.SH NAME
TSTIEE - called from the LAPACK routines to choose problem-dependent parameters for the local environment
.SH SYNOPSIS
.TP 13
PROGRAM MAIN
.TP 13
.ti +4
INTEGER
ILAENV
.TP 13
.ti +4
EXTERNAL
ILAENV
.TP 13
.ti +4
INTEGER
IEEEOK
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqWe are about to check whether infinity arithmetic\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )\(aqcan be trusted. If this test hangs, set\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqILAENV = 0 for ISPEC = 10 in LAPACK/SRC/ilaenv.f\(aq
.TP 13
.ti +4
IEEEOK
= ILAENV( 10, \(aqILAENV\(aq, \(aqN\(aq, 1, 2, 3, 4 )
.TP 13
.ti +4
WRITE(
6, FMT = * )
.TP 13
.ti +4
IF(
IEEEOK.EQ.0 ) THEN
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqInfinity arithmetic did not perform per the ieee spec\(aq
.TP 13
.ti +4
ELSE
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqInfinity arithmetic performed as per the ieee spec.\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqHowever, this is not an exhaustive test and does not\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqguarantee that infinity arithmetic meets the\(aq,
\(aq ieee spec.\(aq
.TP 13
.ti +4
END
IF
.TP 13
.ti +4
WRITE(
6, FMT = * )
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqWe are about to check whether NaN arithmetic\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )\(aqcan be trusted. If this test hangs, set\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqILAENV = 0 for ISPEC = 11 in LAPACK/SRC/ilaenv.f\(aq
.TP 13
.ti +4
IEEEOK
= ILAENV( 11, \(aqILAENV\(aq, \(aqN\(aq, 1, 2, 3, 4 )
.TP 13
.ti +4
WRITE(
6, FMT = * )
.TP 13
.ti +4
IF(
IEEEOK.EQ.0 ) THEN
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqNaN arithmetic did not perform per the ieee spec\(aq
.TP 13
.ti +4
ELSE
.TP 13
.ti +4
WRITE(
6, FMT = * )\(aqNaN arithmetic performed as per the ieee\(aq,
\(aq spec.\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )
\(aqHowever, this is not an exhaustive test and does not\(aq
.TP 13
.ti +4
WRITE(
6, FMT = * )\(aqguarantee that NaN arithmetic meets the\(aq,
\(aq ieee spec.\(aq
.TP 13
.ti +4
END
IF
.TP 13
.ti +4
WRITE(
6, FMT = * )
.TP 13
.ti +4
END
.TP 13
.ti +4
INTEGER
FUNCTION ILAENV( ISPEC, NAME, OPTS, N1, N2, N3,
N4 )
.TP 13
.ti +4
CHARACTER*(
* ) NAME, OPTS
.TP 13
.ti +4
INTEGER
ISPEC, N1, N2, N3, N4
.SH PURPOSE
ILAENV is called from the LAPACK routines to choose problem-dependent
parameters for the local environment. See ISPEC for a description of
the parameters.
.br
This version provides a set of parameters which should give good,
but not optimal, performance on many of the currently available
computers. Users are encouraged to modify this subroutine to set
the tuning parameters for their particular machine using the option
and problem size information in the arguments.
.br
This routine will not function correctly if it is converted to all
lower case. Converting it to all upper case is allowed.
.br
.SH ARGUMENTS
.TP 8
ISPEC (input) INTEGER
Specifies the parameter to be returned as the value of
ILAENV.
= 1: the optimal blocksize; if this value is 1, an unblocked
algorithm will give the best performance.
= 2: the minimum block size for which the block routine
should be used; if the usable block size is less than
this value, an unblocked routine should be used.
= 3: the crossover point (in a block routine, for N less
than this value, an unblocked routine should be used)
= 4: the number of shifts, used in the nonsymmetric
eigenvalue routines
= 5: the minimum column dimension for blocking to be used;
rectangular blocks must have dimension at least k by m,
where k is given by ILAENV(2,...) and m by ILAENV(5,...)
= 6: the crossover point for the SVD (when reducing an m by n
matrix to bidiagonal form, if max(m,n)/min(m,n) exceeds
this value, a QR factorization is used first to reduce
the matrix to a triangular form.)
= 7: the number of processors
.br
= 8: the crossover point for the multishift QR and QZ methods
for nonsymmetric eigenvalue problems.
= 9: maximum size of the subproblems at the bottom of the
computation tree in the divide-and-conquer algorithm
(used by xGELSD and xGESDD)
=10: ieee NaN arithmetic can be trusted not to trap
.br
=11: infinity arithmetic can be trusted not to trap
.TP 8
NAME (input) CHARACTER*(*)
The name of the calling subroutine, in either upper case or
lower case.
.TP 8
OPTS (input) CHARACTER*(*)
The character options to the subroutine NAME, concatenated
into a single character string. For example, UPLO = \(aqU\(aq,
TRANS = \(aqT\(aq, and DIAG = \(aqN\(aq for a triangular routine would
be specified as OPTS = \(aqUTN\(aq.
.TP 8
N1 (input) INTEGER
N2 (input) INTEGER
N3 (input) INTEGER
N4 (input) INTEGER
Problem dimensions for the subroutine NAME; these may not all
be required.
>= 0: the value of the parameter specified by ISPEC
< 0: if ILAENV = -k, the k-th argument had an illegal value.
.SH FURTHER DETAILS
The following conventions have been used when calling ILAENV from the
LAPACK routines:
.br
1) OPTS is a concatenation of all of the character options to
subroutine NAME, in the same order that they appear in the
argument list for NAME, even if they are not used in determining
the value of the parameter specified by ISPEC.
.br
2) The problem dimensions N1, N2, N3, N4 are specified in the order
that they appear in the argument list for NAME. N1 is used
first, N2 second, and so on, and unused problem dimensions are
passed a value of -1.
.br
3) The parameter value returned by ILAENV is checked for validity in
the calling subroutine. For example, ILAENV is used to retrieve
the optimal blocksize for STRTRI as follows:
.br
NB = ILAENV( 1, \(aqSTRTRI\(aq, UPLO // DIAG, N, -1, -1, -1 )
IF( NB.LE.1 ) NB = MAX( 1, N )
.br