SUBROUTINE DLARRF( N, D, L, LD, CLSTRT, CLEND,
$ W, WGAP, WERR,
$ SPDIAM, CLGAPL, CLGAPR, PIVMIN, SIGMA,
$ DPLUS, LPLUS, WORK, INFO )
*
* -- LAPACK auxiliary routine (version 3.2.2) --
* -- LAPACK is a software package provided by Univ. of Tennessee, --
* -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
* June 2010
**
* .. Scalar Arguments ..
INTEGER CLSTRT, CLEND, INFO, N
DOUBLE PRECISION CLGAPL, CLGAPR, PIVMIN, SIGMA, SPDIAM
* ..
* .. Array Arguments ..
DOUBLE PRECISION D( * ), DPLUS( * ), L( * ), LD( * ),
$ LPLUS( * ), W( * ), WGAP( * ), WERR( * ), WORK( * )
* ..
*
* Purpose
* =======
*
* Given the initial representation L D L^T and its cluster of close
* eigenvalues (in a relative measure), W( CLSTRT ), W( CLSTRT+1 ), ...
* W( CLEND ), DLARRF finds a new relatively robust representation
* L D L^T - SIGMA I = L(+) D(+) L(+)^T such that at least one of the
* eigenvalues of L(+) D(+) L(+)^T is relatively isolated.
*
* Arguments
* =========
*
* N (input) INTEGER
* The order of the matrix (subblock, if the matrix splitted).
*
* D (input) DOUBLE PRECISION array, dimension (N)
* The N diagonal elements of the diagonal matrix D.
*
* L (input) DOUBLE PRECISION array, dimension (N-1)
* The (N-1) subdiagonal elements of the unit bidiagonal
* matrix L.
*
* LD (input) DOUBLE PRECISION array, dimension (N-1)
* The (N-1) elements L(i)*D(i).
*
* CLSTRT (input) INTEGER
* The index of the first eigenvalue in the cluster.
*
* CLEND (input) INTEGER
* The index of the last eigenvalue in the cluster.
*
* W (input) DOUBLE PRECISION array, dimension
* dimension is >= (CLEND-CLSTRT+1)
* The eigenvalue APPROXIMATIONS of L D L^T in ascending order.
* W( CLSTRT ) through W( CLEND ) form the cluster of relatively
* close eigenalues.
*
* WGAP (input/output) DOUBLE PRECISION array, dimension
* dimension is >= (CLEND-CLSTRT+1)
* The separation from the right neighbor eigenvalue in W.
*
* WERR (input) DOUBLE PRECISION array, dimension
* dimension is >= (CLEND-CLSTRT+1)
* WERR contain the semiwidth of the uncertainty
* interval of the corresponding eigenvalue APPROXIMATION in W
*
* SPDIAM (input) DOUBLE PRECISION
* estimate of the spectral diameter obtained from the
* Gerschgorin intervals
*
* CLGAPL (input) DOUBLE PRECISION
*
* CLGAPR (input) DOUBLE PRECISION
* absolute gap on each end of the cluster.
* Set by the calling routine to protect against shifts too close
* to eigenvalues outside the cluster.
*
* PIVMIN (input) DOUBLE PRECISION
* The minimum pivot allowed in the Sturm sequence.
*
* SIGMA (output) DOUBLE PRECISION
* The shift used to form L(+) D(+) L(+)^T.
*
* DPLUS (output) DOUBLE PRECISION array, dimension (N)
* The N diagonal elements of the diagonal matrix D(+).
*
* LPLUS (output) DOUBLE PRECISION array, dimension (N-1)
* The first (N-1) elements of LPLUS contain the subdiagonal
* elements of the unit bidiagonal matrix L(+).
*
* WORK (workspace) DOUBLE PRECISION array, dimension (2*N)
* Workspace.
*
* INFO (output) INTEGER
* Signals processing OK (=0) or failure (=1)
*
* Further Details
* ===============
*
* Based on contributions by
* Beresford Parlett, University of California, Berkeley, USA
* Jim Demmel, University of California, Berkeley, USA
* Inderjit Dhillon, University of Texas, Austin, USA
* Osni Marques, LBNL/NERSC, USA
* Christof Voemel, University of California, Berkeley, USA
*
* =====================================================================
*
* .. Parameters ..
DOUBLE PRECISION FOUR, MAXGROWTH1, MAXGROWTH2, ONE, QUART, TWO,
$ ZERO
PARAMETER ( ZERO = 0.0D0, ONE = 1.0D0, TWO = 2.0D0,
$ FOUR = 4.0D0, QUART = 0.25D0,
$ MAXGROWTH1 = 8.D0,
$ MAXGROWTH2 = 8.D0 )
* ..
* .. Local Scalars ..
LOGICAL DORRR1, FORCER, NOFAIL, SAWNAN1, SAWNAN2, TRYRRR1
INTEGER I, INDX, KTRY, KTRYMAX, SLEFT, SRIGHT, SHIFT
PARAMETER ( KTRYMAX = 1, SLEFT = 1, SRIGHT = 2 )
DOUBLE PRECISION AVGAP, BESTSHIFT, CLWDTH, EPS, FACT, FAIL,
$ FAIL2, GROWTHBOUND, LDELTA, LDMAX, LSIGMA,
$ MAX1, MAX2, MINGAP, OLDP, PROD, RDELTA, RDMAX,
$ RRR1, RRR2, RSIGMA, S, SMLGROWTH, TMP, ZNM2
* ..
* .. External Functions ..
LOGICAL DISNAN
DOUBLE PRECISION DLAMCH
EXTERNAL DISNAN, DLAMCH
* ..
* .. External Subroutines ..
EXTERNAL DCOPY
* ..
* .. Intrinsic Functions ..
INTRINSIC ABS
* ..
* .. Executable Statements ..
*
INFO = 0
FACT = DBLE(2**KTRYMAX)
EPS = DLAMCH( 'Precision' )
SHIFT = 0
FORCER = .FALSE.
* Note that we cannot guarantee that for any of the shifts tried,
* the factorization has a small or even moderate element growth.
* There could be Ritz values at both ends of the cluster and despite
* backing off, there are examples where all factorizations tried
* (in IEEE mode, allowing zero pivots & infinities) have INFINITE
* element growth.
* For this reason, we should use PIVMIN in this subroutine so that at
* least the L D L^T factorization exists. It can be checked afterwards
* whether the element growth caused bad residuals/orthogonality.
* Decide whether the code should accept the best among all
* representations despite large element growth or signal INFO=1
NOFAIL = .TRUE.
*
* Compute the average gap length of the cluster
CLWDTH = ABS(W(CLEND)-W(CLSTRT)) + WERR(CLEND) + WERR(CLSTRT)
AVGAP = CLWDTH / DBLE(CLEND-CLSTRT)
MINGAP = MIN(CLGAPL, CLGAPR)
* Initial values for shifts to both ends of cluster
LSIGMA = MIN(W( CLSTRT ),W( CLEND )) - WERR( CLSTRT )
RSIGMA = MAX(W( CLSTRT ),W( CLEND )) + WERR( CLEND )
* Use a small fudge to make sure that we really shift to the outside
LSIGMA = LSIGMA - ABS(LSIGMA)* FOUR * EPS
RSIGMA = RSIGMA + ABS(RSIGMA)* FOUR * EPS
* Compute upper bounds for how much to back off the initial shifts
LDMAX = QUART * MINGAP + TWO * PIVMIN
RDMAX = QUART * MINGAP + TWO * PIVMIN
LDELTA = MAX(AVGAP,WGAP( CLSTRT ))/FACT
RDELTA = MAX(AVGAP,WGAP( CLEND-1 ))/FACT
*
* Initialize the record of the best representation found
*
S = DLAMCH( 'S' )
SMLGROWTH = ONE / S
FAIL = DBLE(N-1)*MINGAP/(SPDIAM*EPS)
FAIL2 = DBLE(N-1)*MINGAP/(SPDIAM*SQRT(EPS))
BESTSHIFT = LSIGMA
*
* while (KTRY <= KTRYMAX)
KTRY = 0
GROWTHBOUND = MAXGROWTH1*SPDIAM
5 CONTINUE
SAWNAN1 = .FALSE.
SAWNAN2 = .FALSE.
* Ensure that we do not back off too much of the initial shifts
LDELTA = MIN(LDMAX,LDELTA)
RDELTA = MIN(RDMAX,RDELTA)
* Compute the element growth when shifting to both ends of the cluster
* accept the shift if there is no element growth at one of the two ends
* Left end
S = -LSIGMA
DPLUS( 1 ) = D( 1 ) + S
IF(ABS(DPLUS(1)).LT.PIVMIN) THEN
DPLUS(1) = -PIVMIN
* Need to set SAWNAN1 because refined RRR test should not be used
* in this case
SAWNAN1 = .TRUE.
ENDIF
MAX1 = ABS( DPLUS( 1 ) )
DO 6 I = 1, N - 1
LPLUS( I ) = LD( I ) / DPLUS( I )
S = S*LPLUS( I )*L( I ) - LSIGMA
DPLUS( I+1 ) = D( I+1 ) + S
IF(ABS(DPLUS(I+1)).LT.PIVMIN) THEN
DPLUS(I+1) = -PIVMIN
* Need to set SAWNAN1 because refined RRR test should not be used
* in this case
SAWNAN1 = .TRUE.
ENDIF
MAX1 = MAX( MAX1,ABS(DPLUS(I+1)) )
6 CONTINUE
SAWNAN1 = SAWNAN1 .OR. DISNAN( MAX1 )
IF( FORCER .OR.
$ (MAX1.LE.GROWTHBOUND .AND. .NOT.SAWNAN1 ) ) THEN
SIGMA = LSIGMA
SHIFT = SLEFT
GOTO 100
ENDIF
* Right end
S = -RSIGMA
WORK( 1 ) = D( 1 ) + S
IF(ABS(WORK(1)).LT.PIVMIN) THEN
WORK(1) = -PIVMIN
* Need to set SAWNAN2 because refined RRR test should not be used
* in this case
SAWNAN2 = .TRUE.
ENDIF
MAX2 = ABS( WORK( 1 ) )
DO 7 I = 1, N - 1
WORK( N+I ) = LD( I ) / WORK( I )
S = S*WORK( N+I )*L( I ) - RSIGMA
WORK( I+1 ) = D( I+1 ) + S
IF(ABS(WORK(I+1)).LT.PIVMIN) THEN
WORK(I+1) = -PIVMIN
* Need to set SAWNAN2 because refined RRR test should not be used
* in this case
SAWNAN2 = .TRUE.
ENDIF
MAX2 = MAX( MAX2,ABS(WORK(I+1)) )
7 CONTINUE
SAWNAN2 = SAWNAN2 .OR. DISNAN( MAX2 )
IF( FORCER .OR.
$ (MAX2.LE.GROWTHBOUND .AND. .NOT.SAWNAN2 ) ) THEN
SIGMA = RSIGMA
SHIFT = SRIGHT
GOTO 100
ENDIF
* If we are at this point, both shifts led to too much element growth
* Record the better of the two shifts (provided it didn't lead to NaN)
IF(SAWNAN1.AND.SAWNAN2) THEN
* both MAX1 and MAX2 are NaN
GOTO 50
ELSE
IF( .NOT.SAWNAN1 ) THEN
INDX = 1
IF(MAX1.LE.SMLGROWTH) THEN
SMLGROWTH = MAX1
BESTSHIFT = LSIGMA
ENDIF
ENDIF
IF( .NOT.SAWNAN2 ) THEN
IF(SAWNAN1 .OR. MAX2.LE.MAX1) INDX = 2
IF(MAX2.LE.SMLGROWTH) THEN
SMLGROWTH = MAX2
BESTSHIFT = RSIGMA
ENDIF
ENDIF
ENDIF
* If we are here, both the left and the right shift led to
* element growth. If the element growth is moderate, then
* we may still accept the representation, if it passes a
* refined test for RRR. This test supposes that no NaN occurred.
* Moreover, we use the refined RRR test only for isolated clusters.
IF((CLWDTH.LT.MINGAP/DBLE(128)) .AND.
$ (MIN(MAX1,MAX2).LT.FAIL2)
$ .AND.(.NOT.SAWNAN1).AND.(.NOT.SAWNAN2)) THEN
DORRR1 = .TRUE.
ELSE
DORRR1 = .FALSE.
ENDIF
TRYRRR1 = .TRUE.
IF( TRYRRR1 .AND. DORRR1 ) THEN
IF(INDX.EQ.1) THEN
TMP = ABS( DPLUS( N ) )
ZNM2 = ONE
PROD = ONE
OLDP = ONE
DO 15 I = N-1, 1, -1
IF( PROD .LE. EPS ) THEN
PROD =
$ ((DPLUS(I+1)*WORK(N+I+1))/(DPLUS(I)*WORK(N+I)))*OLDP
ELSE
PROD = PROD*ABS(WORK(N+I))
END IF
OLDP = PROD
ZNM2 = ZNM2 + PROD**2
TMP = MAX( TMP, ABS( DPLUS( I ) * PROD ))
15 CONTINUE
RRR1 = TMP/( SPDIAM * SQRT( ZNM2 ) )
IF (RRR1.LE.MAXGROWTH2) THEN
SIGMA = LSIGMA
SHIFT = SLEFT
GOTO 100
ENDIF
ELSE IF(INDX.EQ.2) THEN
TMP = ABS( WORK( N ) )
ZNM2 = ONE
PROD = ONE
OLDP = ONE
DO 16 I = N-1, 1, -1
IF( PROD .LE. EPS ) THEN
PROD = ((WORK(I+1)*LPLUS(I+1))/(WORK(I)*LPLUS(I)))*OLDP
ELSE
PROD = PROD*ABS(LPLUS(I))
END IF
OLDP = PROD
ZNM2 = ZNM2 + PROD**2
TMP = MAX( TMP, ABS( WORK( I ) * PROD ))
16 CONTINUE
RRR2 = TMP/( SPDIAM * SQRT( ZNM2 ) )
IF (RRR2.LE.MAXGROWTH2) THEN
SIGMA = RSIGMA
SHIFT = SRIGHT
GOTO 100
ENDIF
END IF
ENDIF
50 CONTINUE
IF (KTRY.LT.KTRYMAX) THEN
* If we are here, both shifts failed also the RRR test.
* Back off to the outside
LSIGMA = MAX( LSIGMA - LDELTA,
$ LSIGMA - LDMAX)
RSIGMA = MIN( RSIGMA + RDELTA,
$ RSIGMA + RDMAX )
LDELTA = TWO * LDELTA
RDELTA = TWO * RDELTA
KTRY = KTRY + 1
GOTO 5
ELSE
* None of the representations investigated satisfied our
* criteria. Take the best one we found.
IF((SMLGROWTH.LT.FAIL).OR.NOFAIL) THEN
LSIGMA = BESTSHIFT
RSIGMA = BESTSHIFT
FORCER = .TRUE.
GOTO 5
ELSE
INFO = 1
RETURN
ENDIF
END IF
100 CONTINUE
IF (SHIFT.EQ.SLEFT) THEN
ELSEIF (SHIFT.EQ.SRIGHT) THEN
* store new L and D back into DPLUS, LPLUS
CALL DCOPY( N, WORK, 1, DPLUS, 1 )
CALL DCOPY( N-1, WORK(N+1), 1, LPLUS, 1 )
ENDIF
RETURN
*
* End of DLARRF
*
END