.TH SSYEVR 1 "November 2006" " LAPACK driver routine (version 3.1) " " LAPACK driver routine (version 3.1) "
.SH NAME
SSYEVR - selected eigenvalues and, optionally, eigenvectors of a real symmetric matrix A
.SH SYNOPSIS
.TP 19
SUBROUTINE SSYEVR(
JOBZ, RANGE, UPLO, N, A, LDA, VL, VU, IL, IU,
ABSTOL, M, W, Z, LDZ, ISUPPZ, WORK, LWORK,
IWORK, LIWORK, INFO )
.TP 19
.ti +4
CHARACTER
JOBZ, RANGE, UPLO
.TP 19
.ti +4
INTEGER
IL, INFO, IU, LDA, LDZ, LIWORK, LWORK, M, N
.TP 19
.ti +4
REAL
ABSTOL, VL, VU
.TP 19
.ti +4
INTEGER
ISUPPZ( * ), IWORK( * )
.TP 19
.ti +4
REAL
A( LDA, * ), W( * ), WORK( * ), Z( LDZ, * )
.SH PURPOSE
SSYEVR computes selected eigenvalues and, optionally, eigenvectors
of a real symmetric matrix A. Eigenvalues and eigenvectors can be
selected by specifying either a range of values or a range of
indices for the desired eigenvalues.
.br
SSYEVR first reduces the matrix A to tridiagonal form T with a call
to SSYTRD. Then, whenever possible, SSYEVR calls SSTEMR to compute
the eigenspectrum using Relatively Robust Representations. SSTEMR
computes eigenvalues by the dqds algorithm, while orthogonal
eigenvectors are computed from various "good" L D L^T representations
(also known as Relatively Robust Representations). Gram-Schmidt
orthogonalization is avoided as far as possible. More specifically,
the various steps of the algorithm are as follows.
.br
For each unreduced block (submatrix) of T,
.br
(a) Compute T - sigma I = L D L^T, so that L and D
.br
define all the wanted eigenvalues to high relative accuracy.
This means that small relative changes in the entries of D and L
cause only small relative changes in the eigenvalues and
eigenvectors. The standard (unfactored) representation of the
tridiagonal matrix T does not have this property in general.
(b) Compute the eigenvalues to suitable accuracy.
.br
If the eigenvectors are desired, the algorithm attains full
accuracy of the computed eigenvalues only right before
the corresponding vectors have to be computed, see steps c) and d).
(c) For each cluster of close eigenvalues, select a new
shift close to the cluster, find a new factorization, and refine
the shifted eigenvalues to suitable accuracy.
.br
(d) For each eigenvalue with a large enough relative separation compute
the corresponding eigenvector by forming a rank revealing twisted
factorization. Go back to (c) for any clusters that remain.
The desired accuracy of the output can be specified by the input
parameter ABSTOL.
.br
For more details, see SSTEMR\(aqs documentation and:
.br
- Inderjit S. Dhillon and Beresford N. Parlett: "Multiple representations
to compute orthogonal eigenvectors of symmetric tridiagonal matrices,"
Linear Algebra and its Applications, 387(1), pp. 1-28, August 2004.
- Inderjit Dhillon and Beresford Parlett: "Orthogonal Eigenvectors and
Relative Gaps," SIAM Journal on Matrix Analysis and Applications, Vol. 25,
2004. Also LAPACK Working Note 154.
.br
- Inderjit Dhillon: "A new O(n^2) algorithm for the symmetric
tridiagonal eigenvalue/eigenvector problem",
.br
Computer Science Division Technical Report No. UCB/CSD-97-971,
UC Berkeley, May 1997.
.br
Note 1 : SSYEVR calls SSTEMR when the full spectrum is requested
on machines which conform to the ieee-754 floating point standard.
SSYEVR calls SSTEBZ and SSTEIN on non-ieee machines and
.br
when partial spectrum requests are made.
.br
Normal execution of SSTEMR may create NaNs and infinities and
hence may abort due to a floating point exception in environments
which do not handle NaNs and infinities in the ieee standard default
manner.
.br
.SH ARGUMENTS
.TP 8
JOBZ (input) CHARACTER*1
= \(aqN\(aq: Compute eigenvalues only;
.br
= \(aqV\(aq: Compute eigenvalues and eigenvectors.
.TP 8
RANGE (input) CHARACTER*1
.br
= \(aqA\(aq: all eigenvalues will be found.
.br
= \(aqV\(aq: all eigenvalues in the half-open interval (VL,VU]
will be found.
= \(aqI\(aq: the IL-th through IU-th eigenvalues will be found.
.TP 8
UPLO (input) CHARACTER*1
.br
= \(aqU\(aq: Upper triangle of A is stored;
.br
= \(aqL\(aq: Lower triangle of A is stored.
.TP 8
N (input) INTEGER
The order of the matrix A. N >= 0.
.TP 8
A (input/output) REAL array, dimension (LDA, N)
On entry, the symmetric matrix A. If UPLO = \(aqU\(aq, the
leading N-by-N upper triangular part of A contains the
upper triangular part of the matrix A. If UPLO = \(aqL\(aq,
the leading N-by-N lower triangular part of A contains
the lower triangular part of the matrix A.
On exit, the lower triangle (if UPLO=\(aqL\(aq) or the upper
triangle (if UPLO=\(aqU\(aq) of A, including the diagonal, is
destroyed.
.TP 8
LDA (input) INTEGER
The leading dimension of the array A. LDA >= max(1,N).
.TP 8
VL (input) REAL
VU (input) REAL
If RANGE=\(aqV\(aq, the lower and upper bounds of the interval to
be searched for eigenvalues. VL < VU.
Not referenced if RANGE = \(aqA\(aq or \(aqI\(aq.
.TP 8
IL (input) INTEGER
IU (input) INTEGER
If RANGE=\(aqI\(aq, the indices (in ascending order) of the
smallest and largest eigenvalues to be returned.
1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0.
Not referenced if RANGE = \(aqA\(aq or \(aqV\(aq.
.TP 8
ABSTOL (input) REAL
The absolute error tolerance for the eigenvalues.
An approximate eigenvalue is accepted as converged
when it is determined to lie in an interval [a,b]
of width less than or equal to
ABSTOL + EPS * max( |a|,|b| ) ,
where EPS is the machine precision. If ABSTOL is less than
or equal to zero, then EPS*|T| will be used in its place,
where |T| is the 1-norm of the tridiagonal matrix obtained
by reducing A to tridiagonal form.
See "Computing Small Singular Values of Bidiagonal Matrices
with Guaranteed High Relative Accuracy," by Demmel and
Kahan, LAPACK Working Note #3.
If high relative accuracy is important, set ABSTOL to
SLAMCH( \(aqSafe minimum\(aq ). Doing so will guarantee that
eigenvalues are computed to high relative accuracy when
possible in future releases. The current code does not
make any guarantees about high relative accuracy, but
future releases will. See J. Barlow and J. Demmel,
"Computing Accurate Eigensystems of Scaled Diagonally
Dominant Matrices", LAPACK Working Note #7, for a discussion
of which matrices define their eigenvalues to high relative
accuracy.
.TP 8
M (output) INTEGER
The total number of eigenvalues found. 0 <= M <= N.
If RANGE = \(aqA\(aq, M = N, and if RANGE = \(aqI\(aq, M = IU-IL+1.
.TP 8
W (output) REAL array, dimension (N)
The first M elements contain the selected eigenvalues in
ascending order.
.TP 8
Z (output) REAL array, dimension (LDZ, max(1,M))
If JOBZ = \(aqV\(aq, then if INFO = 0, the first M columns of Z
contain the orthonormal eigenvectors of the matrix A
corresponding to the selected eigenvalues, with the i-th
column of Z holding the eigenvector associated with W(i).
If JOBZ = \(aqN\(aq, then Z is not referenced.
Note: the user must ensure that at least max(1,M) columns are
supplied in the array Z; if RANGE = \(aqV\(aq, the exact value of M
is not known in advance and an upper bound must be used.
Supplying N columns is always safe.
.TP 8
LDZ (input) INTEGER
The leading dimension of the array Z. LDZ >= 1, and if
JOBZ = \(aqV\(aq, LDZ >= max(1,N).
.TP 8
ISUPPZ (output) INTEGER array, dimension ( 2*max(1,M) )
The support of the eigenvectors in Z, i.e., the indices
indicating the nonzero elements in Z. The i-th eigenvector
is nonzero only in elements ISUPPZ( 2*i-1 ) through
ISUPPZ( 2*i ).
.TP 8
WORK (workspace/output) REAL array, dimension (MAX(1,LWORK))
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
.TP 8
LWORK (input) INTEGER
The dimension of the array WORK. LWORK >= max(1,26*N).
For optimal efficiency, LWORK >= (NB+6)*N,
where NB is the max of the blocksize for SSYTRD and SORMTR
returned by ILAENV.
If LWORK = -1, then a workspace query is assumed; the routine
only calculates the optimal sizes of the WORK and IWORK
arrays, returns these values as the first entries of the WORK
and IWORK arrays, and no error message related to LWORK or
LIWORK is issued by XERBLA.
.TP 8
IWORK (workspace/output) INTEGER array, dimension (MAX(1,LIWORK))
On exit, if INFO = 0, IWORK(1) returns the optimal LWORK.
.TP 8
LIWORK (input) INTEGER
The dimension of the array IWORK. LIWORK >= max(1,10*N).
If LIWORK = -1, then a workspace query is assumed; the
routine only calculates the optimal sizes of the WORK and
IWORK arrays, returns these values as the first entries of
the WORK and IWORK arrays, and no error message related to
LWORK or LIWORK is issued by XERBLA.
.TP 8
INFO (output) INTEGER
= 0: successful exit
.br
< 0: if INFO = -i, the i-th argument had an illegal value
.br
> 0: Internal error
.SH FURTHER DETAILS
Based on contributions by
.br
Inderjit Dhillon, IBM Almaden, USA
.br
Osni Marques, LBNL/NERSC, USA
.br
Ken Stanley, Computer Science Division, University of
.br
California at Berkeley, USA
.br
Jason Riedy, Computer Science Division, University of
.br
California at Berkeley, USA
.br