LAPACK  3.8.0
LAPACK: Linear Algebra PACKage

◆ schkee()

program schkee ( )

SCHKEE

Purpose:
 SCHKEE tests the REAL LAPACK subroutines for the matrix
 eigenvalue problem.  The test paths in this version are

 NEP (Nonsymmetric Eigenvalue Problem):
     Test SGEHRD, SORGHR, SHSEQR, STREVC, SHSEIN, and SORMHR

 SEP (Symmetric Eigenvalue Problem):
     Test SSYTRD, SORGTR, SSTEQR, SSTERF, SSTEIN, SSTEDC,
     and drivers SSYEV(X), SSBEV(X), SSPEV(X), SSTEV(X),
                 SSYEVD,   SSBEVD,   SSPEVD,   SSTEVD

 SVD (Singular Value Decomposition):
     Test SGEBRD, SORGBR, SBDSQR, SBDSDC
     and the drivers SGESVD, SGESDD

 SEV (Nonsymmetric Eigenvalue/eigenvector Driver):
     Test SGEEV

 SES (Nonsymmetric Schur form Driver):
     Test SGEES

 SVX (Nonsymmetric Eigenvalue/eigenvector Expert Driver):
     Test SGEEVX

 SSX (Nonsymmetric Schur form Expert Driver):
     Test SGEESX

 SGG (Generalized Nonsymmetric Eigenvalue Problem):
     Test SGGHD3, SGGBAL, SGGBAK, SHGEQZ, and STGEVC

 SGS (Generalized Nonsymmetric Schur form Driver):
     Test SGGES

 SGV (Generalized Nonsymmetric Eigenvalue/eigenvector Driver):
     Test SGGEV

 SGX (Generalized Nonsymmetric Schur form Expert Driver):
     Test SGGESX

 SXV (Generalized Nonsymmetric Eigenvalue/eigenvector Expert Driver):
     Test SGGEVX

 SSG (Symmetric Generalized Eigenvalue Problem):
     Test SSYGST, SSYGV, SSYGVD, SSYGVX, SSPGST, SSPGV, SSPGVD,
     SSPGVX, SSBGST, SSBGV, SSBGVD, and SSBGVX

 SSB (Symmetric Band Eigenvalue Problem):
     Test SSBTRD

 SBB (Band Singular Value Decomposition):
     Test SGBBRD

 SEC (Eigencondition estimation):
     Test SLALN2, SLASY2, SLAEQU, SLAEXC, STRSYL, STREXC, STRSNA,
     STRSEN, and SLAQTR

 SBL (Balancing a general matrix)
     Test SGEBAL

 SBK (Back transformation on a balanced matrix)
     Test SGEBAK

 SGL (Balancing a matrix pair)
     Test SGGBAL

 SGK (Back transformation on a matrix pair)
     Test SGGBAK

 GLM (Generalized Linear Regression Model):
     Tests SGGGLM

 GQR (Generalized QR and RQ factorizations):
     Tests SGGQRF and SGGRQF

 GSV (Generalized Singular Value Decomposition):
     Tests SGGSVD, SGGSVP, STGSJA, SLAGS2, SLAPLL, and SLAPMT

 CSD (CS decomposition):
     Tests SORCSD

 LSE (Constrained Linear Least Squares):
     Tests SGGLSE

 Each test path has a different set of inputs, but the data sets for
 the driver routines xEV, xES, xVX, and xSX can be concatenated in a
 single input file.  The first line of input should contain one of the
 3-character path names in columns 1-3.  The number of remaining lines
 depends on what is found on the first line.

 The number of matrix types used in testing is often controllable from
 the input file.  The number of matrix types for each path, and the
 test routine that describes them, is as follows:

 Path name(s)  Types    Test routine

 SHS or NEP      21     SCHKHS
 SST or SEP      21     SCHKST (routines)
                 18     SDRVST (drivers)
 SBD or SVD      16     SCHKBD (routines)
                  5     SDRVBD (drivers)
 SEV             21     SDRVEV
 SES             21     SDRVES
 SVX             21     SDRVVX
 SSX             21     SDRVSX
 SGG             26     SCHKGG (routines)
 SGS             26     SDRGES
 SGX              5     SDRGSX
 SGV             26     SDRGEV
 SXV              2     SDRGVX
 SSG             21     SDRVSG
 SSB             15     SCHKSB
 SBB             15     SCHKBB
 SEC              -     SCHKEC
 SBL              -     SCHKBL
 SBK              -     SCHKBK
 SGL              -     SCHKGL
 SGK              -     SCHKGK
 GLM              8     SCKGLM
 GQR              8     SCKGQR
 GSV              8     SCKGSV
 CSD              3     SCKCSD
 LSE              8     SCKLSE

-----------------------------------------------------------------------

 NEP input file:

 line 2:  NN, INTEGER
          Number of values of N.

 line 3:  NVAL, INTEGER array, dimension (NN)
          The values for the matrix dimension N.

 line 4:  NPARMS, INTEGER
          Number of values of the parameters NB, NBMIN, NX, NS, and
          MAXB.

 line 5:  NBVAL, INTEGER array, dimension (NPARMS)
          The values for the blocksize NB.

 line 6:  NBMIN, INTEGER array, dimension (NPARMS)
          The values for the minimum blocksize NBMIN.

 line 7:  NXVAL, INTEGER array, dimension (NPARMS)
          The values for the crossover point NX.

 line 8:  INMIN, INTEGER array, dimension (NPARMS)
          LAHQR vs TTQRE crossover point, >= 11

 line 9:  INWIN, INTEGER array, dimension (NPARMS)
          recommended deflation window size

 line 10: INIBL, INTEGER array, dimension (NPARMS)
          nibble crossover point

 line 11:  ISHFTS, INTEGER array, dimension (NPARMS)
          number of simultaneous shifts)

 line 12:  IACC22, INTEGER array, dimension (NPARMS)
          select structured matrix multiply: 0, 1 or 2)

 line 13: THRESH
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.  To have all of the test
          ratios printed, use THRESH = 0.0 .

 line 14: NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 14 was 2:

 line 15: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 15-EOF:  The remaining lines occur in sets of 1 or 2 and allow
          the user to specify the matrix types.  Each line contains
          a 3-character path name in columns 1-3, and the number
          of matrix types must be the first nonblank item in columns
          4-80.  If the number of matrix types is at least 1 but is
          less than the maximum number of possible types, a second
          line will be read to get the numbers of the matrix types to
          be used.  For example,
 NEP 21
          requests all of the matrix types for the nonsymmetric
          eigenvalue problem, while
 NEP  4
 9 10 11 12
          requests only matrices of type 9, 10, 11, and 12.

          The valid 3-character path names are 'NEP' or 'SHS' for the
          nonsymmetric eigenvalue routines.

-----------------------------------------------------------------------

 SEP or SSG input file:

 line 2:  NN, INTEGER
          Number of values of N.

 line 3:  NVAL, INTEGER array, dimension (NN)
          The values for the matrix dimension N.

 line 4:  NPARMS, INTEGER
          Number of values of the parameters NB, NBMIN, and NX.

 line 5:  NBVAL, INTEGER array, dimension (NPARMS)
          The values for the blocksize NB.

 line 6:  NBMIN, INTEGER array, dimension (NPARMS)
          The values for the minimum blocksize NBMIN.

 line 7:  NXVAL, INTEGER array, dimension (NPARMS)
          The values for the crossover point NX.

 line 8:  THRESH
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 9:  TSTCHK, LOGICAL
          Flag indicating whether or not to test the LAPACK routines.

 line 10: TSTDRV, LOGICAL
          Flag indicating whether or not to test the driver routines.

 line 11: TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 12: NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 12 was 2:

 line 13: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 13-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path names are 'SEP' or 'SST' for the
          symmetric eigenvalue routines and driver routines, and
          'SSG' for the routines for the symmetric generalized
          eigenvalue problem.

-----------------------------------------------------------------------

 SVD input file:

 line 2:  NN, INTEGER
          Number of values of M and N.

 line 3:  MVAL, INTEGER array, dimension (NN)
          The values for the matrix row dimension M.

 line 4:  NVAL, INTEGER array, dimension (NN)
          The values for the matrix column dimension N.

 line 5:  NPARMS, INTEGER
          Number of values of the parameter NB, NBMIN, NX, and NRHS.

 line 6:  NBVAL, INTEGER array, dimension (NPARMS)
          The values for the blocksize NB.

 line 7:  NBMIN, INTEGER array, dimension (NPARMS)
          The values for the minimum blocksize NBMIN.

 line 8:  NXVAL, INTEGER array, dimension (NPARMS)
          The values for the crossover point NX.

 line 9:  NSVAL, INTEGER array, dimension (NPARMS)
          The values for the number of right hand sides NRHS.

 line 10: THRESH
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 11: TSTCHK, LOGICAL
          Flag indicating whether or not to test the LAPACK routines.

 line 12: TSTDRV, LOGICAL
          Flag indicating whether or not to test the driver routines.

 line 13: TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 14: NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 14 was 2:

 line 15: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 15-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path names are 'SVD' or 'SBD' for both the
          SVD routines and the SVD driver routines.

-----------------------------------------------------------------------

 SEV and SES data files:

 line 1:  'SEV' or 'SES' in columns 1 to 3.

 line 2:  NSIZES, INTEGER
          Number of sizes of matrices to use. Should be at least 0
          and at most 20. If NSIZES = 0, no testing is done
          (although the remaining  3 lines are still read).

 line 3:  NN, INTEGER array, dimension(NSIZES)
          Dimensions of matrices to be tested.

 line 4:  NB, NBMIN, NX, NS, NBCOL, INTEGERs
          These integer parameters determine how blocking is done
          (see ILAENV for details)
          NB     : block size
          NBMIN  : minimum block size
          NX     : minimum dimension for blocking
          NS     : number of shifts in xHSEQR
          NBCOL  : minimum column dimension for blocking

 line 5:  THRESH, REAL
          The test threshold against which computed residuals are
          compared. Should generally be in the range from 10. to 20.
          If it is 0., all test case data will be printed.

 line 6:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits.

 line 7:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 7 was 2:

 line 8:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 9 and following:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'SEV' to test SGEEV, or
          'SES' to test SGEES.

-----------------------------------------------------------------------

 The SVX data has two parts. The first part is identical to SEV,
 and the second part consists of test matrices with precomputed
 solutions.

 line 1:  'SVX' in columns 1-3.

 line 2:  NSIZES, INTEGER
          If NSIZES = 0, no testing of randomly generated examples
          is done, but any precomputed examples are tested.

 line 3:  NN, INTEGER array, dimension(NSIZES)

 line 4:  NB, NBMIN, NX, NS, NBCOL, INTEGERs

 line 5:  THRESH, REAL

 line 6:  TSTERR, LOGICAL

 line 7:  NEWSD, INTEGER

 If line 7 was 2:

 line 8:  INTEGER array, dimension (4)

 lines 9 and following: The first line contains 'SVX' in columns 1-3
          followed by the number of matrix types, possibly with
          a second line to specify certain matrix types.
          If the number of matrix types = 0, no testing of randomly
          generated examples is done, but any precomputed examples
          are tested.

 remaining lines : Each matrix is stored on 1+2*N lines, where N is
          its dimension. The first line contains the dimension (a
          single integer). The next N lines contain the matrix, one
          row per line. The last N lines correspond to each
          eigenvalue. Each of these last N lines contains 4 real
          values: the real part of the eigenvalue, the imaginary
          part of the eigenvalue, the reciprocal condition number of
          the eigenvalues, and the reciprocal condition number of the
          eigenvector.  The end of data is indicated by dimension N=0.
          Even if no data is to be tested, there must be at least one
          line containing N=0.

-----------------------------------------------------------------------

 The SSX data is like SVX. The first part is identical to SEV, and the
 second part consists of test matrices with precomputed solutions.

 line 1:  'SSX' in columns 1-3.

 line 2:  NSIZES, INTEGER
          If NSIZES = 0, no testing of randomly generated examples
          is done, but any precomputed examples are tested.

 line 3:  NN, INTEGER array, dimension(NSIZES)

 line 4:  NB, NBMIN, NX, NS, NBCOL, INTEGERs

 line 5:  THRESH, REAL

 line 6:  TSTERR, LOGICAL

 line 7:  NEWSD, INTEGER

 If line 7 was 2:

 line 8:  INTEGER array, dimension (4)

 lines 9 and following: The first line contains 'SSX' in columns 1-3
          followed by the number of matrix types, possibly with
          a second line to specify certain matrix types.
          If the number of matrix types = 0, no testing of randomly
          generated examples is done, but any precomputed examples
          are tested.

 remaining lines : Each matrix is stored on 3+N lines, where N is its
          dimension. The first line contains the dimension N and the
          dimension M of an invariant subspace. The second line
          contains M integers, identifying the eigenvalues in the
          invariant subspace (by their position in a list of
          eigenvalues ordered by increasing real part). The next N
          lines contain the matrix. The last line contains the
          reciprocal condition number for the average of the selected
          eigenvalues, and the reciprocal condition number for the
          corresponding right invariant subspace. The end of data is
          indicated by a line containing N=0 and M=0. Even if no data
          is to be tested, there must be at least one line containing
          N=0 and M=0.

-----------------------------------------------------------------------

 SGG input file:

 line 2:  NN, INTEGER
          Number of values of N.

 line 3:  NVAL, INTEGER array, dimension (NN)
          The values for the matrix dimension N.

 line 4:  NPARMS, INTEGER
          Number of values of the parameters NB, NBMIN, NS, MAXB, and
          NBCOL.

 line 5:  NBVAL, INTEGER array, dimension (NPARMS)
          The values for the blocksize NB.

 line 6:  NBMIN, INTEGER array, dimension (NPARMS)
          The values for NBMIN, the minimum row dimension for blocks.

 line 7:  NSVAL, INTEGER array, dimension (NPARMS)
          The values for the number of shifts.

 line 8:  MXBVAL, INTEGER array, dimension (NPARMS)
          The values for MAXB, used in determining minimum blocksize.

 line 9:  IACC22, INTEGER array, dimension (NPARMS)
          select structured matrix multiply: 1 or 2)

 line 10: NBCOL, INTEGER array, dimension (NPARMS)
          The values for NBCOL, the minimum column dimension for
          blocks.

 line 11: THRESH
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 12: TSTCHK, LOGICAL
          Flag indicating whether or not to test the LAPACK routines.

 line 13: TSTDRV, LOGICAL
          Flag indicating whether or not to test the driver routines.

 line 14: TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 15: NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 15 was 2:

 line 16: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 17-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'SGG' for the generalized
          eigenvalue problem routines and driver routines.

-----------------------------------------------------------------------

 SGS and SGV input files:

 line 1:  'SGS' or 'SGV' in columns 1 to 3.

 line 2:  NN, INTEGER
          Number of values of N.

 line 3:  NVAL, INTEGER array, dimension(NN)
          Dimensions of matrices to be tested.

 line 4:  NB, NBMIN, NX, NS, NBCOL, INTEGERs
          These integer parameters determine how blocking is done
          (see ILAENV for details)
          NB     : block size
          NBMIN  : minimum block size
          NX     : minimum dimension for blocking
          NS     : number of shifts in xHGEQR
          NBCOL  : minimum column dimension for blocking

 line 5:  THRESH, REAL
          The test threshold against which computed residuals are
          compared. Should generally be in the range from 10. to 20.
          If it is 0., all test case data will be printed.

 line 6:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits.

 line 7:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 17 was 2:

 line 7:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 7-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'SGS' for the generalized
          eigenvalue problem routines and driver routines.

-----------------------------------------------------------------------

 SXV input files:

 line 1:  'SXV' in columns 1 to 3.

 line 2:  N, INTEGER
          Value of N.

 line 3:  NB, NBMIN, NX, NS, NBCOL, INTEGERs
          These integer parameters determine how blocking is done
          (see ILAENV for details)
          NB     : block size
          NBMIN  : minimum block size
          NX     : minimum dimension for blocking
          NS     : number of shifts in xHGEQR
          NBCOL  : minimum column dimension for blocking

 line 4:  THRESH, REAL
          The test threshold against which computed residuals are
          compared. Should generally be in the range from 10. to 20.
          Information will be printed about each test for which the
          test ratio is greater than or equal to the threshold.

 line 5:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 6:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 6 was 2:

 line 7: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 If line 2 was 0:

 line 7-EOF: Precomputed examples are tested.

 remaining lines : Each example is stored on 3+2*N lines, where N is
          its dimension. The first line contains the dimension (a
          single integer). The next N lines contain the matrix A, one
          row per line. The next N lines contain the matrix B.  The
          next line contains the reciprocals of the eigenvalue
          condition numbers.  The last line contains the reciprocals of
          the eigenvector condition numbers.  The end of data is
          indicated by dimension N=0.  Even if no data is to be tested,
          there must be at least one line containing N=0.

-----------------------------------------------------------------------

 SGX input files:

 line 1:  'SGX' in columns 1 to 3.

 line 2:  N, INTEGER
          Value of N.

 line 3:  NB, NBMIN, NX, NS, NBCOL, INTEGERs
          These integer parameters determine how blocking is done
          (see ILAENV for details)
          NB     : block size
          NBMIN  : minimum block size
          NX     : minimum dimension for blocking
          NS     : number of shifts in xHGEQR
          NBCOL  : minimum column dimension for blocking

 line 4:  THRESH, REAL
          The test threshold against which computed residuals are
          compared. Should generally be in the range from 10. to 20.
          Information will be printed about each test for which the
          test ratio is greater than or equal to the threshold.

 line 5:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 6:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 6 was 2:

 line 7: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 If line 2 was 0:

 line 7-EOF: Precomputed examples are tested.

 remaining lines : Each example is stored on 3+2*N lines, where N is
          its dimension. The first line contains the dimension (a
          single integer).  The next line contains an integer k such
          that only the last k eigenvalues will be selected and appear
          in the leading diagonal blocks of $A$ and $B$. The next N
          lines contain the matrix A, one row per line.  The next N
          lines contain the matrix B.  The last line contains the
          reciprocal of the eigenvalue cluster condition number and the
          reciprocal of the deflating subspace (associated with the
          selected eigencluster) condition number.  The end of data is
          indicated by dimension N=0.  Even if no data is to be tested,
          there must be at least one line containing N=0.

-----------------------------------------------------------------------

 SSB input file:

 line 2:  NN, INTEGER
          Number of values of N.

 line 3:  NVAL, INTEGER array, dimension (NN)
          The values for the matrix dimension N.

 line 4:  NK, INTEGER
          Number of values of K.

 line 5:  KVAL, INTEGER array, dimension (NK)
          The values for the matrix dimension K.

 line 6:  THRESH
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 7:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 7 was 2:

 line 8:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 8-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'SSB'.

-----------------------------------------------------------------------

 SBB input file:

 line 2:  NN, INTEGER
          Number of values of M and N.

 line 3:  MVAL, INTEGER array, dimension (NN)
          The values for the matrix row dimension M.

 line 4:  NVAL, INTEGER array, dimension (NN)
          The values for the matrix column dimension N.

 line 4:  NK, INTEGER
          Number of values of K.

 line 5:  KVAL, INTEGER array, dimension (NK)
          The values for the matrix bandwidth K.

 line 6:  NPARMS, INTEGER
          Number of values of the parameter NRHS

 line 7:  NSVAL, INTEGER array, dimension (NPARMS)
          The values for the number of right hand sides NRHS.

 line 8:  THRESH
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 9:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 9 was 2:

 line 10: INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 10-EOF:  Lines specifying matrix types, as for SVD.
          The 3-character path name is 'SBB'.

-----------------------------------------------------------------------

 SEC input file:

 line  2: THRESH, REAL
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 lines  3-EOF:

 Input for testing the eigencondition routines consists of a set of
 specially constructed test cases and their solutions.  The data
 format is not intended to be modified by the user.

-----------------------------------------------------------------------

 SBL and SBK input files:

 line 1:  'SBL' in columns 1-3 to test SGEBAL, or 'SBK' in
          columns 1-3 to test SGEBAK.

 The remaining lines consist of specially constructed test cases.

-----------------------------------------------------------------------

 SGL and SGK input files:

 line 1:  'SGL' in columns 1-3 to test SGGBAL, or 'SGK' in
          columns 1-3 to test SGGBAK.

 The remaining lines consist of specially constructed test cases.

-----------------------------------------------------------------------

 GLM data file:

 line 1:  'GLM' in columns 1 to 3.

 line 2:  NN, INTEGER
          Number of values of M, P, and N.

 line 3:  MVAL, INTEGER array, dimension(NN)
          Values of M (row dimension).

 line 4:  PVAL, INTEGER array, dimension(NN)
          Values of P (row dimension).

 line 5:  NVAL, INTEGER array, dimension(NN)
          Values of N (column dimension), note M <= N <= M+P.

 line 6:  THRESH, REAL
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 7:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 8:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 8 was 2:

 line 9:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 9-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'GLM' for the generalized
          linear regression model routines.

-----------------------------------------------------------------------

 GQR data file:

 line 1:  'GQR' in columns 1 to 3.

 line 2:  NN, INTEGER
          Number of values of M, P, and N.

 line 3:  MVAL, INTEGER array, dimension(NN)
          Values of M.

 line 4:  PVAL, INTEGER array, dimension(NN)
          Values of P.

 line 5:  NVAL, INTEGER array, dimension(NN)
          Values of N.

 line 6:  THRESH, REAL
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 7:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 8:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 8 was 2:

 line 9:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 9-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'GQR' for the generalized
          QR and RQ routines.

-----------------------------------------------------------------------

 GSV data file:

 line 1:  'GSV' in columns 1 to 3.

 line 2:  NN, INTEGER
          Number of values of M, P, and N.

 line 3:  MVAL, INTEGER array, dimension(NN)
          Values of M (row dimension).

 line 4:  PVAL, INTEGER array, dimension(NN)
          Values of P (row dimension).

 line 5:  NVAL, INTEGER array, dimension(NN)
          Values of N (column dimension).

 line 6:  THRESH, REAL
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 7:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 8:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 8 was 2:

 line 9:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 9-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'GSV' for the generalized
          SVD routines.

-----------------------------------------------------------------------

 CSD data file:

 line 1:  'CSD' in columns 1 to 3.

 line 2:  NM, INTEGER
          Number of values of M, P, and N.

 line 3:  MVAL, INTEGER array, dimension(NM)
          Values of M (row and column dimension of orthogonal matrix).

 line 4:  PVAL, INTEGER array, dimension(NM)
          Values of P (row dimension of top-left block).

 line 5:  NVAL, INTEGER array, dimension(NM)
          Values of N (column dimension of top-left block).

 line 6:  THRESH, REAL
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 7:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 8:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 8 was 2:

 line 9:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 9-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'CSD' for the CSD routine.

-----------------------------------------------------------------------

 LSE data file:

 line 1:  'LSE' in columns 1 to 3.

 line 2:  NN, INTEGER
          Number of values of M, P, and N.

 line 3:  MVAL, INTEGER array, dimension(NN)
          Values of M.

 line 4:  PVAL, INTEGER array, dimension(NN)
          Values of P.

 line 5:  NVAL, INTEGER array, dimension(NN)
          Values of N, note P <= N <= P+M.

 line 6:  THRESH, REAL
          Threshold value for the test ratios.  Information will be
          printed about each test for which the test ratio is greater
          than or equal to the threshold.

 line 7:  TSTERR, LOGICAL
          Flag indicating whether or not to test the error exits for
          the LAPACK routines and driver routines.

 line 8:  NEWSD, INTEGER
          A code indicating how to set the random number seed.
          = 0:  Set the seed to a default value before each run
          = 1:  Initialize the seed to a default value only before the
                first run
          = 2:  Like 1, but use the seed values on the next line

 If line 8 was 2:

 line 9:  INTEGER array, dimension (4)
          Four integer values for the random number seed.

 lines 9-EOF:  Lines specifying matrix types, as for NEP.
          The 3-character path name is 'GSV' for the generalized
          SVD routines.

-----------------------------------------------------------------------

 NMAX is currently set to 132 and must be at least 12 for some of the
 precomputed examples, and LWORK = NMAX*(5*NMAX+5)+1 in the parameter
 statements below.  For SVD, we assume NRHS may be as big as N.  The
 parameter NEED is set to 14 to allow for 14 N-by-N matrices for SGG.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date
June 2016

Definition at line 1041 of file schkee.f.

Here is the call graph for this function: