LAPACK  3.6.1
LAPACK: Linear Algebra PACKage
subroutine zdrgev ( integer  NSIZES,
integer, dimension( * )  NN,
integer  NTYPES,
logical, dimension( * )  DOTYPE,
integer, dimension( 4 )  ISEED,
double precision  THRESH,
integer  NOUNIT,
complex*16, dimension( lda, * )  A,
integer  LDA,
complex*16, dimension( lda, * )  B,
complex*16, dimension( lda, * )  S,
complex*16, dimension( lda, * )  T,
complex*16, dimension( ldq, * )  Q,
integer  LDQ,
complex*16, dimension( ldq, * )  Z,
complex*16, dimension( ldqe, * )  QE,
integer  LDQE,
complex*16, dimension( * )  ALPHA,
complex*16, dimension( * )  BETA,
complex*16, dimension( * )  ALPHA1,
complex*16, dimension( * )  BETA1,
complex*16, dimension( * )  WORK,
integer  LWORK,
double precision, dimension( * )  RWORK,
double precision, dimension( * )  RESULT,
integer  INFO 
)

ZDRGEV

Purpose:
 ZDRGEV checks the nonsymmetric generalized eigenvalue problem driver
 routine ZGGEV.

 ZGGEV computes for a pair of n-by-n nonsymmetric matrices (A,B) the
 generalized eigenvalues and, optionally, the left and right
 eigenvectors.

 A generalized eigenvalue for a pair of matrices (A,B) is a scalar w
 or a ratio  alpha/beta = w, such that A - w*B is singular.  It is
 usually represented as the pair (alpha,beta), as there is reasonable
 interpretation for beta=0, and even for both being zero.

 A right generalized eigenvector corresponding to a generalized
 eigenvalue  w  for a pair of matrices (A,B) is a vector r  such that
 (A - wB) * r = 0.  A left generalized eigenvector is a vector l such
 that l**H * (A - wB) = 0, where l**H is the conjugate-transpose of l.

 When ZDRGEV is called, a number of matrix "sizes" ("n's") and a
 number of matrix "types" are specified.  For each size ("n")
 and each type of matrix, a pair of matrices (A, B) will be generated
 and used for testing.  For each matrix pair, the following tests
 will be performed and compared with the threshold THRESH.

 Results from ZGGEV:

 (1)  max over all left eigenvalue/-vector pairs (alpha/beta,l) of

      | VL**H * (beta A - alpha B) |/( ulp max(|beta A|, |alpha B|) )

      where VL**H is the conjugate-transpose of VL.

 (2)  | |VL(i)| - 1 | / ulp and whether largest component real

      VL(i) denotes the i-th column of VL.

 (3)  max over all left eigenvalue/-vector pairs (alpha/beta,r) of

      | (beta A - alpha B) * VR | / ( ulp max(|beta A|, |alpha B|) )

 (4)  | |VR(i)| - 1 | / ulp and whether largest component real

      VR(i) denotes the i-th column of VR.

 (5)  W(full) = W(partial)
      W(full) denotes the eigenvalues computed when both l and r
      are also computed, and W(partial) denotes the eigenvalues
      computed when only W, only W and r, or only W and l are
      computed.

 (6)  VL(full) = VL(partial)
      VL(full) denotes the left eigenvectors computed when both l
      and r are computed, and VL(partial) denotes the result
      when only l is computed.

 (7)  VR(full) = VR(partial)
      VR(full) denotes the right eigenvectors computed when both l
      and r are also computed, and VR(partial) denotes the result
      when only l is computed.


 Test Matrices
 ---- --------

 The sizes of the test matrices are specified by an array
 NN(1:NSIZES); the value of each element NN(j) specifies one size.
 The "types" are specified by a logical array DOTYPE( 1:NTYPES ); if
 DOTYPE(j) is .TRUE., then matrix type "j" will be generated.
 Currently, the list of possible types is:

 (1)  ( 0, 0 )         (a pair of zero matrices)

 (2)  ( I, 0 )         (an identity and a zero matrix)

 (3)  ( 0, I )         (an identity and a zero matrix)

 (4)  ( I, I )         (a pair of identity matrices)

         t   t
 (5)  ( J , J  )       (a pair of transposed Jordan blocks)

                                     t                ( I   0  )
 (6)  ( X, Y )         where  X = ( J   0  )  and Y = (      t )
                                  ( 0   I  )          ( 0   J  )
                       and I is a k x k identity and J a (k+1)x(k+1)
                       Jordan block; k=(N-1)/2

 (7)  ( D, I )         where D is diag( 0, 1,..., N-1 ) (a diagonal
                       matrix with those diagonal entries.)
 (8)  ( I, D )

 (9)  ( big*D, small*I ) where "big" is near overflow and small=1/big

 (10) ( small*D, big*I )

 (11) ( big*I, small*D )

 (12) ( small*I, big*D )

 (13) ( big*D, big*I )

 (14) ( small*D, small*I )

 (15) ( D1, D2 )        where D1 is diag( 0, 0, 1, ..., N-3, 0 ) and
                        D2 is diag( 0, N-3, N-4,..., 1, 0, 0 )
           t   t
 (16) Q ( J , J ) Z     where Q and Z are random orthogonal matrices.

 (17) Q ( T1, T2 ) Z    where T1 and T2 are upper triangular matrices
                        with random O(1) entries above the diagonal
                        and diagonal entries diag(T1) =
                        ( 0, 0, 1, ..., N-3, 0 ) and diag(T2) =
                        ( 0, N-3, N-4,..., 1, 0, 0 )

 (18) Q ( T1, T2 ) Z    diag(T1) = ( 0, 0, 1, 1, s, ..., s, 0 )
                        diag(T2) = ( 0, 1, 0, 1,..., 1, 0 )
                        s = machine precision.

 (19) Q ( T1, T2 ) Z    diag(T1)=( 0,0,1,1, 1-d, ..., 1-(N-5)*d=s, 0 )
                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0 )

                                                        N-5
 (20) Q ( T1, T2 ) Z    diag(T1)=( 0, 0, 1, 1, a, ..., a   =s, 0 )
                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0, 0 )

 (21) Q ( T1, T2 ) Z    diag(T1)=( 0, 0, 1, r1, r2, ..., r(N-4), 0 )
                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0, 0 )
                        where r1,..., r(N-4) are random.

 (22) Q ( big*T1, small*T2 ) Z    diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (23) Q ( small*T1, big*T2 ) Z    diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (24) Q ( small*T1, small*T2 ) Z  diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (25) Q ( big*T1, big*T2 ) Z      diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (26) Q ( T1, T2 ) Z     where T1 and T2 are random upper-triangular
                         matrices.
Parameters
[in]NSIZES
          NSIZES is INTEGER
          The number of sizes of matrices to use.  If it is zero,
          ZDRGES does nothing.  NSIZES >= 0.
[in]NN
          NN is INTEGER array, dimension (NSIZES)
          An array containing the sizes to be used for the matrices.
          Zero values will be skipped.  NN >= 0.
[in]NTYPES
          NTYPES is INTEGER
          The number of elements in DOTYPE.   If it is zero, ZDRGEV
          does nothing.  It must be at least zero.  If it is MAXTYP+1
          and NSIZES is 1, then an additional type, MAXTYP+1 is
          defined, which is to use whatever matrix is in A.  This
          is only useful if DOTYPE(1:MAXTYP) is .FALSE. and
          DOTYPE(MAXTYP+1) is .TRUE. .
[in]DOTYPE
          DOTYPE is LOGICAL array, dimension (NTYPES)
          If DOTYPE(j) is .TRUE., then for each size in NN a
          matrix of that size and of type j will be generated.
          If NTYPES is smaller than the maximum number of types
          defined (PARAMETER MAXTYP), then types NTYPES+1 through
          MAXTYP will not be generated. If NTYPES is larger
          than MAXTYP, DOTYPE(MAXTYP+1) through DOTYPE(NTYPES)
          will be ignored.
[in,out]ISEED
          ISEED is INTEGER array, dimension (4)
          On entry ISEED specifies the seed of the random number
          generator. The array elements should be between 0 and 4095;
          if not they will be reduced mod 4096. Also, ISEED(4) must
          be odd.  The random number generator uses a linear
          congruential sequence limited to small integers, and so
          should produce machine independent random numbers. The
          values of ISEED are changed on exit, and can be used in the
          next call to ZDRGES to continue the same random number
          sequence.
[in]THRESH
          THRESH is DOUBLE PRECISION
          A test will count as "failed" if the "error", computed as
          described above, exceeds THRESH.  Note that the error is
          scaled to be O(1), so THRESH should be a reasonably small
          multiple of 1, e.g., 10 or 100.  In particular, it should
          not depend on the precision (single vs. double) or the size
          of the matrix.  It must be at least zero.
[in]NOUNIT
          NOUNIT is INTEGER
          The FORTRAN unit number for printing out error messages
          (e.g., if a routine returns IERR not equal to 0.)
[in,out]A
          A is COMPLEX*16 array, dimension(LDA, max(NN))
          Used to hold the original A matrix.  Used as input only
          if NTYPES=MAXTYP+1, DOTYPE(1:MAXTYP)=.FALSE., and
          DOTYPE(MAXTYP+1)=.TRUE.
[in]LDA
          LDA is INTEGER
          The leading dimension of A, B, S, and T.
          It must be at least 1 and at least max( NN ).
[in,out]B
          B is COMPLEX*16 array, dimension(LDA, max(NN))
          Used to hold the original B matrix.  Used as input only
          if NTYPES=MAXTYP+1, DOTYPE(1:MAXTYP)=.FALSE., and
          DOTYPE(MAXTYP+1)=.TRUE.
[out]S
          S is COMPLEX*16 array, dimension (LDA, max(NN))
          The Schur form matrix computed from A by ZGGEV.  On exit, S
          contains the Schur form matrix corresponding to the matrix
          in A.
[out]T
          T is COMPLEX*16 array, dimension (LDA, max(NN))
          The upper triangular matrix computed from B by ZGGEV.
[out]Q
          Q is COMPLEX*16 array, dimension (LDQ, max(NN))
          The (left) eigenvectors matrix computed by ZGGEV.
[in]LDQ
          LDQ is INTEGER
          The leading dimension of Q and Z. It must
          be at least 1 and at least max( NN ).
[out]Z
          Z is COMPLEX*16 array, dimension( LDQ, max(NN) )
          The (right) orthogonal matrix computed by ZGGEV.
[out]QE
          QE is COMPLEX*16 array, dimension( LDQ, max(NN) )
          QE holds the computed right or left eigenvectors.
[in]LDQE
          LDQE is INTEGER
          The leading dimension of QE. LDQE >= max(1,max(NN)).
[out]ALPHA
          ALPHA is COMPLEX*16 array, dimension (max(NN))
[out]BETA
          BETA is COMPLEX*16 array, dimension (max(NN))

          The generalized eigenvalues of (A,B) computed by ZGGEV.
          ( ALPHAR(k)+ALPHAI(k)*i ) / BETA(k) is the k-th
          generalized eigenvalue of A and B.
[out]ALPHA1
          ALPHA1 is COMPLEX*16 array, dimension (max(NN))
[out]BETA1
          BETA1 is COMPLEX*16 array, dimension (max(NN))

          Like ALPHAR, ALPHAI, BETA, these arrays contain the
          eigenvalues of A and B, but those computed when ZGGEV only
          computes a partial eigendecomposition, i.e. not the
          eigenvalues and left and right eigenvectors.
[out]WORK
          WORK is COMPLEX*16 array, dimension (LWORK)
[in]LWORK
          LWORK is INTEGER
          The number of entries in WORK.  LWORK >= N*(N+1)
[out]RWORK
          RWORK is DOUBLE PRECISION array, dimension (8*N)
          Real workspace.
[out]RESULT
          RESULT is DOUBLE PRECISION array, dimension (2)
          The values computed by the tests described above.
          The values are currently limited to 1/ulp, to avoid overflow.
[out]INFO
          INFO is INTEGER
          = 0:  successful exit
          < 0:  if INFO = -i, the i-th argument had an illegal value.
          > 0:  A routine returned an error code.  INFO is the
                absolute value of the INFO value returned.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date
June 2016

Definition at line 401 of file zdrgev.f.

401 *
402 * -- LAPACK test routine (version 3.6.1) --
403 * -- LAPACK is a software package provided by Univ. of Tennessee, --
404 * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
405 * June 2016
406 *
407 * .. Scalar Arguments ..
408  INTEGER info, lda, ldq, ldqe, lwork, nounit, nsizes,
409  $ ntypes
410  DOUBLE PRECISION thresh
411 * ..
412 * .. Array Arguments ..
413  LOGICAL dotype( * )
414  INTEGER iseed( 4 ), nn( * )
415  DOUBLE PRECISION result( * ), rwork( * )
416  COMPLEX*16 a( lda, * ), alpha( * ), alpha1( * ),
417  $ b( lda, * ), beta( * ), beta1( * ),
418  $ q( ldq, * ), qe( ldqe, * ), s( lda, * ),
419  $ t( lda, * ), work( * ), z( ldq, * )
420 * ..
421 *
422 * =====================================================================
423 *
424 * .. Parameters ..
425  DOUBLE PRECISION zero, one
426  parameter ( zero = 0.0d+0, one = 1.0d+0 )
427  COMPLEX*16 czero, cone
428  parameter ( czero = ( 0.0d+0, 0.0d+0 ),
429  $ cone = ( 1.0d+0, 0.0d+0 ) )
430  INTEGER maxtyp
431  parameter ( maxtyp = 26 )
432 * ..
433 * .. Local Scalars ..
434  LOGICAL badnn
435  INTEGER i, iadd, ierr, in, j, jc, jr, jsize, jtype,
436  $ maxwrk, minwrk, mtypes, n, n1, nb, nerrs,
437  $ nmats, nmax, ntestt
438  DOUBLE PRECISION safmax, safmin, ulp, ulpinv
439  COMPLEX*16 ctemp
440 * ..
441 * .. Local Arrays ..
442  LOGICAL lasign( maxtyp ), lbsign( maxtyp )
443  INTEGER ioldsd( 4 ), kadd( 6 ), kamagn( maxtyp ),
444  $ katype( maxtyp ), kazero( maxtyp ),
445  $ kbmagn( maxtyp ), kbtype( maxtyp ),
446  $ kbzero( maxtyp ), kclass( maxtyp ),
447  $ ktrian( maxtyp ), kz1( 6 ), kz2( 6 )
448  DOUBLE PRECISION rmagn( 0: 3 )
449 * ..
450 * .. External Functions ..
451  INTEGER ilaenv
452  DOUBLE PRECISION dlamch
453  COMPLEX*16 zlarnd
454  EXTERNAL ilaenv, dlamch, zlarnd
455 * ..
456 * .. External Subroutines ..
457  EXTERNAL alasvm, dlabad, xerbla, zget52, zggev, zlacpy,
459 * ..
460 * .. Intrinsic Functions ..
461  INTRINSIC abs, dble, dconjg, max, min, sign
462 * ..
463 * .. Data statements ..
464  DATA kclass / 15*1, 10*2, 1*3 /
465  DATA kz1 / 0, 1, 2, 1, 3, 3 /
466  DATA kz2 / 0, 0, 1, 2, 1, 1 /
467  DATA kadd / 0, 0, 0, 0, 3, 2 /
468  DATA katype / 0, 1, 0, 1, 2, 3, 4, 1, 4, 4, 1, 1, 4,
469  $ 4, 4, 2, 4, 5, 8, 7, 9, 4*4, 0 /
470  DATA kbtype / 0, 0, 1, 1, 2, -3, 1, 4, 1, 1, 4, 4,
471  $ 1, 1, -4, 2, -4, 8*8, 0 /
472  DATA kazero / 6*1, 2, 1, 2*2, 2*1, 2*2, 3, 1, 3,
473  $ 4*5, 4*3, 1 /
474  DATA kbzero / 6*1, 1, 2, 2*1, 2*2, 2*1, 4, 1, 4,
475  $ 4*6, 4*4, 1 /
476  DATA kamagn / 8*1, 2, 3, 2, 3, 2, 3, 7*1, 2, 3, 3,
477  $ 2, 1 /
478  DATA kbmagn / 8*1, 3, 2, 3, 2, 2, 3, 7*1, 3, 2, 3,
479  $ 2, 1 /
480  DATA ktrian / 16*0, 10*1 /
481  DATA lasign / 6*.false., .true., .false., 2*.true.,
482  $ 2*.false., 3*.true., .false., .true.,
483  $ 3*.false., 5*.true., .false. /
484  DATA lbsign / 7*.false., .true., 2*.false.,
485  $ 2*.true., 2*.false., .true., .false., .true.,
486  $ 9*.false. /
487 * ..
488 * .. Executable Statements ..
489 *
490 * Check for errors
491 *
492  info = 0
493 *
494  badnn = .false.
495  nmax = 1
496  DO 10 j = 1, nsizes
497  nmax = max( nmax, nn( j ) )
498  IF( nn( j ).LT.0 )
499  $ badnn = .true.
500  10 CONTINUE
501 *
502  IF( nsizes.LT.0 ) THEN
503  info = -1
504  ELSE IF( badnn ) THEN
505  info = -2
506  ELSE IF( ntypes.LT.0 ) THEN
507  info = -3
508  ELSE IF( thresh.LT.zero ) THEN
509  info = -6
510  ELSE IF( lda.LE.1 .OR. lda.LT.nmax ) THEN
511  info = -9
512  ELSE IF( ldq.LE.1 .OR. ldq.LT.nmax ) THEN
513  info = -14
514  ELSE IF( ldqe.LE.1 .OR. ldqe.LT.nmax ) THEN
515  info = -17
516  END IF
517 *
518 * Compute workspace
519 * (Note: Comments in the code beginning "Workspace:" describe the
520 * minimal amount of workspace needed at that point in the code,
521 * as well as the preferred amount for good performance.
522 * NB refers to the optimal block size for the immediately
523 * following subroutine, as returned by ILAENV.
524 *
525  minwrk = 1
526  IF( info.EQ.0 .AND. lwork.GE.1 ) THEN
527  minwrk = nmax*( nmax+1 )
528  nb = max( 1, ilaenv( 1, 'ZGEQRF', ' ', nmax, nmax, -1, -1 ),
529  $ ilaenv( 1, 'ZUNMQR', 'LC', nmax, nmax, nmax, -1 ),
530  $ ilaenv( 1, 'ZUNGQR', ' ', nmax, nmax, nmax, -1 ) )
531  maxwrk = max( 2*nmax, nmax*( nb+1 ), nmax*( nmax+1 ) )
532  work( 1 ) = maxwrk
533  END IF
534 *
535  IF( lwork.LT.minwrk )
536  $ info = -23
537 *
538  IF( info.NE.0 ) THEN
539  CALL xerbla( 'ZDRGEV', -info )
540  RETURN
541  END IF
542 *
543 * Quick return if possible
544 *
545  IF( nsizes.EQ.0 .OR. ntypes.EQ.0 )
546  $ RETURN
547 *
548  ulp = dlamch( 'Precision' )
549  safmin = dlamch( 'Safe minimum' )
550  safmin = safmin / ulp
551  safmax = one / safmin
552  CALL dlabad( safmin, safmax )
553  ulpinv = one / ulp
554 *
555 * The values RMAGN(2:3) depend on N, see below.
556 *
557  rmagn( 0 ) = zero
558  rmagn( 1 ) = one
559 *
560 * Loop over sizes, types
561 *
562  ntestt = 0
563  nerrs = 0
564  nmats = 0
565 *
566  DO 220 jsize = 1, nsizes
567  n = nn( jsize )
568  n1 = max( 1, n )
569  rmagn( 2 ) = safmax*ulp / dble( n1 )
570  rmagn( 3 ) = safmin*ulpinv*n1
571 *
572  IF( nsizes.NE.1 ) THEN
573  mtypes = min( maxtyp, ntypes )
574  ELSE
575  mtypes = min( maxtyp+1, ntypes )
576  END IF
577 *
578  DO 210 jtype = 1, mtypes
579  IF( .NOT.dotype( jtype ) )
580  $ GO TO 210
581  nmats = nmats + 1
582 *
583 * Save ISEED in case of an error.
584 *
585  DO 20 j = 1, 4
586  ioldsd( j ) = iseed( j )
587  20 CONTINUE
588 *
589 * Generate test matrices A and B
590 *
591 * Description of control parameters:
592 *
593 * KZLASS: =1 means w/o rotation, =2 means w/ rotation,
594 * =3 means random.
595 * KATYPE: the "type" to be passed to ZLATM4 for computing A.
596 * KAZERO: the pattern of zeros on the diagonal for A:
597 * =1: ( xxx ), =2: (0, xxx ) =3: ( 0, 0, xxx, 0 ),
598 * =4: ( 0, xxx, 0, 0 ), =5: ( 0, 0, 1, xxx, 0 ),
599 * =6: ( 0, 1, 0, xxx, 0 ). (xxx means a string of
600 * non-zero entries.)
601 * KAMAGN: the magnitude of the matrix: =0: zero, =1: O(1),
602 * =2: large, =3: small.
603 * LASIGN: .TRUE. if the diagonal elements of A are to be
604 * multiplied by a random magnitude 1 number.
605 * KBTYPE, KBZERO, KBMAGN, LBSIGN: the same, but for B.
606 * KTRIAN: =0: don't fill in the upper triangle, =1: do.
607 * KZ1, KZ2, KADD: used to implement KAZERO and KBZERO.
608 * RMAGN: used to implement KAMAGN and KBMAGN.
609 *
610  IF( mtypes.GT.maxtyp )
611  $ GO TO 100
612  ierr = 0
613  IF( kclass( jtype ).LT.3 ) THEN
614 *
615 * Generate A (w/o rotation)
616 *
617  IF( abs( katype( jtype ) ).EQ.3 ) THEN
618  in = 2*( ( n-1 ) / 2 ) + 1
619  IF( in.NE.n )
620  $ CALL zlaset( 'Full', n, n, czero, czero, a, lda )
621  ELSE
622  in = n
623  END IF
624  CALL zlatm4( katype( jtype ), in, kz1( kazero( jtype ) ),
625  $ kz2( kazero( jtype ) ), lasign( jtype ),
626  $ rmagn( kamagn( jtype ) ), ulp,
627  $ rmagn( ktrian( jtype )*kamagn( jtype ) ), 2,
628  $ iseed, a, lda )
629  iadd = kadd( kazero( jtype ) )
630  IF( iadd.GT.0 .AND. iadd.LE.n )
631  $ a( iadd, iadd ) = rmagn( kamagn( jtype ) )
632 *
633 * Generate B (w/o rotation)
634 *
635  IF( abs( kbtype( jtype ) ).EQ.3 ) THEN
636  in = 2*( ( n-1 ) / 2 ) + 1
637  IF( in.NE.n )
638  $ CALL zlaset( 'Full', n, n, czero, czero, b, lda )
639  ELSE
640  in = n
641  END IF
642  CALL zlatm4( kbtype( jtype ), in, kz1( kbzero( jtype ) ),
643  $ kz2( kbzero( jtype ) ), lbsign( jtype ),
644  $ rmagn( kbmagn( jtype ) ), one,
645  $ rmagn( ktrian( jtype )*kbmagn( jtype ) ), 2,
646  $ iseed, b, lda )
647  iadd = kadd( kbzero( jtype ) )
648  IF( iadd.NE.0 .AND. iadd.LE.n )
649  $ b( iadd, iadd ) = rmagn( kbmagn( jtype ) )
650 *
651  IF( kclass( jtype ).EQ.2 .AND. n.GT.0 ) THEN
652 *
653 * Include rotations
654 *
655 * Generate Q, Z as Householder transformations times
656 * a diagonal matrix.
657 *
658  DO 40 jc = 1, n - 1
659  DO 30 jr = jc, n
660  q( jr, jc ) = zlarnd( 3, iseed )
661  z( jr, jc ) = zlarnd( 3, iseed )
662  30 CONTINUE
663  CALL zlarfg( n+1-jc, q( jc, jc ), q( jc+1, jc ), 1,
664  $ work( jc ) )
665  work( 2*n+jc ) = sign( one, dble( q( jc, jc ) ) )
666  q( jc, jc ) = cone
667  CALL zlarfg( n+1-jc, z( jc, jc ), z( jc+1, jc ), 1,
668  $ work( n+jc ) )
669  work( 3*n+jc ) = sign( one, dble( z( jc, jc ) ) )
670  z( jc, jc ) = cone
671  40 CONTINUE
672  ctemp = zlarnd( 3, iseed )
673  q( n, n ) = cone
674  work( n ) = czero
675  work( 3*n ) = ctemp / abs( ctemp )
676  ctemp = zlarnd( 3, iseed )
677  z( n, n ) = cone
678  work( 2*n ) = czero
679  work( 4*n ) = ctemp / abs( ctemp )
680 *
681 * Apply the diagonal matrices
682 *
683  DO 60 jc = 1, n
684  DO 50 jr = 1, n
685  a( jr, jc ) = work( 2*n+jr )*
686  $ dconjg( work( 3*n+jc ) )*
687  $ a( jr, jc )
688  b( jr, jc ) = work( 2*n+jr )*
689  $ dconjg( work( 3*n+jc ) )*
690  $ b( jr, jc )
691  50 CONTINUE
692  60 CONTINUE
693  CALL zunm2r( 'L', 'N', n, n, n-1, q, ldq, work, a,
694  $ lda, work( 2*n+1 ), ierr )
695  IF( ierr.NE.0 )
696  $ GO TO 90
697  CALL zunm2r( 'R', 'C', n, n, n-1, z, ldq, work( n+1 ),
698  $ a, lda, work( 2*n+1 ), ierr )
699  IF( ierr.NE.0 )
700  $ GO TO 90
701  CALL zunm2r( 'L', 'N', n, n, n-1, q, ldq, work, b,
702  $ lda, work( 2*n+1 ), ierr )
703  IF( ierr.NE.0 )
704  $ GO TO 90
705  CALL zunm2r( 'R', 'C', n, n, n-1, z, ldq, work( n+1 ),
706  $ b, lda, work( 2*n+1 ), ierr )
707  IF( ierr.NE.0 )
708  $ GO TO 90
709  END IF
710  ELSE
711 *
712 * Random matrices
713 *
714  DO 80 jc = 1, n
715  DO 70 jr = 1, n
716  a( jr, jc ) = rmagn( kamagn( jtype ) )*
717  $ zlarnd( 4, iseed )
718  b( jr, jc ) = rmagn( kbmagn( jtype ) )*
719  $ zlarnd( 4, iseed )
720  70 CONTINUE
721  80 CONTINUE
722  END IF
723 *
724  90 CONTINUE
725 *
726  IF( ierr.NE.0 ) THEN
727  WRITE( nounit, fmt = 9999 )'Generator', ierr, n, jtype,
728  $ ioldsd
729  info = abs( ierr )
730  RETURN
731  END IF
732 *
733  100 CONTINUE
734 *
735  DO 110 i = 1, 7
736  result( i ) = -one
737  110 CONTINUE
738 *
739 * Call ZGGEV to compute eigenvalues and eigenvectors.
740 *
741  CALL zlacpy( ' ', n, n, a, lda, s, lda )
742  CALL zlacpy( ' ', n, n, b, lda, t, lda )
743  CALL zggev( 'V', 'V', n, s, lda, t, lda, alpha, beta, q,
744  $ ldq, z, ldq, work, lwork, rwork, ierr )
745  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
746  result( 1 ) = ulpinv
747  WRITE( nounit, fmt = 9999 )'ZGGEV1', ierr, n, jtype,
748  $ ioldsd
749  info = abs( ierr )
750  GO TO 190
751  END IF
752 *
753 * Do the tests (1) and (2)
754 *
755  CALL zget52( .true., n, a, lda, b, lda, q, ldq, alpha, beta,
756  $ work, rwork, result( 1 ) )
757  IF( result( 2 ).GT.thresh ) THEN
758  WRITE( nounit, fmt = 9998 )'Left', 'ZGGEV1',
759  $ result( 2 ), n, jtype, ioldsd
760  END IF
761 *
762 * Do the tests (3) and (4)
763 *
764  CALL zget52( .false., n, a, lda, b, lda, z, ldq, alpha,
765  $ beta, work, rwork, result( 3 ) )
766  IF( result( 4 ).GT.thresh ) THEN
767  WRITE( nounit, fmt = 9998 )'Right', 'ZGGEV1',
768  $ result( 4 ), n, jtype, ioldsd
769  END IF
770 *
771 * Do test (5)
772 *
773  CALL zlacpy( ' ', n, n, a, lda, s, lda )
774  CALL zlacpy( ' ', n, n, b, lda, t, lda )
775  CALL zggev( 'N', 'N', n, s, lda, t, lda, alpha1, beta1, q,
776  $ ldq, z, ldq, work, lwork, rwork, ierr )
777  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
778  result( 1 ) = ulpinv
779  WRITE( nounit, fmt = 9999 )'ZGGEV2', ierr, n, jtype,
780  $ ioldsd
781  info = abs( ierr )
782  GO TO 190
783  END IF
784 *
785  DO 120 j = 1, n
786  IF( alpha( j ).NE.alpha1( j ) .OR. beta( j ).NE.
787  $ beta1( j ) )result( 5 ) = ulpinv
788  120 CONTINUE
789 *
790 * Do test (6): Compute eigenvalues and left eigenvectors,
791 * and test them
792 *
793  CALL zlacpy( ' ', n, n, a, lda, s, lda )
794  CALL zlacpy( ' ', n, n, b, lda, t, lda )
795  CALL zggev( 'V', 'N', n, s, lda, t, lda, alpha1, beta1, qe,
796  $ ldqe, z, ldq, work, lwork, rwork, ierr )
797  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
798  result( 1 ) = ulpinv
799  WRITE( nounit, fmt = 9999 )'ZGGEV3', ierr, n, jtype,
800  $ ioldsd
801  info = abs( ierr )
802  GO TO 190
803  END IF
804 *
805  DO 130 j = 1, n
806  IF( alpha( j ).NE.alpha1( j ) .OR. beta( j ).NE.
807  $ beta1( j ) )result( 6 ) = ulpinv
808  130 CONTINUE
809 *
810  DO 150 j = 1, n
811  DO 140 jc = 1, n
812  IF( q( j, jc ).NE.qe( j, jc ) )
813  $ result( 6 ) = ulpinv
814  140 CONTINUE
815  150 CONTINUE
816 *
817 * Do test (7): Compute eigenvalues and right eigenvectors,
818 * and test them
819 *
820  CALL zlacpy( ' ', n, n, a, lda, s, lda )
821  CALL zlacpy( ' ', n, n, b, lda, t, lda )
822  CALL zggev( 'N', 'V', n, s, lda, t, lda, alpha1, beta1, q,
823  $ ldq, qe, ldqe, work, lwork, rwork, ierr )
824  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
825  result( 1 ) = ulpinv
826  WRITE( nounit, fmt = 9999 )'ZGGEV4', ierr, n, jtype,
827  $ ioldsd
828  info = abs( ierr )
829  GO TO 190
830  END IF
831 *
832  DO 160 j = 1, n
833  IF( alpha( j ).NE.alpha1( j ) .OR. beta( j ).NE.
834  $ beta1( j ) )result( 7 ) = ulpinv
835  160 CONTINUE
836 *
837  DO 180 j = 1, n
838  DO 170 jc = 1, n
839  IF( z( j, jc ).NE.qe( j, jc ) )
840  $ result( 7 ) = ulpinv
841  170 CONTINUE
842  180 CONTINUE
843 *
844 * End of Loop -- Check for RESULT(j) > THRESH
845 *
846  190 CONTINUE
847 *
848  ntestt = ntestt + 7
849 *
850 * Print out tests which fail.
851 *
852  DO 200 jr = 1, 7
853  IF( result( jr ).GE.thresh ) THEN
854 *
855 * If this is the first test to fail,
856 * print a header to the data file.
857 *
858  IF( nerrs.EQ.0 ) THEN
859  WRITE( nounit, fmt = 9997 )'ZGV'
860 *
861 * Matrix types
862 *
863  WRITE( nounit, fmt = 9996 )
864  WRITE( nounit, fmt = 9995 )
865  WRITE( nounit, fmt = 9994 )'Orthogonal'
866 *
867 * Tests performed
868 *
869  WRITE( nounit, fmt = 9993 )
870 *
871  END IF
872  nerrs = nerrs + 1
873  IF( result( jr ).LT.10000.0d0 ) THEN
874  WRITE( nounit, fmt = 9992 )n, jtype, ioldsd, jr,
875  $ result( jr )
876  ELSE
877  WRITE( nounit, fmt = 9991 )n, jtype, ioldsd, jr,
878  $ result( jr )
879  END IF
880  END IF
881  200 CONTINUE
882 *
883  210 CONTINUE
884  220 CONTINUE
885 *
886 * Summary
887 *
888  CALL alasvm( 'ZGV', nounit, nerrs, ntestt, 0 )
889 *
890  work( 1 ) = maxwrk
891 *
892  RETURN
893 *
894  9999 FORMAT( ' ZDRGEV: ', a, ' returned INFO=', i6, '.', / 3x, 'N=',
895  $ i6, ', JTYPE=', i6, ', ISEED=(', 3( i5, ',' ), i5, ')' )
896 *
897  9998 FORMAT( ' ZDRGEV: ', a, ' Eigenvectors from ', a, ' incorrectly ',
898  $ 'normalized.', / ' Bits of error=', 0p, g10.3, ',', 3x,
899  $ 'N=', i4, ', JTYPE=', i3, ', ISEED=(', 3( i4, ',' ), i5,
900  $ ')' )
901 *
902  9997 FORMAT( / 1x, a3, ' -- Complex Generalized eigenvalue problem ',
903  $ 'driver' )
904 *
905  9996 FORMAT( ' Matrix types (see ZDRGEV for details): ' )
906 *
907  9995 FORMAT( ' Special Matrices:', 23x,
908  $ '(J''=transposed Jordan block)',
909  $ / ' 1=(0,0) 2=(I,0) 3=(0,I) 4=(I,I) 5=(J'',J'') ',
910  $ '6=(diag(J'',I), diag(I,J''))', / ' Diagonal Matrices: ( ',
911  $ 'D=diag(0,1,2,...) )', / ' 7=(D,I) 9=(large*D, small*I',
912  $ ') 11=(large*I, small*D) 13=(large*D, large*I)', /
913  $ ' 8=(I,D) 10=(small*D, large*I) 12=(small*I, large*D) ',
914  $ ' 14=(small*D, small*I)', / ' 15=(D, reversed D)' )
915  9994 FORMAT( ' Matrices Rotated by Random ', a, ' Matrices U, V:',
916  $ / ' 16=Transposed Jordan Blocks 19=geometric ',
917  $ 'alpha, beta=0,1', / ' 17=arithm. alpha&beta ',
918  $ ' 20=arithmetic alpha, beta=0,1', / ' 18=clustered ',
919  $ 'alpha, beta=0,1 21=random alpha, beta=0,1',
920  $ / ' Large & Small Matrices:', / ' 22=(large, small) ',
921  $ '23=(small,large) 24=(small,small) 25=(large,large)',
922  $ / ' 26=random O(1) matrices.' )
923 *
924  9993 FORMAT( / ' Tests performed: ',
925  $ / ' 1 = max | ( b A - a B )''*l | / const.,',
926  $ / ' 2 = | |VR(i)| - 1 | / ulp,',
927  $ / ' 3 = max | ( b A - a B )*r | / const.',
928  $ / ' 4 = | |VL(i)| - 1 | / ulp,',
929  $ / ' 5 = 0 if W same no matter if r or l computed,',
930  $ / ' 6 = 0 if l same no matter if l computed,',
931  $ / ' 7 = 0 if r same no matter if r computed,', / 1x )
932  9992 FORMAT( ' Matrix order=', i5, ', type=', i2, ', seed=',
933  $ 4( i4, ',' ), ' result ', i2, ' is', 0p, f8.2 )
934  9991 FORMAT( ' Matrix order=', i5, ', type=', i2, ', seed=',
935  $ 4( i4, ',' ), ' result ', i2, ' is', 1p, d10.3 )
936 *
937 * End of ZDRGEV
938 *
subroutine alasvm(TYPE, NOUT, NFAIL, NRUN, NERRS)
ALASVM
Definition: alasvm.f:75
subroutine zlacpy(UPLO, M, N, A, LDA, B, LDB)
ZLACPY copies all or part of one two-dimensional array to another.
Definition: zlacpy.f:105
double precision function dlamch(CMACH)
DLAMCH
Definition: dlamch.f:65
subroutine zlarfg(N, ALPHA, X, INCX, TAU)
ZLARFG generates an elementary reflector (Householder matrix).
Definition: zlarfg.f:108
subroutine zget52(LEFT, N, A, LDA, B, LDB, E, LDE, ALPHA, BETA, WORK, RWORK, RESULT)
ZGET52
Definition: zget52.f:164
subroutine zlaset(UPLO, M, N, ALPHA, BETA, A, LDA)
ZLASET initializes the off-diagonal elements and the diagonal elements of a matrix to given values...
Definition: zlaset.f:108
subroutine xerbla(SRNAME, INFO)
XERBLA
Definition: xerbla.f:62
subroutine dlabad(SMALL, LARGE)
DLABAD
Definition: dlabad.f:76
subroutine zunm2r(SIDE, TRANS, M, N, K, A, LDA, TAU, C, LDC, WORK, INFO)
ZUNM2R multiplies a general matrix by the unitary matrix from a QR factorization determined by cgeqrf...
Definition: zunm2r.f:161
subroutine zlatm4(ITYPE, N, NZ1, NZ2, RSIGN, AMAGN, RCOND, TRIANG, IDIST, ISEED, A, LDA)
ZLATM4
Definition: zlatm4.f:173
integer function ilaenv(ISPEC, NAME, OPTS, N1, N2, N3, N4)
Definition: tstiee.f:83
subroutine zggev(JOBVL, JOBVR, N, A, LDA, B, LDB, ALPHA, BETA, VL, LDVL, VR, LDVR, WORK, LWORK, RWORK, INFO)
ZGGEV computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices ...
Definition: zggev.f:219
complex *16 function zlarnd(IDIST, ISEED)
ZLARND
Definition: zlarnd.f:77

Here is the call graph for this function:

Here is the caller graph for this function: