SPEC SFS 1 Baseline Summary

097.LADDIS (Volume 6, Issue 1, March 1994)

IBM Corporation

7051 Power Network Dataserver(1EP/1FP)


       NFS         Average       
       Throughput  NFS           
       SPECnfs_A93 Response Time 
       Ops/Sec     Milliseconds  
       ----------- ------------- 
       48          11.1
       80          11.9
       127         13.9
       176         15.9
       225         18.3
       274         20.3
       323         23.5
       371         26.5
       419         31.3
       468         39.4
       505         47.5
SPEC SFS 1 Baseline Result:
   505 SPECnfs_A93 Ops/Sec @ 47.5 msec ==> 51 SPECnfs_A93 Users

Server Hardware
CPU, Memory, & Power
Model Number: IBM 7051
File Processor: FP-II (M68030, 25MHz)
Number of FPs: 1
Metadata Cache: 16 MB per FP-11
Other Cache: None
Host Processor: n/a for NFS
Memory: 192MB Data Cache
UPS: None
Other Hardware: None
Server Software
OS Version: AIX 3.2.4 w/PND 1.0.2
Other Software: None
File System: 7051 LFS (BSD FFS)

Load Generators(LGs)
Number of Load Generators: 4
Processes Per Load Generator: 5
Biod_Max_Reads: 2
Biod_Max_Writes: 2

Disk Subsystem & Filesystems (Full Configuration Follows)
Num Disk Controllers: 1 SP-III
Num Disks: 20 2.0 GB Modules
Num File Systems: 4 (F1-F4)

Network Subsystem (Full Configuration Follows)
Num Net Controllers: 1 EP-III
Num Networks: 2
Type Network: Ethernet

Server Tuning (Also see Notes/Tuning below)
Buffer Cache Size: 192 MB (Data Cache)
Num NFS Daemons: 32 (32 per EP-III)
Fileset Size: 5.75 GB

Hardware Availability: Feb-94
Software Availability: Feb-94

License #: 11
Tested : Jan-94
Of: San Jose, CA

Notes/Summary Of Tuning Parameters
Note: Storage Processors are references as "SP0"; File Processors as "FP0"; Ethernet Processors as "EP0"
The filesystems were mapped to the File Processors as follows - FP0:F1,F2,F3,F4
All Load Generators used the same LADDIS Mount Points list with the same /etc/filesystems entries
The LADDIS Prime Client was "client1e". The 7051 acted as the router between networks. ThinNet Ethernet cables/tranceivers were used.
2 1GB drives are packaged in 1 Disk Modules. Automatic striping between the two drives is provided by the controller using 128K striping width.
Each drive provides 256KB buffer (512KB per Module)

Detailed Server Description
Network Subsystem
Ethernet Processor Model:
EP-III Description:
Number of EP-III Processors:
Number of Ethernets:

Disk Subsystem & Filesystems
Storage Processor Model:
SP-III Description:
Number of SP-III Processors:
Number of Parallel SCSI channels per SP-III:
Number of disks used by LADDIS per SP-III:
(RISC System/6000 340R acting as a Host Processor supported an additional 1 GB SCSI disk for OS)
Type of Disks:
Filesystems per SP-III:
VP Description:
Write Accellerator Type:
Write Accellerators per SP-III:

Detailed Load Generator (LG) Description
       Model:                   IBM RISC System/6000 PC
       # of CPUs:               1              
       Main Mem:                64MB           
       OS:                      AIX 3.2.4
       Compiler:                XL C/6000 Version 1.2.1

Testbed Configuration
       Load Generator Load Generator         Target          Filesystem    
       Number         Type           Network Filesystems     Mount Options 
       -------------- -------------- ------- --------------- ------------- 
       1              LG1            N1      F1,F2,F3        Default
       2              LG1            N1      F2,F1,F4        Default
       3              LG1            N2      F3,F4,F1        Default
       4              LG1            N2      F4,F3,F2        Default

Questions? Concerns? Send mail to utpds@cs.utk.edu