LAPACK  3.6.1
LAPACK: Linear Algebra PACKage
subroutine sdrgev3 ( integer  NSIZES,
integer, dimension( * )  NN,
integer  NTYPES,
logical, dimension( * )  DOTYPE,
integer, dimension( 4 )  ISEED,
real  THRESH,
integer  NOUNIT,
real, dimension( lda, * )  A,
integer  LDA,
real, dimension( lda, * )  B,
real, dimension( lda, * )  S,
real, dimension( lda, * )  T,
real, dimension( ldq, * )  Q,
integer  LDQ,
real, dimension( ldq, * )  Z,
real, dimension( ldqe, * )  QE,
integer  LDQE,
real, dimension( * )  ALPHAR,
real, dimension( * )  ALPHAI,
real, dimension( * )  BETA,
real, dimension( * )  ALPHR1,
real, dimension( * )  ALPHI1,
real, dimension( * )  BETA1,
real, dimension( * )  WORK,
integer  LWORK,
real, dimension( * )  RESULT,
integer  INFO 
)

SDRGEV3

Purpose:
 SDRGEV3 checks the nonsymmetric generalized eigenvalue problem driver
 routine SGGEV3.

 SGGEV3 computes for a pair of n-by-n nonsymmetric matrices (A,B) the
 generalized eigenvalues and, optionally, the left and right
 eigenvectors.

 A generalized eigenvalue for a pair of matrices (A,B) is a scalar w
 or a ratio  alpha/beta = w, such that A - w*B is singular.  It is
 usually represented as the pair (alpha,beta), as there is reasonable
 interpretation for beta=0, and even for both being zero.

 A right generalized eigenvector corresponding to a generalized
 eigenvalue  w  for a pair of matrices (A,B) is a vector r  such that
 (A - wB) * r = 0.  A left generalized eigenvector is a vector l such
 that l**H * (A - wB) = 0, where l**H is the conjugate-transpose of l.

 When SDRGEV3 is called, a number of matrix "sizes" ("n's") and a
 number of matrix "types" are specified.  For each size ("n")
 and each type of matrix, a pair of matrices (A, B) will be generated
 and used for testing.  For each matrix pair, the following tests
 will be performed and compared with the threshold THRESH.

 Results from SGGEV3:

 (1)  max over all left eigenvalue/-vector pairs (alpha/beta,l) of

      | VL**H * (beta A - alpha B) |/( ulp max(|beta A|, |alpha B|) )

      where VL**H is the conjugate-transpose of VL.

 (2)  | |VL(i)| - 1 | / ulp and whether largest component real

      VL(i) denotes the i-th column of VL.

 (3)  max over all left eigenvalue/-vector pairs (alpha/beta,r) of

      | (beta A - alpha B) * VR | / ( ulp max(|beta A|, |alpha B|) )

 (4)  | |VR(i)| - 1 | / ulp and whether largest component real

      VR(i) denotes the i-th column of VR.

 (5)  W(full) = W(partial)
      W(full) denotes the eigenvalues computed when both l and r
      are also computed, and W(partial) denotes the eigenvalues
      computed when only W, only W and r, or only W and l are
      computed.

 (6)  VL(full) = VL(partial)
      VL(full) denotes the left eigenvectors computed when both l
      and r are computed, and VL(partial) denotes the result
      when only l is computed.

 (7)  VR(full) = VR(partial)
      VR(full) denotes the right eigenvectors computed when both l
      and r are also computed, and VR(partial) denotes the result
      when only l is computed.


 Test Matrices
 ---- --------

 The sizes of the test matrices are specified by an array
 NN(1:NSIZES); the value of each element NN(j) specifies one size.
 The "types" are specified by a logical array DOTYPE( 1:NTYPES ); if
 DOTYPE(j) is .TRUE., then matrix type "j" will be generated.
 Currently, the list of possible types is:

 (1)  ( 0, 0 )         (a pair of zero matrices)

 (2)  ( I, 0 )         (an identity and a zero matrix)

 (3)  ( 0, I )         (an identity and a zero matrix)

 (4)  ( I, I )         (a pair of identity matrices)

         t   t
 (5)  ( J , J  )       (a pair of transposed Jordan blocks)

                                     t                ( I   0  )
 (6)  ( X, Y )         where  X = ( J   0  )  and Y = (      t )
                                  ( 0   I  )          ( 0   J  )
                       and I is a k x k identity and J a (k+1)x(k+1)
                       Jordan block; k=(N-1)/2

 (7)  ( D, I )         where D is diag( 0, 1,..., N-1 ) (a diagonal
                       matrix with those diagonal entries.)
 (8)  ( I, D )

 (9)  ( big*D, small*I ) where "big" is near overflow and small=1/big

 (10) ( small*D, big*I )

 (11) ( big*I, small*D )

 (12) ( small*I, big*D )

 (13) ( big*D, big*I )

 (14) ( small*D, small*I )

 (15) ( D1, D2 )        where D1 is diag( 0, 0, 1, ..., N-3, 0 ) and
                        D2 is diag( 0, N-3, N-4,..., 1, 0, 0 )
           t   t
 (16) Q ( J , J ) Z     where Q and Z are random orthogonal matrices.

 (17) Q ( T1, T2 ) Z    where T1 and T2 are upper triangular matrices
                        with random O(1) entries above the diagonal
                        and diagonal entries diag(T1) =
                        ( 0, 0, 1, ..., N-3, 0 ) and diag(T2) =
                        ( 0, N-3, N-4,..., 1, 0, 0 )

 (18) Q ( T1, T2 ) Z    diag(T1) = ( 0, 0, 1, 1, s, ..., s, 0 )
                        diag(T2) = ( 0, 1, 0, 1,..., 1, 0 )
                        s = machine precision.

 (19) Q ( T1, T2 ) Z    diag(T1)=( 0,0,1,1, 1-d, ..., 1-(N-5)*d=s, 0 )
                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0 )

                                                        N-5
 (20) Q ( T1, T2 ) Z    diag(T1)=( 0, 0, 1, 1, a, ..., a   =s, 0 )
                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0, 0 )

 (21) Q ( T1, T2 ) Z    diag(T1)=( 0, 0, 1, r1, r2, ..., r(N-4), 0 )
                        diag(T2) = ( 0, 1, 0, 1, ..., 1, 0, 0 )
                        where r1,..., r(N-4) are random.

 (22) Q ( big*T1, small*T2 ) Z    diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (23) Q ( small*T1, big*T2 ) Z    diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (24) Q ( small*T1, small*T2 ) Z  diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (25) Q ( big*T1, big*T2 ) Z      diag(T1) = ( 0, 0, 1, ..., N-3, 0 )
                                  diag(T2) = ( 0, 1, ..., 1, 0, 0 )

 (26) Q ( T1, T2 ) Z     where T1 and T2 are random upper-triangular
                         matrices.
Parameters
[in]NSIZES
          NSIZES is INTEGER
          The number of sizes of matrices to use.  If it is zero,
          SDRGEV3 does nothing.  NSIZES >= 0.
[in]NN
          NN is INTEGER array, dimension (NSIZES)
          An array containing the sizes to be used for the matrices.
          Zero values will be skipped.  NN >= 0.
[in]NTYPES
          NTYPES is INTEGER
          The number of elements in DOTYPE.   If it is zero, SDRGEV3
          does nothing.  It must be at least zero.  If it is MAXTYP+1
          and NSIZES is 1, then an additional type, MAXTYP+1 is
          defined, which is to use whatever matrix is in A.  This
          is only useful if DOTYPE(1:MAXTYP) is .FALSE. and
          DOTYPE(MAXTYP+1) is .TRUE. .
[in]DOTYPE
          DOTYPE is LOGICAL array, dimension (NTYPES)
          If DOTYPE(j) is .TRUE., then for each size in NN a
          matrix of that size and of type j will be generated.
          If NTYPES is smaller than the maximum number of types
          defined (PARAMETER MAXTYP), then types NTYPES+1 through
          MAXTYP will not be generated. If NTYPES is larger
          than MAXTYP, DOTYPE(MAXTYP+1) through DOTYPE(NTYPES)
          will be ignored.
[in,out]ISEED
          ISEED is INTEGER array, dimension (4)
          On entry ISEED specifies the seed of the random number
          generator. The array elements should be between 0 and 4095;
          if not they will be reduced mod 4096. Also, ISEED(4) must
          be odd.  The random number generator uses a linear
          congruential sequence limited to small integers, and so
          should produce machine independent random numbers. The
          values of ISEED are changed on exit, and can be used in the
          next call to SDRGEV3 to continue the same random number
          sequence.
[in]THRESH
          THRESH is REAL
          A test will count as "failed" if the "error", computed as
          described above, exceeds THRESH.  Note that the error is
          scaled to be O(1), so THRESH should be a reasonably small
          multiple of 1, e.g., 10 or 100.  In particular, it should
          not depend on the precision (single vs. double) or the size
          of the matrix.  It must be at least zero.
[in]NOUNIT
          NOUNIT is INTEGER
          The FORTRAN unit number for printing out error messages
          (e.g., if a routine returns IERR not equal to 0.)
[in,out]A
          A is REAL array,
                                       dimension(LDA, max(NN))
          Used to hold the original A matrix.  Used as input only
          if NTYPES=MAXTYP+1, DOTYPE(1:MAXTYP)=.FALSE., and
          DOTYPE(MAXTYP+1)=.TRUE.
[in]LDA
          LDA is INTEGER
          The leading dimension of A, B, S, and T.
          It must be at least 1 and at least max( NN ).
[in,out]B
          B is REAL array,
                                       dimension(LDA, max(NN))
          Used to hold the original B matrix.  Used as input only
          if NTYPES=MAXTYP+1, DOTYPE(1:MAXTYP)=.FALSE., and
          DOTYPE(MAXTYP+1)=.TRUE.
[out]S
          S is REAL array,
                                 dimension (LDA, max(NN))
          The Schur form matrix computed from A by SGGEV3.  On exit, S
          contains the Schur form matrix corresponding to the matrix
          in A.
[out]T
          T is REAL array,
                                 dimension (LDA, max(NN))
          The upper triangular matrix computed from B by SGGEV3.
[out]Q
          Q is REAL array,
                                 dimension (LDQ, max(NN))
          The (left) eigenvectors matrix computed by SGGEV3.
[in]LDQ
          LDQ is INTEGER
          The leading dimension of Q and Z. It must
          be at least 1 and at least max( NN ).
[out]Z
          Z is REAL array, dimension( LDQ, max(NN) )
          The (right) orthogonal matrix computed by SGGEV3.
[out]QE
          QE is REAL array, dimension( LDQ, max(NN) )
          QE holds the computed right or left eigenvectors.
[in]LDQE
          LDQE is INTEGER
          The leading dimension of QE. LDQE >= max(1,max(NN)).
[out]ALPHAR
          ALPHAR is REAL array, dimension (max(NN))
[out]ALPHAI
          ALPHAI is REAL array, dimension (max(NN))
[out]BETA
          BETA is REAL array, dimension (max(NN))
 \verbatim
          The generalized eigenvalues of (A,B) computed by SGGEV3.
          ( ALPHAR(k)+ALPHAI(k)*i ) / BETA(k) is the k-th
          generalized eigenvalue of A and B.
[out]ALPHR1
          ALPHR1 is REAL array, dimension (max(NN))
[out]ALPHI1
          ALPHI1 is REAL array, dimension (max(NN))
[out]BETA1
          BETA1 is REAL array, dimension (max(NN))

          Like ALPHAR, ALPHAI, BETA, these arrays contain the
          eigenvalues of A and B, but those computed when SGGEV3 only
          computes a partial eigendecomposition, i.e. not the
          eigenvalues and left and right eigenvectors.
[out]WORK
          WORK is REAL array, dimension (LWORK)
[in]LWORK
          LWORK is INTEGER
          The number of entries in WORK.  LWORK >= MAX( 8*N, N*(N+1) ).
[out]RESULT
          RESULT is REAL array, dimension (2)
          The values computed by the tests described above.
          The values are currently limited to 1/ulp, to avoid overflow.
[out]INFO
          INFO is INTEGER
          = 0:  successful exit
          < 0:  if INFO = -i, the i-th argument had an illegal value.
          > 0:  A routine returned an error code.  INFO is the
                absolute value of the INFO value returned.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date
February 2015

Definition at line 410 of file sdrgev3.f.

410 *
411 * -- LAPACK test routine (version 3.6.1) --
412 * -- LAPACK is a software package provided by Univ. of Tennessee, --
413 * -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
414 * February 2015
415 *
416 * .. Scalar Arguments ..
417  INTEGER info, lda, ldq, ldqe, lwork, nounit, nsizes,
418  $ ntypes
419  REAL thresh
420 * ..
421 * .. Array Arguments ..
422  LOGICAL dotype( * )
423  INTEGER iseed( 4 ), nn( * )
424  REAL a( lda, * ), alphai( * ), alphi1( * ),
425  $ alphar( * ), alphr1( * ), b( lda, * ),
426  $ beta( * ), beta1( * ), q( ldq, * ),
427  $ qe( ldqe, * ), result( * ), s( lda, * ),
428  $ t( lda, * ), work( * ), z( ldq, * )
429 * ..
430 *
431 * =====================================================================
432 *
433 * .. Parameters ..
434  REAL zero, one
435  parameter ( zero = 0.0e+0, one = 1.0e+0 )
436  INTEGER maxtyp
437  parameter ( maxtyp = 26 )
438 * ..
439 * .. Local Scalars ..
440  LOGICAL badnn
441  INTEGER i, iadd, ierr, in, j, jc, jr, jsize, jtype,
442  $ maxwrk, minwrk, mtypes, n, n1, nerrs, nmats,
443  $ nmax, ntestt
444  REAL safmax, safmin, ulp, ulpinv
445 * ..
446 * .. Local Arrays ..
447  INTEGER iasign( maxtyp ), ibsign( maxtyp ),
448  $ ioldsd( 4 ), kadd( 6 ), kamagn( maxtyp ),
449  $ katype( maxtyp ), kazero( maxtyp ),
450  $ kbmagn( maxtyp ), kbtype( maxtyp ),
451  $ kbzero( maxtyp ), kclass( maxtyp ),
452  $ ktrian( maxtyp ), kz1( 6 ), kz2( 6 )
453  REAL rmagn( 0: 3 )
454 * ..
455 * .. External Functions ..
456  INTEGER ilaenv
457  REAL slamch, slarnd
458  EXTERNAL ilaenv, slamch, slarnd
459 * ..
460 * .. External Subroutines ..
461  EXTERNAL alasvm, sget52, sggev3, slabad, slacpy, slarfg,
463 * ..
464 * .. Intrinsic Functions ..
465  INTRINSIC abs, max, min, REAL, sign
466 * ..
467 * .. Data statements ..
468  DATA kclass / 15*1, 10*2, 1*3 /
469  DATA kz1 / 0, 1, 2, 1, 3, 3 /
470  DATA kz2 / 0, 0, 1, 2, 1, 1 /
471  DATA kadd / 0, 0, 0, 0, 3, 2 /
472  DATA katype / 0, 1, 0, 1, 2, 3, 4, 1, 4, 4, 1, 1, 4,
473  $ 4, 4, 2, 4, 5, 8, 7, 9, 4*4, 0 /
474  DATA kbtype / 0, 0, 1, 1, 2, -3, 1, 4, 1, 1, 4, 4,
475  $ 1, 1, -4, 2, -4, 8*8, 0 /
476  DATA kazero / 6*1, 2, 1, 2*2, 2*1, 2*2, 3, 1, 3,
477  $ 4*5, 4*3, 1 /
478  DATA kbzero / 6*1, 1, 2, 2*1, 2*2, 2*1, 4, 1, 4,
479  $ 4*6, 4*4, 1 /
480  DATA kamagn / 8*1, 2, 3, 2, 3, 2, 3, 7*1, 2, 3, 3,
481  $ 2, 1 /
482  DATA kbmagn / 8*1, 3, 2, 3, 2, 2, 3, 7*1, 3, 2, 3,
483  $ 2, 1 /
484  DATA ktrian / 16*0, 10*1 /
485  DATA iasign / 6*0, 2, 0, 2*2, 2*0, 3*2, 0, 2, 3*0,
486  $ 5*2, 0 /
487  DATA ibsign / 7*0, 2, 2*0, 2*2, 2*0, 2, 0, 2, 9*0 /
488 * ..
489 * .. Executable Statements ..
490 *
491 * Check for errors
492 *
493  info = 0
494 *
495  badnn = .false.
496  nmax = 1
497  DO 10 j = 1, nsizes
498  nmax = max( nmax, nn( j ) )
499  IF( nn( j ).LT.0 )
500  $ badnn = .true.
501  10 CONTINUE
502 *
503  IF( nsizes.LT.0 ) THEN
504  info = -1
505  ELSE IF( badnn ) THEN
506  info = -2
507  ELSE IF( ntypes.LT.0 ) THEN
508  info = -3
509  ELSE IF( thresh.LT.zero ) THEN
510  info = -6
511  ELSE IF( lda.LE.1 .OR. lda.LT.nmax ) THEN
512  info = -9
513  ELSE IF( ldq.LE.1 .OR. ldq.LT.nmax ) THEN
514  info = -14
515  ELSE IF( ldqe.LE.1 .OR. ldqe.LT.nmax ) THEN
516  info = -17
517  END IF
518 *
519 * Compute workspace
520 * (Note: Comments in the code beginning "Workspace:" describe the
521 * minimal amount of workspace needed at that point in the code,
522 * as well as the preferred amount for good performance.
523 * NB refers to the optimal block size for the immediately
524 * following subroutine, as returned by ILAENV.
525 *
526  minwrk = 1
527  IF( info.EQ.0 .AND. lwork.GE.1 ) THEN
528  minwrk = max( 1, 8*nmax, nmax*( nmax+1 ) )
529  maxwrk = 7*nmax + nmax*ilaenv( 1, 'SGEQRF', ' ', nmax, 1, nmax,
530  $ 0 )
531  maxwrk = max( maxwrk, nmax*( nmax+1 ) )
532  work( 1 ) = maxwrk
533  END IF
534 *
535  IF( lwork.LT.minwrk )
536  $ info = -25
537 *
538  IF( info.NE.0 ) THEN
539  CALL xerbla( 'SDRGEV3', -info )
540  RETURN
541  END IF
542 *
543 * Quick return if possible
544 *
545  IF( nsizes.EQ.0 .OR. ntypes.EQ.0 )
546  $ RETURN
547 *
548  safmin = slamch( 'Safe minimum' )
549  ulp = slamch( 'Epsilon' )*slamch( 'Base' )
550  safmin = safmin / ulp
551  safmax = one / safmin
552  CALL slabad( safmin, safmax )
553  ulpinv = one / ulp
554 *
555 * The values RMAGN(2:3) depend on N, see below.
556 *
557  rmagn( 0 ) = zero
558  rmagn( 1 ) = one
559 *
560 * Loop over sizes, types
561 *
562  ntestt = 0
563  nerrs = 0
564  nmats = 0
565 *
566  DO 220 jsize = 1, nsizes
567  n = nn( jsize )
568  n1 = max( 1, n )
569  rmagn( 2 ) = safmax*ulp / REAL( n1 )
570  rmagn( 3 ) = safmin*ulpinv*n1
571 *
572  IF( nsizes.NE.1 ) THEN
573  mtypes = min( maxtyp, ntypes )
574  ELSE
575  mtypes = min( maxtyp+1, ntypes )
576  END IF
577 *
578  DO 210 jtype = 1, mtypes
579  IF( .NOT.dotype( jtype ) )
580  $ GO TO 210
581  nmats = nmats + 1
582 *
583 * Save ISEED in case of an error.
584 *
585  DO 20 j = 1, 4
586  ioldsd( j ) = iseed( j )
587  20 CONTINUE
588 *
589 * Generate test matrices A and B
590 *
591 * Description of control parameters:
592 *
593 * KCLASS: =1 means w/o rotation, =2 means w/ rotation,
594 * =3 means random.
595 * KATYPE: the "type" to be passed to SLATM4 for computing A.
596 * KAZERO: the pattern of zeros on the diagonal for A:
597 * =1: ( xxx ), =2: (0, xxx ) =3: ( 0, 0, xxx, 0 ),
598 * =4: ( 0, xxx, 0, 0 ), =5: ( 0, 0, 1, xxx, 0 ),
599 * =6: ( 0, 1, 0, xxx, 0 ). (xxx means a string of
600 * non-zero entries.)
601 * KAMAGN: the magnitude of the matrix: =0: zero, =1: O(1),
602 * =2: large, =3: small.
603 * IASIGN: 1 if the diagonal elements of A are to be
604 * multiplied by a random magnitude 1 number, =2 if
605 * randomly chosen diagonal blocks are to be rotated
606 * to form 2x2 blocks.
607 * KBTYPE, KBZERO, KBMAGN, IBSIGN: the same, but for B.
608 * KTRIAN: =0: don't fill in the upper triangle, =1: do.
609 * KZ1, KZ2, KADD: used to implement KAZERO and KBZERO.
610 * RMAGN: used to implement KAMAGN and KBMAGN.
611 *
612  IF( mtypes.GT.maxtyp )
613  $ GO TO 100
614  ierr = 0
615  IF( kclass( jtype ).LT.3 ) THEN
616 *
617 * Generate A (w/o rotation)
618 *
619  IF( abs( katype( jtype ) ).EQ.3 ) THEN
620  in = 2*( ( n-1 ) / 2 ) + 1
621  IF( in.NE.n )
622  $ CALL slaset( 'Full', n, n, zero, zero, a, lda )
623  ELSE
624  in = n
625  END IF
626  CALL slatm4( katype( jtype ), in, kz1( kazero( jtype ) ),
627  $ kz2( kazero( jtype ) ), iasign( jtype ),
628  $ rmagn( kamagn( jtype ) ), ulp,
629  $ rmagn( ktrian( jtype )*kamagn( jtype ) ), 2,
630  $ iseed, a, lda )
631  iadd = kadd( kazero( jtype ) )
632  IF( iadd.GT.0 .AND. iadd.LE.n )
633  $ a( iadd, iadd ) = one
634 *
635 * Generate B (w/o rotation)
636 *
637  IF( abs( kbtype( jtype ) ).EQ.3 ) THEN
638  in = 2*( ( n-1 ) / 2 ) + 1
639  IF( in.NE.n )
640  $ CALL slaset( 'Full', n, n, zero, zero, b, lda )
641  ELSE
642  in = n
643  END IF
644  CALL slatm4( kbtype( jtype ), in, kz1( kbzero( jtype ) ),
645  $ kz2( kbzero( jtype ) ), ibsign( jtype ),
646  $ rmagn( kbmagn( jtype ) ), one,
647  $ rmagn( ktrian( jtype )*kbmagn( jtype ) ), 2,
648  $ iseed, b, lda )
649  iadd = kadd( kbzero( jtype ) )
650  IF( iadd.NE.0 .AND. iadd.LE.n )
651  $ b( iadd, iadd ) = one
652 *
653  IF( kclass( jtype ).EQ.2 .AND. n.GT.0 ) THEN
654 *
655 * Include rotations
656 *
657 * Generate Q, Z as Householder transformations times
658 * a diagonal matrix.
659 *
660  DO 40 jc = 1, n - 1
661  DO 30 jr = jc, n
662  q( jr, jc ) = slarnd( 3, iseed )
663  z( jr, jc ) = slarnd( 3, iseed )
664  30 CONTINUE
665  CALL slarfg( n+1-jc, q( jc, jc ), q( jc+1, jc ), 1,
666  $ work( jc ) )
667  work( 2*n+jc ) = sign( one, q( jc, jc ) )
668  q( jc, jc ) = one
669  CALL slarfg( n+1-jc, z( jc, jc ), z( jc+1, jc ), 1,
670  $ work( n+jc ) )
671  work( 3*n+jc ) = sign( one, z( jc, jc ) )
672  z( jc, jc ) = one
673  40 CONTINUE
674  q( n, n ) = one
675  work( n ) = zero
676  work( 3*n ) = sign( one, slarnd( 2, iseed ) )
677  z( n, n ) = one
678  work( 2*n ) = zero
679  work( 4*n ) = sign( one, slarnd( 2, iseed ) )
680 *
681 * Apply the diagonal matrices
682 *
683  DO 60 jc = 1, n
684  DO 50 jr = 1, n
685  a( jr, jc ) = work( 2*n+jr )*work( 3*n+jc )*
686  $ a( jr, jc )
687  b( jr, jc ) = work( 2*n+jr )*work( 3*n+jc )*
688  $ b( jr, jc )
689  50 CONTINUE
690  60 CONTINUE
691  CALL sorm2r( 'L', 'N', n, n, n-1, q, ldq, work, a,
692  $ lda, work( 2*n+1 ), ierr )
693  IF( ierr.NE.0 )
694  $ GO TO 90
695  CALL sorm2r( 'R', 'T', n, n, n-1, z, ldq, work( n+1 ),
696  $ a, lda, work( 2*n+1 ), ierr )
697  IF( ierr.NE.0 )
698  $ GO TO 90
699  CALL sorm2r( 'L', 'N', n, n, n-1, q, ldq, work, b,
700  $ lda, work( 2*n+1 ), ierr )
701  IF( ierr.NE.0 )
702  $ GO TO 90
703  CALL sorm2r( 'R', 'T', n, n, n-1, z, ldq, work( n+1 ),
704  $ b, lda, work( 2*n+1 ), ierr )
705  IF( ierr.NE.0 )
706  $ GO TO 90
707  END IF
708  ELSE
709 *
710 * Random matrices
711 *
712  DO 80 jc = 1, n
713  DO 70 jr = 1, n
714  a( jr, jc ) = rmagn( kamagn( jtype ) )*
715  $ slarnd( 2, iseed )
716  b( jr, jc ) = rmagn( kbmagn( jtype ) )*
717  $ slarnd( 2, iseed )
718  70 CONTINUE
719  80 CONTINUE
720  END IF
721 *
722  90 CONTINUE
723 *
724  IF( ierr.NE.0 ) THEN
725  WRITE( nounit, fmt = 9999 )'Generator', ierr, n, jtype,
726  $ ioldsd
727  info = abs( ierr )
728  RETURN
729  END IF
730 *
731  100 CONTINUE
732 *
733  DO 110 i = 1, 7
734  result( i ) = -one
735  110 CONTINUE
736 *
737 * Call SGGEV3 to compute eigenvalues and eigenvectors.
738 *
739  CALL slacpy( ' ', n, n, a, lda, s, lda )
740  CALL slacpy( ' ', n, n, b, lda, t, lda )
741  CALL sggev3( 'V', 'V', n, s, lda, t, lda, alphar, alphai,
742  $ beta, q, ldq, z, ldq, work, lwork, ierr )
743  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
744  result( 1 ) = ulpinv
745  WRITE( nounit, fmt = 9999 )'SGGEV31', ierr, n, jtype,
746  $ ioldsd
747  info = abs( ierr )
748  GO TO 190
749  END IF
750 *
751 * Do the tests (1) and (2)
752 *
753  CALL sget52( .true., n, a, lda, b, lda, q, ldq, alphar,
754  $ alphai, beta, work, result( 1 ) )
755  IF( result( 2 ).GT.thresh ) THEN
756  WRITE( nounit, fmt = 9998 )'Left', 'SGGEV31',
757  $ result( 2 ), n, jtype, ioldsd
758  END IF
759 *
760 * Do the tests (3) and (4)
761 *
762  CALL sget52( .false., n, a, lda, b, lda, z, ldq, alphar,
763  $ alphai, beta, work, result( 3 ) )
764  IF( result( 4 ).GT.thresh ) THEN
765  WRITE( nounit, fmt = 9998 )'Right', 'SGGEV31',
766  $ result( 4 ), n, jtype, ioldsd
767  END IF
768 *
769 * Do the test (5)
770 *
771  CALL slacpy( ' ', n, n, a, lda, s, lda )
772  CALL slacpy( ' ', n, n, b, lda, t, lda )
773  CALL sggev3( 'N', 'N', n, s, lda, t, lda, alphr1, alphi1,
774  $ beta1, q, ldq, z, ldq, work, lwork, ierr )
775  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
776  result( 1 ) = ulpinv
777  WRITE( nounit, fmt = 9999 )'SGGEV32', ierr, n, jtype,
778  $ ioldsd
779  info = abs( ierr )
780  GO TO 190
781  END IF
782 *
783  DO 120 j = 1, n
784  IF( alphar( j ).NE.alphr1( j ) .OR.
785  $ beta( j ).NE. beta1( j ) ) THEN
786  result( 5 ) = ulpinv
787  END IF
788  120 CONTINUE
789 *
790 * Do the test (6): Compute eigenvalues and left eigenvectors,
791 * and test them
792 *
793  CALL slacpy( ' ', n, n, a, lda, s, lda )
794  CALL slacpy( ' ', n, n, b, lda, t, lda )
795  CALL sggev3( 'V', 'N', n, s, lda, t, lda, alphr1, alphi1,
796  $ beta1, qe, ldqe, z, ldq, work, lwork, ierr )
797  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
798  result( 1 ) = ulpinv
799  WRITE( nounit, fmt = 9999 )'SGGEV33', ierr, n, jtype,
800  $ ioldsd
801  info = abs( ierr )
802  GO TO 190
803  END IF
804 *
805  DO 130 j = 1, n
806  IF( alphar( j ).NE.alphr1( j ) .OR. alphai( j ).NE.
807  $ alphi1( j ) .OR. beta( j ).NE.beta1( j ) )
808  $ result( 6 ) = ulpinv
809  130 CONTINUE
810 *
811  DO 150 j = 1, n
812  DO 140 jc = 1, n
813  IF( q( j, jc ).NE.qe( j, jc ) )
814  $ result( 6 ) = ulpinv
815  140 CONTINUE
816  150 CONTINUE
817 *
818 * DO the test (7): Compute eigenvalues and right eigenvectors,
819 * and test them
820 *
821  CALL slacpy( ' ', n, n, a, lda, s, lda )
822  CALL slacpy( ' ', n, n, b, lda, t, lda )
823  CALL sggev3( 'N', 'V', n, s, lda, t, lda, alphr1, alphi1,
824  $ beta1, q, ldq, qe, ldqe, work, lwork, ierr )
825  IF( ierr.NE.0 .AND. ierr.NE.n+1 ) THEN
826  result( 1 ) = ulpinv
827  WRITE( nounit, fmt = 9999 )'SGGEV34', ierr, n, jtype,
828  $ ioldsd
829  info = abs( ierr )
830  GO TO 190
831  END IF
832 *
833  DO 160 j = 1, n
834  IF( alphar( j ).NE.alphr1( j ) .OR. alphai( j ).NE.
835  $ alphi1( j ) .OR. beta( j ).NE.beta1( j ) )
836  $ result( 7 ) = ulpinv
837  160 CONTINUE
838 *
839  DO 180 j = 1, n
840  DO 170 jc = 1, n
841  IF( z( j, jc ).NE.qe( j, jc ) )
842  $ result( 7 ) = ulpinv
843  170 CONTINUE
844  180 CONTINUE
845 *
846 * End of Loop -- Check for RESULT(j) > THRESH
847 *
848  190 CONTINUE
849 *
850  ntestt = ntestt + 7
851 *
852 * Print out tests which fail.
853 *
854  DO 200 jr = 1, 7
855  IF( result( jr ).GE.thresh ) THEN
856 *
857 * If this is the first test to fail,
858 * print a header to the data file.
859 *
860  IF( nerrs.EQ.0 ) THEN
861  WRITE( nounit, fmt = 9997 )'SGV'
862 *
863 * Matrix types
864 *
865  WRITE( nounit, fmt = 9996 )
866  WRITE( nounit, fmt = 9995 )
867  WRITE( nounit, fmt = 9994 )'Orthogonal'
868 *
869 * Tests performed
870 *
871  WRITE( nounit, fmt = 9993 )
872 *
873  END IF
874  nerrs = nerrs + 1
875  IF( result( jr ).LT.10000.0 ) THEN
876  WRITE( nounit, fmt = 9992 )n, jtype, ioldsd, jr,
877  $ result( jr )
878  ELSE
879  WRITE( nounit, fmt = 9991 )n, jtype, ioldsd, jr,
880  $ result( jr )
881  END IF
882  END IF
883  200 CONTINUE
884 *
885  210 CONTINUE
886  220 CONTINUE
887 *
888 * Summary
889 *
890  CALL alasvm( 'SGV', nounit, nerrs, ntestt, 0 )
891 *
892  work( 1 ) = maxwrk
893 *
894  RETURN
895 *
896  9999 FORMAT( ' SDRGEV3: ', a, ' returned INFO=', i6, '.', / 3x, 'N=',
897  $ i6, ', JTYPE=', i6, ', ISEED=(', 4( i4, ',' ), i5, ')' )
898 *
899  9998 FORMAT( ' SDRGEV3: ', a, ' Eigenvectors from ', a,
900  $ ' incorrectly normalized.', / ' Bits of error=', 0p, g10.3,
901  $ ',', 3x, 'N=', i4, ', JTYPE=', i3, ', ISEED=(',
902  $ 4( i4, ',' ), i5, ')' )
903 *
904  9997 FORMAT( / 1x, a3, ' -- Real Generalized eigenvalue problem driver'
905  $ )
906 *
907  9996 FORMAT( ' Matrix types (see SDRGEV3 for details): ' )
908 *
909  9995 FORMAT( ' Special Matrices:', 23x,
910  $ '(J''=transposed Jordan block)',
911  $ / ' 1=(0,0) 2=(I,0) 3=(0,I) 4=(I,I) 5=(J'',J'') ',
912  $ '6=(diag(J'',I), diag(I,J''))', / ' Diagonal Matrices: ( ',
913  $ 'D=diag(0,1,2,...) )', / ' 7=(D,I) 9=(large*D, small*I',
914  $ ') 11=(large*I, small*D) 13=(large*D, large*I)', /
915  $ ' 8=(I,D) 10=(small*D, large*I) 12=(small*I, large*D) ',
916  $ ' 14=(small*D, small*I)', / ' 15=(D, reversed D)' )
917  9994 FORMAT( ' Matrices Rotated by Random ', a, ' Matrices U, V:',
918  $ / ' 16=Transposed Jordan Blocks 19=geometric ',
919  $ 'alpha, beta=0,1', / ' 17=arithm. alpha&beta ',
920  $ ' 20=arithmetic alpha, beta=0,1', / ' 18=clustered ',
921  $ 'alpha, beta=0,1 21=random alpha, beta=0,1',
922  $ / ' Large & Small Matrices:', / ' 22=(large, small) ',
923  $ '23=(small,large) 24=(small,small) 25=(large,large)',
924  $ / ' 26=random O(1) matrices.' )
925 *
926  9993 FORMAT( / ' Tests performed: ',
927  $ / ' 1 = max | ( b A - a B )''*l | / const.,',
928  $ / ' 2 = | |VR(i)| - 1 | / ulp,',
929  $ / ' 3 = max | ( b A - a B )*r | / const.',
930  $ / ' 4 = | |VL(i)| - 1 | / ulp,',
931  $ / ' 5 = 0 if W same no matter if r or l computed,',
932  $ / ' 6 = 0 if l same no matter if l computed,',
933  $ / ' 7 = 0 if r same no matter if r computed,', / 1x )
934  9992 FORMAT( ' Matrix order=', i5, ', type=', i2, ', seed=',
935  $ 4( i4, ',' ), ' result ', i2, ' is', 0p, f8.2 )
936  9991 FORMAT( ' Matrix order=', i5, ', type=', i2, ', seed=',
937  $ 4( i4, ',' ), ' result ', i2, ' is', 1p, e10.3 )
938 *
939 * End of SDRGEV3
940 *
subroutine alasvm(TYPE, NOUT, NFAIL, NRUN, NERRS)
ALASVM
Definition: alasvm.f:75
subroutine slatm4(ITYPE, N, NZ1, NZ2, ISIGN, AMAGN, RCOND, TRIANG, IDIST, ISEED, A, LDA)
SLATM4
Definition: slatm4.f:177
subroutine slarfg(N, ALPHA, X, INCX, TAU)
SLARFG generates an elementary reflector (Householder matrix).
Definition: slarfg.f:108
subroutine slabad(SMALL, LARGE)
SLABAD
Definition: slabad.f:76
subroutine sggev3(JOBVL, JOBVR, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VL, LDVL, VR, LDVR, WORK, LWORK, INFO)
SGGEV3 computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices ...
Definition: sggev3.f:228
subroutine xerbla(SRNAME, INFO)
XERBLA
Definition: xerbla.f:62
subroutine slacpy(UPLO, M, N, A, LDA, B, LDB)
SLACPY copies all or part of one two-dimensional array to another.
Definition: slacpy.f:105
subroutine slaset(UPLO, M, N, ALPHA, BETA, A, LDA)
SLASET initializes the off-diagonal elements and the diagonal elements of a matrix to given values...
Definition: slaset.f:112
real function slarnd(IDIST, ISEED)
SLARND
Definition: slarnd.f:75
subroutine sorm2r(SIDE, TRANS, M, N, K, A, LDA, TAU, C, LDC, WORK, INFO)
SORM2R multiplies a general matrix by the orthogonal matrix from a QR factorization determined by sge...
Definition: sorm2r.f:161
integer function ilaenv(ISPEC, NAME, OPTS, N1, N2, N3, N4)
Definition: tstiee.f:83
real function slamch(CMACH)
SLAMCH
Definition: slamch.f:69
subroutine sget52(LEFT, N, A, LDA, B, LDB, E, LDE, ALPHAR, ALPHAI, BETA, WORK, RESULT)
SGET52
Definition: sget52.f:201

Here is the call graph for this function:

Here is the caller graph for this function: