WWW Statistics for ScaLAPACK
A new visits is defined as each new incoming visitor (viewing or browsing a page) who was not connected to your site during last 60 mn.
Number of client hosts (IP address) who came to visit the site (and who viewed at least one page).
This data refers to the number of different physical persons who had reached the site.
Number of times a page of the site is viewed (Sum for all visitors for all visits).
This piece of data differs from "hits" in that it counts only HTML pages as oppose to images and other files.
Number of times a page, image, file of the site is viewed or downloaded by someone.
This piece of data is provided as a reference only, since the number of "pages" viewed is often prefered for marketing purposes.
This piece of information refers to the amount of data downloaded by all pages, images and files within your site.
Units are in KB, MB or GB (KiloBytes, MegaBytes or GigaBytes)
Awstats recognizes each access to your site after a search from the 228 most popular Internet Search Engines and Directories (such as Yahoo, Altavista, Lycos, Google, Voila, etc...).
List of all external pages which were used to link (and enter) to your site (Only the 10 most often used external pages are shown).
Links used by the results of the search engines are excluded here because they have already been included on the previous line within this table.
This table shows the list of the most frequent keyphrases or keywords used to find your site from Internet Search Engines and Directories.
(Keywords from the 228 most popular Search Engines and Directories are recognized by Awstats, such as Yahoo, Altavista, Lycos, Google, Voila, etc...).
Note that total number of searches for keywords might be greater than total number of searches for keyphrases (real number of searches) because when 2 keywords were used on same search, search is counted twice for keywords (once for each word).
Robots (sometimes refer to Spiders) are automatic computer visitors used by many search engines that scan your web site to index it and rank it, collect statistics on Internet Web sites and/or see if your site is still online.
Awstats is able to recognize up to 643 robots.
All time related statistics are based on server time.
Here, reported data are: average values (calculated from all data between the first and last visit in analyzed range).
Here, reported data are: cumulative sums (calculated from all data between the first and last visit in analyzed range).
Some Visits durations are 'unknown' because they can't always be calculated. This is the major reason for this:
- Visit was not finished when 'update' occured.
- Visit started the last hour (after 23:00) of the last day of a month (A technical reason prevents Awstats from calculating duration of such sessions)
Worms are automatic computer visitors that are in fact external servers, infected by a virus, that try
to make particular hits on your server to infect it. In most cases, such worms exploit some bugs of not up to date
or commercial servers. If your system is not the sensitive target of the worm, you can simply ignore those hits.
There is very few 'server worms' in the world but they are very active at some times.
Awstats is able to recognize 0 known worm's signatures (nimda,code red,...).
No description for this error.
Request was understood by server but will be processed later.
Server has processed the request but there is no document to send.
Partial content.
Requested document was moved and is now at another address given in answer.
No description for this error.
Syntax error, server didn't understand request.
Tried to reach an URL where a login/password pair was required.
A high number within this item could mean that someone (such as a hacker) is attempting to crack, or enter into your site (hoping to enter a secured area by trying different login/password pairs, for instance).
Tried to reach an URL not configured to be reachable, even with an login/password pair (for example, an URL within a directory not defined as "browsable".).
Tried to reach a non existing URL. This error often means that there is an invalid link somewhere in your site or that a visitor mistyped a certain URL.
Server has taken too much time to respond to a request. This error frequently involves either a slow CGI script which the server was required to kill or an extremely congested web server.
Internal error. This error is often caused by a CGI program that had finished abnormally (coredump for example).
Unknown requested action.
Code returned by a HTTP server that works as a proxy or gateway when a real, targeted server doesn't answer successfully to the client's request.
Internal server error.
Gateway Time-out.
HTTP Version Not Supported.
| Keyphrases used on search engines | |
| 293 different keyphrases | Search | Percent |
|---|
| scalapack | 149 | 28 % |
| pblas | 12 | 2.2 % |
| numroc | 8 | 1.5 % |
| scalapack tutorial | 5 | 0.9 % |
| descinit | 4 | 0.7 % |
| scalapack example | 4 | 0.7 % |
| pdelset | 4 | 0.7 % |
| parallel efficiency | 4 | 0.7 % |
| pdsyevd | 4 | 0.7 % |
| pdelget | 4 | 0.7 % |
| scalapack numroc | 3 | 0.5 % |
| grid size | 3 | 0.5 % |
| psgels scalapack | 3 | 0.5 % |
| scalapack installer | 3 | 0.5 % |
| iceil | 3 | 0.5 % |
| sparse lapack | 3 | 0.5 % |
| descb | 3 | 0.5 % |
| scalapack users guide | 3 | 0.5 % |
| netlib scalapack | 3 | 0.5 % |
| error norms | 3 | 0.5 % |
| sparse scalapack | 2 | 0.3 % |
| scalapack c | 2 | 0.3 % |
| scalapack eigenvalue | 2 | 0.3 % |
| scalapack least squares algorithm | 2 | 0.3 % |
| pdstein.f | 2 | 0.3 % |
| pdsygvx | 2 | 0.3 % |
| pdsyevx | 2 | 0.3 % |
| hessenberg form lu | 2 | 0.3 % |
| pdlawrite | 2 | 0.3 % |
| cpdgemr2d | 2 | 0.3 % |
| pdstedc | 2 | 0.3 % |
| pdgemr2d | 2 | 0.3 % |
| 2x p 5 cl 75 dr 36 vd 45 hu 53 sa | 2 | 0.3 % |
| pdlapiv | 2 | 0.3 % |
| scalapack svd | 2 | 0.3 % |
| pzhegvx | 2 | 0.3 % |
| scalapack test | 2 | 0.3 % |
| pblas example | 2 | 0.3 % |
| pzgemm input arguments | 2 | 0.3 % |
| sl_init | 2 | 0.3 % |
| debian scalapack test | 2 | 0.3 % |
| scalapack sl_init | 2 | 0.3 % |
| scalapack user s guide | 2 | 0.3 % |
| scalapack performance numbers | 2 | 0.3 % |
| errors in numerical calculations | 2 | 0.3 % |
| pdlaread | 2 | 0.3 % |
| pdlacpy | 2 | 0.3 % |
| row blocks | 2 | 0.3 % |
| lapack parallel | 2 | 0.3 % |
| unitary matrix example | 2 | 0.3 % |
| pdormtr | 2 | 0.3 % |
| pdsygst.f | 1 | 0.1 % |
| dger dgemm dtrsm | 1 | 0.1 % |
| pdgesv | 1 | 0.1 % |
| how run program in mpi | 1 | 0.1 % |
| where to zero a scope in knoxville | 1 | 0.1 % |
| pzelget | 1 | 0.1 % |
| xsteqr routine | 1 | 0.1 % |
| lapack totorial | 1 | 0.1 % |
| pdstedc driver | 1 | 0.1 % |
| salapack | 1 | 0.1 % |
| indxg2p | 1 | 0.1 % |
| pzelset example | 1 | 0.1 % |
| scalapack lapack | 1 | 0.1 % |
| qr matrix inverse | 1 | 0.1 % |
| scalapack srcflag | 1 | 0.1 % |
| svd scalpack | 1 | 0.1 % |
| scalapack for windows | 1 | 0.1 % |
| direct sparse | 1 | 0.1 % |
| how to measure errors | 1 | 0.1 % |
| precision errors rounding cancellation underflow overflow | 1 | 0.1 % |
| tridiagonal matrix algorithm | 1 | 0.1 % |
| lapack sparse iterative solvers | 1 | 0.1 % |
| parallel matrix package | 1 | 0.1 % |
| condition upper hessenberg | 1 | 0.1 % |
| linear least squares problem | 1 | 0.1 % |
| pbsblas | 1 | 0.1 % |
| matrix dot product scalapack | 1 | 0.1 % |
| pdgesv scalapack | 1 | 0.1 % |
| block-cyclic | 1 | 0.1 % |
| pdsyev | 1 | 0.1 % |
| accuracy vs stability numerical | 1 | 0.1 % |
| bidiagonalform | 1 | 0.1 % |
| library fortran sparse lapack | 1 | 0.1 % |
| pdgeqrf | 1 | 0.1 % |
| test suite for gunzip | 1 | 0.1 % |
| storage band matrix | 1 | 0.1 % |
| 89 mk 56 dh 89 wq 78 qu 98 fr maps | 1 | 0.1 % |
| lapack and scalapack | 1 | 0.1 % |
| execute mpi programs | 1 | 0.1 % |
| qr algorithmus tridiagonal | 1 | 0.1 % |
| indxg2l | 1 | 0.1 % |
| scalapck | 1 | 0.1 % |
| superlu | 1 | 0.1 % |
| how to run mpi program | 1 | 0.1 % |
| mapingas blockai | 1 | 0.1 % |
| scalapack downlod | 1 | 0.1 % |
| hermitian matrix tridiagonal | 1 | 0.1 % |
| blacs source code | 1 | 0.1 % |
| scalapack matrix multiplication | 1 | 0.1 % |
| lu symmetric matrix | 1 | 0.1 % |
| alignment restriction | 1 | 0.1 % |
| sub_pc_type | 1 | 0.1 % |
| pblas c | 1 | 0.1 % |
| sclapack | 1 | 0.1 % |
| error norm | 1 | 0.1 % |
| pzelset.f | 1 | 0.1 % |
| blacs sl_init | 1 | 0.1 % |
| parallel blas | 1 | 0.1 % |
| cyclic block distribution | 1 | 0.1 % |
| parallel efficiency scalability | 1 | 0.1 % |
| parallel lapack c | 1 | 0.1 % |
| cost of asci red | 1 | 0.1 % |
| sizeto grid | 1 | 0.1 % |
| jugnj | 1 | 0.1 % |
| scalapack visual studio | 1 | 0.1 % |
| pzgesv | 1 | 0.1 % |
| pcheevx.f | 1 | 0.1 % |
| d&p h8 informatii | 1 | 0.1 % |
| lu algorithm for tridiagonal matrix | 1 | 0.1 % |
| scalapac | 1 | 0.1 % |
| run mpi program | 1 | 0.1 % |
| block cyclic distribution | 1 | 0.1 % |
| lapack sparse | 1 | 0.1 % |
| reshape c | 1 | 0.1 % |
| 888\]u 7 ]y[=i7] j\6u] j64 aj | 1 | 0.1 % |
| n k jn | 1 | 0.1 % |
| scalapack pblas c | 1 | 0.1 % |
| o n execution time | 1 | 0.1 % |
| calling scalapack routines in c interface | 1 | 0.1 % |
| blacs gridexit c | 1 | 0.1 % |
| jvc td w 111 bk | 1 | 0.1 % |
| libmpi.a is missing | 1 | 0.1 % |
| lu factorization diagonal dominant | 1 | 0.1 % |
| heterogeneous networks | 1 | 0.1 % |
| prototype software | 1 | 0.1 % |
| hierarchy memory | 1 | 0.1 % |
| blas library | 1 | 0.1 % |
| scalapack least squares | 1 | 0.1 % |
| qr with column pivoting | 1 | 0.1 % |
| numroc_ | 1 | 0.1 % |
| in example | 1 | 0.1 % |
| netlib pblas | 1 | 0.1 % |
| scalapack pdelget | 1 | 0.1 % |
| netlib tutorial | 1 | 0.1 % |
| array descriptor | 1 | 0.1 % |
| how to gzip a tar file | 1 | 0.1 % |
| netlib scalapack example1.f | 1 | 0.1 % |
| pvlas | 1 | 0.1 % |
| minimum norm solution svd | 1 | 0.1 % |
| blas mpi | 1 | 0.1 % |
| how to calculate parallel efficiency in teradata | 1 | 0.1 % |
| scalapack routines | 1 | 0.1 % |
| relative precision of the machine | 1 | 0.1 % |
| on entry to pdgels parameter number 6 had an illegal value | 1 | 0.1 % |
| c interface to scalapack | 1 | 0.1 % |
| scalapack subroutines | 1 | 0.1 % |
| pdlarfb | 1 | 0.1 % |
| rq factorization | 1 | 0.1 % |
| matrix absolute error bounds | 1 | 0.1 % |
| process grid | 1 | 0.1 % |
| lower-packed matrix submatrix | 1 | 0.1 % |
| example pdlawrite | 1 | 0.1 % |
| calculating overall efficiency in a parallel | 1 | 0.1 % |
| fortran interface | 1 | 0.1 % |
| zgebs2d | 1 | 0.1 % |
| pdgesv scalapack documentation | 1 | 0.1 % |
| pzheevd | 1 | 0.1 % |
| pdmatadd | 1 | 0.1 % |
| how to configure scalapack | 1 | 0.1 % |
| cslapack | 1 | 0.1 % |
| scalapack license | 1 | 0.1 % |
| pcheevx | 1 | 0.1 % |
| igerv2d_ | 1 | 0.1 % |
| scalapack install.pdf | 1 | 0.1 % |
| block cyclic array of global dimension n n | 1 | 0.1 % |
| out of core performance | 1 | 0.1 % |
| mpi parameter#sclient=psy | 1 | 0.1 % |
| global integer. the row and column indices in the global array a indicating the first row and the first column of the submatrix a respectively. | 1 | 0.1 % |
| sparse gaussian elimination | 1 | 0.1 % |
| installer scalapack | 1 | 0.1 % |
| absolute error computed function | 1 | 0.1 % |
| pblas download | 1 | 0.1 % |
| what is a small standard error | 1 | 0.1 % |
| blas installer | 1 | 0.1 % |
| scalapack irregular distributed matrix | 1 | 0.1 % |
| pblas error parameter number | 1 | 0.1 % |
| run mpi -n | 1 | 0.1 % |
| frobenius norm matrix example | 1 | 0.1 % |
| scalapack user guide | 1 | 0.1 % |
| 2-d block cyclic lu | 1 | 0.1 % |
| array aa 4 | 1 | 0.1 % |
| block-cyclic distribution | 1 | 0.1 % |
| scalapack driver | 1 | 0.1 % |
| tuning of distributor and point | 1 | 0.1 % |
| lubskb lapack parallel | 1 | 0.1 % |
| pzstein | 1 | 0.1 % |
| netlib parallel scalapack tennessee | 1 | 0.1 % |
| lapack scalapack | 1 | 0.1 % |
| distribute block cyclic | 1 | 0.1 % |
| gunzip a tgz file | 1 | 0.1 % |
| difference between orthogonal and unitary matrix | 1 | 0.1 % |
| scalpick routines | 1 | 0.1 % |
| pzhegvx.f | 1 | 0.1 % |
| how to measure error | 1 | 0.1 % |
| lwork | 1 | 0.1 % |
| scalapack documentation | 1 | 0.1 % |
| scalapack descinit | 1 | 0.1 % |
| installment plan | 1 | 0.1 % |
| parallel lu factorization | 1 | 0.1 % |
| http //www.`2dd vc nmn m9.org/ | 1 | 0.1 % |
| cdefs scalapack | 1 | 0.1 % |
| direct sparse solver | 1 | 0.1 % |
| parallel lu cholesky | 1 | 0.1 % |
| single index transformation | 1 | 0.1 % |
| efficiency of parallelization | 1 | 0.1 % |
| http //www.netlib.org/blas/blas.shar | 1 | 0.1 % |
| how debug application | 1 | 0.1 % |
| netlib parallel | 1 | 0.1 % |
| scalapack vs atlas vs blas | 1 | 0.1 % |
| netlib archive | 1 | 0.1 % |
| scalapack mpi | 1 | 0.1 % |
| acml scalapack threading single | 1 | 0.1 % |
| ctoc jaybee | 1 | 0.1 % |
| qr column pivoting | 1 | 0.1 % |
| lu decomposition of a general band matrix | 1 | 0.1 % |
| pdgemm vs. pdgemv | 1 | 0.1 % |
| measuring errors | 1 | 0.1 % |
| scalapack inverse matrix | 1 | 0.1 % |
| blacs_pinfo | 1 | 0.1 % |
| pzgesv scalapack | 1 | 0.1 % |
| blacs gridinfo c | 1 | 0.1 % |
| how cyclic one dimensional data distribution work? | 1 | 0.1 % |
| aqe elo 5u 5 h ed yt etg y | 1 | 0.1 % |
| estimated execution time | 1 | 0.1 % |
| 4d1358a3 | 1 | 0.1 % |
| core 1 distribute and solve 3 | 1 | 0.1 % |
| bidiagonal form in matlab | 1 | 0.1 % |
| lapack mpi | 1 | 0.1 % |
| tridiagonal matrix | 1 | 0.1 % |
| pbtools | 1 | 0.1 % |
| www.mbc.net/mydist | 1 | 0.1 % |
| scalapack deadlock pdsyev | 1 | 0.1 % |
| simple scalapack example | 1 | 0.1 % |
| minimum norm least squares problem | 1 | 0.1 % |
| schur factorization | 1 | 0.1 % |
| pdsyevx trying diagonalization with large cluster size | 1 | 0.1 % |
| what is diffination of error bound | 1 | 0.1 % |
| example program | 1 | 0.1 % |
| gunzip tgz | 1 | 0.1 % |
| pdgetrf | 1 | 0.1 % |
| error 1105 global array 0 | 1 | 0.1 % |
| svd 1.8.0 | 1 | 0.1 % |
| scalapack testing | 1 | 0.1 % |
| band matrix storage | 1 | 0.1 % |
| crot_ scalapack | 1 | 0.1 % |
| how to execute mpi program | 1 | 0.1 % |
| scaclapack blacs compile order | 1 | 0.1 % |
| banded qr factorization | 1 | 0.1 % |
| read file and distribute scalapack | 1 | 0.1 % |
| matinit | 1 | 0.1 % |
| cpu efficiency parallel definition | 1 | 0.1 % |
| download scalapack | 1 | 0.1 % |
| scalapack pdelset | 1 | 0.1 % |
| pdgetrs | 1 | 0.1 % |
| what is homogeneous network | 1 | 0.1 % |
| parallel efficiency function | 1 | 0.1 % |
| multiplication roundoff error | 1 | 0.1 % |
| pdlaprnt | 1 | 0.1 % |
| norm error | 1 | 0.1 % |
| test svd | 1 | 0.1 % |
| software prototype | 1 | 0.1 % |
| matrix multiply scalapack | 1 | 0.1 % |
| pdsyevx.f | 1 | 0.1 % |
| scalapack library | 1 | 0.1 % |
| scalapack standard block cyclic array | 1 | 0.1 % |
| scalapack dgetrf | 1 | 0.1 % |
| 1.g t. yt 5 g5 j7 | 1 | 0.1 % |
| homogeneous network | 1 | 0.1 % |
| pdelset2 | 1 | 0.1 % |
| accuracy and stability | 1 | 0.1 % |
| pivoting banded systems | 1 | 0.1 % |
| pblas utility routines | 1 | 0.1 % |
| gif intitle index-of | 1 | 0.1 % |
| pdpotrf.f | 1 | 0.1 % |
| max modulo jp | 1 | 0.1 % |
| parallel program efficiency definition | 1 | 0.1 % |
| what is homogeneouus network | 1 | 0.1 % |
| row block | 1 | 0.1 % |
| capss sparse | 1 | 0.1 % |
| for all error calculations | 1 | 0.1 % |
| scalapack diagonalization subroutine | 1 | 0.1 % |
| parallel laspack | 1 | 0.1 % |
|
Advanced Web Statistics 7.0 (build 1.971) - Created by awstats (plugins: hashfiles, decodeutfkeys, tooltips)