICTXT, 'Rowwise', ' ', MP, 1,
$ WORK( IPW ), MAX( 1, MP ), RDEST,
$ ICCOL )
*
* sub( C ) := sub( C ) - w * v'
*
CALL DGER( MP, NQ, -TAULOC, WORK( IPW ), 1, WORK, 1,
$ C( IOFFC ), LDC )
END IF
*
ELSE
*
* Transpose and broadcast column vector V
*
IPW = NQ+1
CALL PBDTRNV( ICTXT, 'Columnwise', 'Transpose', N,
$ DESCV( MB_ ), ICOFF, V( IOFFV ), 1, ZERO,
$ WORK, 1, IVROW, IVCOL, -1, ICCOL,
$ WORK( IPW ) )
*
* Perform the local computation within a process column
*
IF( MYCOL.EQ.IVCOL ) THEN
*
CALL DGEBS2D( ICTXT, 'Rowwise', ' ', 1, 1, TAU( JJV ),
$ 1 )
TAULOC = TAU( JJV )
*
ELSE
*
CALL DGEBR2D( ICTXT, 'Rowwise', ' ', 1, 1, TAULOC, 1,
$ MYROW, IVCOL )
*
END IF
*
IF( TAULOC.NE.ZERO ) THEN
*
* w := sub( C ) * v
*
IF( NQ.GT.0 ) THEN
CALL DGEMV( 'No transpose', MP, NQ, ONE,
$ C( IOFFC ), LDC, WORK, 1, ZERO,
$ WORK( IPW ), 1 )
ELSE
CALL DLASET( 'All', MP, 1, ZERO, ZERO, WORK( IPW ),
$ MAX( 1, MP ) )
END IF
CALL DGSUM2D( ICTXT, 'Rowwise', ' ', MP, 1,
$ WORK( IPW ), MAX( 1, MP ), RDEST,
$ ICCOL )
*
* sub( C ) := sub( C ) - w * v'
*
CALL DGER( MP, NQ, -TAULOC, WORK( IPW ), 1, WORK, 1,
$ C( IOFFC ), LDC )
END IF
*
END IF
*
END IF
*
END IF
*
RETURN
*
* End of PDLARF
*
END