SPEC SFS 1 Baseline Summary

097.LADDIS (Volume 5, Issue 4, December 1993)


Auspex Systems, Inc.

NS 6000 NetServer / 4 Ethernets

Throughput:

       NFS         Average       
       Throughput  NFS           
       SPECnfs_A93 Response Time 
       Ops/Sec     Milliseconds  
       ----------- ------------- 
       80          10.4          
       159         11.3          
       238         12.6          
       315         14.7          
       400         16.3          
       483         18.3          
       559         19.4          
       634         21.6          
       725         24.0          
       806         26.8          
       880         29.9          
       968         33.9          
       1048        36.8          
       1065        38.0          
       1088        40.4          
       1102        42.2          
       1108        43.0          
       
SPEC SFS 1 Baseline Result:
   1108 SPECnfs_A93 Ops/Sec @ 43 msec ==> 111 SPECnfs_A93 Users

Server Hardware
CPU, Memory, & Power
Model Number: NS 6000
CPU per Host: M68EC030, 40 MHz, 512KB
# of Host: 2
Primary Cache: 16MB per File Processor
Secondary Cache: 2 1-MB nonvolatile Write Accel.
Other Cache: n/a for NFS
Memory per Host: 192MB
UPS: None
Other Hardware: None
Server Software
OS Version: Auspex release 1.5.2 Alpha
Other Software: None
File System: Auspex LFS (BSD FFS)

Load Generators(LGs)
Number of Load Generators: 8
Processes Per Load Generator: 5
Biod_Max_Reads: 2
Biod_Max_Writes: 2

Disk Subsystem & Filesystems (Full Configuration Follows)
Num Disk Controllers: 2 Storage Processors
Num Disks: 30
Num File Systems: 15 (F1 thru F15)

Network Subsystem (Full Configuration Follows)
Num Net Controllers: 2 File Processors
Num Networks: 4 (N1 thru N4)
Type Network: Ethernet

Server Tuning (Also see Notes/Tuning below)
Buffer Cache Size: 192MB
Num NFS Daemons: 64
Fileset Size: 6.88GB

Hardware Availability: Dec-93
Software Availability: Dec-93

License #: 29
Tested : Aug-93
By: Auspex Systems
Of: Santa Clara, CA

Notes/Summary Of Tuning Parameters
Note: Storage Processors are referenced as SP0, SP1; File Processors as FP0, FP1; Ethernet Processors as EP0, EP1.
All Load Generators used same LADDIS Mount Points list with same /etc/fstab entries.
The LADDIS Prime Client was the server Host Processor (no router was needed). ThinNet Ethernet cables/transceivers were used.
The adb tool was used to enable UDP checksumming on the IPX load generators.
adb -w /vmunix/dev/kmem
udp_cksum?W1
udp-cksum/W1

Detailed Server Description
Network Subsystem
Ethernet Processor model: EP-III
EP-III description: M68EC030, 40 MHz, 512-KB local memory
Number of EP=III processors: 2
Number of Ethernets: 4 (2 interfaces per EP-III)

Disk Subsystem & Filesystems
Storage Processor Model: SP-III
SP-III Description: M68EC020, 20 MHz, 256-KB local memory
Number of SP-III Processors: 2
Number of Parallel SCSI channels per SP-III: 10
Number of disks used by LADDIS per SP-III: 20 on SP0
and 10 on SP1 (30 total)
SP0 supported root disk (Model 3005) for root, swap, tmp on partition
a of disk ad0
Types of disks: Model 3005R (2.0GB formatted)
Filesystems per SP-III: 10 VPs (virtual partitions)-2 disks each
VP description: striped (unit=128KB) on 2 disks preformatted a
partitions (except for File 10 which uses e)
Each Storage Processor has a 1-MB nonvolatile Write Accelerator

Detailed Load Generator (LG) Description
       Load Generator Type: LG1                  
       Model:               Sun SPARCstation IPX 
       # of CPUs:           1                    
       Main Mem             16MB                 
       OS:                  SunOS 4.1.3          
       Compiler:            /bin/cc              
       
       Load Generator Type: LG2         
       Model:               HP 735      
       # of CPUs:           1           
       Main Mem             16MB        
       OS:                  HP-UX 9.0.1 
       Compiler:            /bin/cc     
       

Testbed Configuration
       Load Generator Load Generator         Target      Filesystem    
       Number         Type           Network Filesystems Mount Options 
       -------------- -------------- ------- ----------- ------------- 
       1              LG1            N1      F1-5        Default       
       2              LG1            N1      F6-10       Default       
       3              LG1            N2      F6-10       Default       
       4              LG1            N2      F11-15      Default       
       5              LG1            N3      F11-15      Default       
       6              LG1            N3      F1-5        Default       
       7              LG2            N4      F1-5        Default       
       8              LG2            N4      F6-10       Default       
       

Questions? Concerns? Send mail to utpds@cs.utk.edu